lkml.org 
[lkml]   [2011]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [patch 2/4] This patch enhances OProfile to support System zs hardware sampling feature
From
Date
Robert, here is the 2nd part...

Heinz

On Mon, 2011-01-03 at 20:02 +0100, Robert Richter wrote:
> On 20.12.10 08:05:43, graalfs@linux.vnet.ibm.com wrote:
> > From: graalfs@linux.vnet.ibm.com
> >
> > OProfile is enhanced to export all files for controlling System z's hardware sampling,
> > and to invoke hwsampler exported functions to initialize and use System z's hardware sampling.
> >
> > The patch invokes hwsampler_setup() during oprofile init and exports following
> > hwsampler files under oprofilefs if hwsampler's setup succeeded:
> >
> > A new directory for hardware sampling based files
> >
> > /dev/oprofile/hwsampling/
> >
> > The userland daemon must explicitly write to the following files
> > to disable (or enable) hardware based sampling
> >
> > /dev/oprofile/hwsampling/hwsampler
> >
> > to modify the actual sampling rate
> >
> > /dev/oprofile/hwsampling/hw_interval
> >
> > to modify the amount of sampling memory (measured in 4K pages)
> >
> > /dev/oprofile/hwsampling/hw_sdbt_blocks
> >
> > The following files are read only and show
> > the possible minimum sampling rate
> >
> > /dev/oprofile/hwsampling/hw_min_interval
> >
> > the possible maximum sampling rate
> >
> > /dev/oprofile/hwsampling/hw_max_interval
> >
> > The patch splits the oprofile_timer_[init/exit] function so that it can be also called
> > through user context (oprofilefs) to avoid kernel oops.
> >
> > Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
> > Signed-off-by: Maran Pakkirisamy <maranp@linux.vnet.ibm.com>
> > Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
> > ---
> > arch/s390/oprofile/Makefile | 1
> > arch/s390/oprofile/hwsampler_files.c | 120 +++++++++++++++++++++++++++++++++++
>
> I would rather see a file hwsampler.c here that contains all oprofile
> hwsampler code in it and also sets up a struct oprofile_operations*
> ops.
>

I added hwsampler.c and also kept the hwsampler_files.c

> Doing so, most of global functions and variables below can be made
> static.
>
> > arch/s390/oprofile/init.c | 35 ++++++++++
>
> We should find a better solution than changing all those files only
> for a single architecture:
>
> > drivers/oprofile/oprof.c | 37 ++++++++++
> > drivers/oprofile/oprof.h | 2
> > drivers/oprofile/timer_int.c | 16 +++-
> > include/linux/oprofile.h | 15 ++++
>
> I want to see most of this in arch/s390.
>

mostly done, but we need to possibility to switch the modes...
see also below

> > 7 files changed, 223 insertions(+), 3 deletions(-)
> >
> > Index: linux-2.6/arch/s390/oprofile/Makefile
> > ===================================================================
> > --- linux-2.6.orig/arch/s390/oprofile/Makefile
> > +++ linux-2.6/arch/s390/oprofile/Makefile
> > @@ -8,6 +8,7 @@ DRIVER_OBJS = $(addprefix ../../../drive
> > timer_int.o )
> >
> > oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
> > +oprofile-y += $(if $(CONFIG_HWSAMPLER), hwsampler_files.o,)
> >
> > HW_SAMPLER_DRIVER_OBJS = $(addprefix ../../../drivers/s390/hwsampler/, \
> > hwsampler-main.o smpctl.o )
> > Index: linux-2.6/arch/s390/oprofile/hwsampler_files.c
> > ===================================================================
> > --- /dev/null
> > +++ linux-2.6/arch/s390/oprofile/hwsampler_files.c
> > @@ -0,0 +1,120 @@
> > +/**
> > + * arch/s390/oprofile/hwsampler_files.c
> > + *
> > + * Copyright IBM Corp. 2010
> > + * Author: Mahesh Salgaonkar (mahesh@linux.vnet.ibm.com)
> > + */
> > +#include <linux/oprofile.h>
> > +#include <linux/errno.h>
> > +#include <linux/fs.h>
> > +
> > +#include <asm/hwsampler.h>
> > +
> > +#define DEFAULT_INTERVAL 4096
> > +
> > +#define DEFAULT_SDBT_BLOCKS 1
> > +#define DEFAULT_SDB_BLOCKS 511
> > +
> > +static unsigned long oprofile_hw_interval = DEFAULT_INTERVAL;
> > +unsigned long oprofile_min_interval;
> > +unsigned long oprofile_max_interval;
>
> This could be static.

