lkml.org 
[lkml]   [2011]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: resume regression in 2.6.37
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 01/17/2011 01:40 PM, Thomas Gleixner wrote:
> On Mon, 17 Jan 2011, Sven Neumann wrote:
>
>> On Thu, 2011-01-13 at 18:33 +0100, Thomas Gleixner wrote:
>>
>>>> Without the revert there is absolutely no sign of resume. With the
>>>> change reverted I can see that the PXA powers up again, there's an LED
>>>> showing that the USB controller has power again. Unfortunately there's
>>>> seems to be another problem and the resume doesn't complete. I've tried
>>>> to get console output by using no_console_suspend, but there's just
>>>> gibberish on the console after resume :(
>>>>
>>>> Any idea on how to proceed from here? I could perhaps ask our hardware
>>>> engineer to try find out where exactly we are stuck in the resume. But
>>>> I'd like to avoid that if possible.
>>>
>>> Can you stick a printk into the set_wake() function of that irq chip
>>> and print the irq and on arguments and the return value . Run that
>>> with both stock 2.6.37 and the patch reverted.
>>
>> pxa3xx_set_wake(31, 1) returns 0
>>
>> Same result with stock 2.6.37 and the patch reverted. Except that
>> without the patch reverted, the device doesn't power up again.
>
> Ok, can we agree that the patch has no functional impact on the
> set_wake function? And I don't see a reason why reverting that patch
> results in a working resume. That does not make sense at all. Which
> compiler version are you using ?
>
> Thanks,
>
> tglx
>

Hi

If you take a look at the pxa gpio irq handling you'll see that it sets the
"set_wake" field of it's irq_chip after calling set_irq_chip for all of the irqs, so
the compat handler gets never installed.

So I guess the following patch fixes it:

diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
- --- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -111,13 +111,13 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn)
GRER0 &= ~0x3;
GEDR0 = 0x3;

+ pxa_low_gpio_chip.set_wake = fn;
+
for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
set_irq_chip(irq, &pxa_low_gpio_chip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID);
}
- -
- - pxa_low_gpio_chip.set_wake = fn;
}

void __init pxa_init_irq(int irq_nr, set_wake_t fn)
@@ -142,13 +142,14 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
/* only unmasked interrupts kick us out of idle */
ICCR = 1;

+ pxa_internal_irq_chip.set_wake = fn;
+
for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) {
set_irq_chip(irq, &pxa_internal_irq_chip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}

- - pxa_internal_irq_chip.set_wake = fn;
pxa_init_low_gpio_irq(fn);
}

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk00l4cACgkQBX4mSR26RiMTMQCdGCiu3ALAIEe0dUkX3u5xeHmz
dggAnj2cePanr6HFi+6KQ4tF7cT6xoq0
=yxJs
-----END PGP SIGNATURE-----

\
 
 \ /
  Last update: 2011-01-17 20:27    [W:0.068 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site