OK, done

>
> > +
> > +static unsigned long oprofile_sdbt_blocks = DEFAULT_SDBT_BLOCKS;
> > +static unsigned long oprofile_sdb_blocks = DEFAULT_SDB_BLOCKS;
> > +
> > +static unsigned long oprofile_hwsampler;
> > +
> > +static int oprofile_hwsampler_start(void)
> > +{
> > + int retval;
> > +
> > + printk(KERN_INFO "oprofile_hwsampler_start\n");
>
> This looks like a debug msg.

OK, removed

>
> > +
> > + retval = hwsampler_allocate(oprofile_sdbt_blocks, oprofile_sdb_blocks);
> > + if (retval)
> > + return retval;
> > +
> > + retval = hwsampler_start_all(oprofile_hw_interval);
> > +
> > + return retval;
> > +}
> > +
> > +static void oprofile_hwsampler_stop(void)
> > +{
> > + printk(KERN_INFO "oprofile_hwsampler_stop\n");
>
> Same here.

OK, removed

>
> > +
> > + hwsampler_stop_all();
> > + hwsampler_deallocate();
> > + return;
> > +}
> > +
> > +int oprofile_arch_set_hwsampler(struct oprofile_operations *ops)
> > +{
> > + printk(KERN_INFO "oprofile: using hardware sampling\n");
> > + ops->start = oprofile_hwsampler_start;
> > + ops->stop = oprofile_hwsampler_stop;
> > + ops->cpu_type = "timer";
>
> Wouldn't it be better to have a different cpu_type string here, I
> don't think the oprofilefs interface is exactly the same as for timer
> mode. How the daemon distinguishs between both modes?

the user space daemon can live with this unchanged when the kernel is
configured for OProfile and CPUMF hardware sampling.

We plan to update the daemon with new options for hardware sampling also
and to prepare opreport for appropriate message headers.

>
> > +
> > + return 0;
> > +}
> > +
> > +static ssize_t hwsampler_read(struct file *file, char __user *buf,
> > + size_t count, loff_t *offset)
> > +{
> > + return oprofilefs_ulong_to_user(oprofile_hwsampler, buf, count, offset);
> > +}
> > +
> > +static ssize_t hwsampler_write(struct file *file, char const __user *buf,
> > + size_t count, loff_t *offset)
> > +{
> > + unsigned long val;
> > + int retval;
> > +
> > + if (*offset)
> > + return -EINVAL;
> > +
> > + retval = oprofilefs_ulong_from_user(&val, buf, count);
> > + if (retval)
> > + return retval;
> > +
> > + if (oprofile_hwsampler == val)
> > + return -EINVAL;
> > +
> > + retval = oprofile_set_hwsampler(val);
> > +
> > + if (retval)
> > + return retval;
> > +
> > + oprofile_hwsampler = val;
> > + return count;
> > +}
> > +
> > +static const struct file_operations hwsampler_fops = {
> > + .read = hwsampler_read,
> > + .write = hwsampler_write,
> > +};
> > +
> > +int oprofile_create_hwsampling_files(struct super_block *sb,
> > + struct dentry *root)
>
> This can be made static too.

OK, done

>
> > +{
> > + struct dentry *hw_dir;
> > +
> > + /* reinitialize default values */
> > + oprofile_hwsampler = 1;
> > +
> > + hw_dir = oprofilefs_mkdir(sb, root, "hwsampling");
> > + if (!hw_dir)
> > + return -EINVAL;
> > +
> > + oprofilefs_create_file(sb, hw_dir, "hwsampler", &hwsampler_fops);
> > + oprofilefs_create_ulong(sb, hw_dir, "hw_interval",
> > + &oprofile_hw_interval);
> > + oprofilefs_create_ro_ulong(sb, hw_dir, "hw_min_interval",
> > + &oprofile_min_interval);
> > + oprofilefs_create_ro_ulong(sb, hw_dir, "hw_max_interval",
> > + &oprofile_max_interval);
> > + oprofilefs_create_ulong(sb, hw_dir, "hw_sdbt_blocks",
> > + &oprofile_sdbt_blocks);
> > +
> > + return 0;
> > +}
> > Index: linux-2.6/drivers/oprofile/oprof.c
> > ===================================================================
> > --- linux-2.6.orig/drivers/oprofile/oprof.c
> > +++ linux-2.6/drivers/oprofile/oprof.c
> > @@ -239,10 +239,43 @@ int oprofile_set_ulong(unsigned long *ad
> > return err;
> > }
> >
> > +#ifdef CONFIG_OPROFILE_HWSAMPLING_MODE
> > +int oprofile_set_hwsampler(unsigned long val)
> > +{
> > + int err = 0;
> > +
> > + mutex_lock(&start_mutex);
> > +
> > + if (oprofile_started) {
> > + err = -EBUSY;
> > + goto out;
> > + }
> > +
> > + switch (val) {
> > + case 1:
> > + /* Switch to hardware sampling. */
> > + __oprofile_timer_exit();
> > + err = oprofile_arch_set_hwsampler(&oprofile_ops);
> > + break;
> > + case 0:
> > + printk(KERN_INFO "oprofile: using timer interrupt.\n");
> > + err = __oprofile_timer_init(&oprofile_ops);
> > + break;
>
> Is there a use case for switching the mode at runtime? There are
> kernel parameters to force timer mode while booting or loading the
> module. I don't like exporting all these timer and hwsampler
> functions. We could avoid this by making hwsampler architectural code
> and leaving the timer code as it is.

hardware sampling might have a need for lots of kernel memory, which
might not be available in all circumstances. It was nice if one could
switch to timer based sampling in such a case.

>
> > + default:
> > + err = -EINVAL;
> > + }
> > +
> > +out:
> > + mutex_unlock(&start_mutex);
> > + return err;
> > +}
> > +#endif /* CONFIG_OPROFILE_HWSAMPLING_MODE */
> > +
> > static int __init oprofile_init(void)
> > {
> > int err;
> >
> > + memset(&oprofile_ops, 0, sizeof(oprofile_ops));
>
> The struct is already initialized to 0.

OK, statement removed

>
> > err = oprofile_arch_init(&oprofile_ops);
> > if (err < 0 || timer) {
> > printk(KERN_INFO "oprofile: using timer interrupt.\n");
> > @@ -250,6 +283,10 @@ static int __init oprofile_init(void)
> > if (err)
> > return err;
> > }
> > +#ifdef CONFIG_OPROFILE_HWSAMPLING_MODE
> > + else if (err == 0)
> > + oprofile_arch_set_hwsampler(&oprofile_ops);
>
> I would like to see this in oprofile_arch_init().
>

OK, done

>
>
> > +#endif
> > return oprofilefs_register();
> > }
> >
> > Index: linux-2.6/drivers/oprofile/oprof.h
> > ===================================================================
> > --- linux-2.6.orig/drivers/oprofile/oprof.h
> > +++ linux-2.6/drivers/oprofile/oprof.h
> > @@ -35,7 +35,9 @@ struct dentry;
> >
> > void oprofile_create_files(struct super_block *sb, struct dentry *root);
> > int oprofile_timer_init(struct oprofile_operations *ops);
> > +int __oprofile_timer_init(struct oprofile_operations *ops);
> > void oprofile_timer_exit(void);
> > +void __oprofile_timer_exit(void);
>
> See my comments above, I don't want to export this.
>
> >
> > int oprofile_set_ulong(unsigned long *addr, unsigned long val);
> > int oprofile_set_timeout(unsigned long time);
> > Index: linux-2.6/drivers/oprofile/timer_int.c
> > ===================================================================
> > --- linux-2.6.orig/drivers/oprofile/timer_int.c
> > +++ linux-2.6/drivers/oprofile/timer_int.c
> > @@ -97,14 +97,13 @@ static struct notifier_block __refdata o
> > .notifier_call = oprofile_cpu_notify,
> > };
> >
> > -int __init oprofile_timer_init(struct oprofile_operations *ops)
> > +int __oprofile_timer_init(struct oprofile_operations *ops)
> > {
> > int rc;
> >
> > rc = register_hotcpu_notifier(&oprofile_cpu_notifier);
> > if (rc)
> > return rc;
> > - ops->create_files = NULL;
> > ops->setup = NULL;
> > ops->shutdown = NULL;
> > ops->start = oprofile_hrtimer_start;
> > @@ -113,7 +112,18 @@ int __init oprofile_timer_init(struct op
> > return 0;
> > }
> >
> > -void __exit oprofile_timer_exit(void)
> > +int __init oprofile_timer_init(struct oprofile_operations *ops)
> > +{
> > + return __oprofile_timer_init(ops);
> > +}
> > +
> > +void __oprofile_timer_exit(void)
> > {
> > unregister_hotcpu_notifier(&oprofile_cpu_notifier);
> > }
> > +
> > +void __exit oprofile_timer_exit(void)
> > +{
> > + __oprofile_timer_exit();
> > +}
> > +
> > Index: linux-2.6/include/linux/oprofile.h
> > ===================================================================
> > --- linux-2.6.orig/include/linux/oprofile.h
> > +++ linux-2.6/include/linux/oprofile.h
> > @@ -89,6 +89,21 @@ int oprofile_arch_init(struct oprofile_o
> > */
> > void oprofile_arch_exit(void);
> >
> > +#ifdef CONFIG_OPROFILE_HWSAMPLING_MODE
> > +/**
> > + * setup hardware sampler for oprofiling.
> > + */
> > +
> > +int oprofile_set_hwsampler(unsigned long);
> > +
> > +/**
> > + * hardware sampler module initialization for the s390 arch
> > + */
> > +
> > +int oprofile_arch_set_hwsampler(struct oprofile_operations *ops);
>
> This is not generic code, there is no other architecture that may
> reuse this. We should move this to arch/s390.
>

Hmm, we need it to be able to switch modes.

> > +
> > +#endif /* CONFIG_OPROFILE_HWSAMPLING_MODE */
> > +
> > /**
> > * Add a sample. This may be called from any context.
> > */
> > Index: linux-2.6/arch/s390/oprofile/init.c
> > ===================================================================
> > --- linux-2.6.orig/arch/s390/oprofile/init.c
> > +++ linux-2.6/arch/s390/oprofile/init.c
> > @@ -11,16 +11,51 @@
> > #include <linux/oprofile.h>
> > #include <linux/init.h>
> > #include <linux/errno.h>
> > +#include <linux/fs.h>
> >
> > +#ifdef CONFIG_OPROFILE_HWSAMPLING_MODE
> > +#include <asm/hwsampler.h>
> > +
> > +extern int oprofile_create_hwsampling_files(struct super_block *sb,
> > + struct dentry *root);
> > +
> > +extern unsigned long oprofile_min_interval;
> > +extern unsigned long oprofile_max_interval;
>
> This becomes static if we move it to arch/s390/oprofile/hwsampler.c
> (see below).

done

>
> > +#endif /* CONFIG_OPROFILE_HWSAMPLING_MODE */
> >
> > extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth);
> >
> > int __init oprofile_arch_init(struct oprofile_operations* ops)
> > {
> > ops->backtrace = s390_backtrace;
> > +
> > +#ifdef CONFIG_OPROFILE_HWSAMPLING_MODE
> > + if (hwsampler_setup())
> > + return -ENODEV;
> > +
> > + /*
> > + * create hwsampler files only if hwsampler_setup() succeeds.
> > + */
> > + ops->create_files = oprofile_create_hwsampling_files;
> > + oprofile_min_interval = hwsampler_query_min_interval();
> > + if (oprofile_min_interval < 0) {
> > + oprofile_min_interval = 0;
> > + return -ENODEV;
> > + }
> > + oprofile_max_interval = hwsampler_query_max_interval();
> > + if (oprofile_max_interval < 0) {
> > + oprofile_max_interval = 0;
> > + return -ENODEV;
> > + }
> > + return 0;
> > +#endif /* CONFIG_OPROFILE_HWSAMPLING_MODE */
>
> Move all the code for CONFIG_OPROFILE_HWSAMPLING_MODE in this file to
>
> arch/s390/oprofile/hwsampler.c
>
> and only export an oprofile_hwsampler_init() function. This can be an
> empty function stub for the !CONFIG_OPROFILE_HWSAMPLING_MODE case.
>

done

> > +
> > return -ENODEV;
> > }
> >
> > void oprofile_arch_exit(void)
> > {
> > +#ifdef CONFIG_OPROFILE_HWSAMPLING_MODE
> > + hwsampler_shutdown();
> > +#endif /* CONFIG_OPROFILE_HWSAMPLING_MODE */
>
> Same here...

done

>
> -Robert
>
> > }
> >
> >
>









\
 
 \ /
  Last update: 2011-01-19 18:15    [W:0.262 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site