lkml.org 
[lkml]   [2011]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/3] perf: add OMAP support for the new power events
Date
On Wednesday 05 January 2011 12:05:18 Jean Pihet wrote:
> Hi Paul,
>
> On Tue, Jan 4, 2011 at 7:48 PM, Paul Walmsley <paul@pwsan.com> wrote:
> > Hello Jean,
> >
> > On Tue, 4 Jan 2011, jean.pihet@newoldbits.com wrote:
> >
> >> From: Jean Pihet <j-pihet@ti.com>
> >>
> >> The patch adds the new power management trace points for
> >> the OMAP architecture.
> >>
> >> The trace points are for:
> >> - default idle handler. Since the cpuidle framework is
> >> instrumented in the generic way there is no need to
> >> add trace points in the OMAP specific cpuidle handler;
> >> - cpufreq (DVFS),
> >> - clocks changes (enable, disable, set_rate),
> >
> > A question about these. Are these only meant to track calls to these
> > functions from outside the clock code? Or meant to track actual hardware
> > clock changes?
> The former: this is used to track the clock requests from outside the
> clock framework.
>
> > If the latter, then it might make sense to put these
> > trace points into the functions that actually change the hardware
> > registers, e.g., omap2_dflt_clk_{enable,disable}(), etc., since a
> > clk_enable() on a leaf clock may result in many internal system clocks
> > being enabled up the clock tree.
> I agree with you it is better to track the actual clock changes instead.
> I propose to move the tracepoints to omap2_clk_{enable...} which
> enables all the clocks irrespectively of the installed handler.
> Note about the clock handlers: omap2_dflt_clk_enable happens to be the
> handler for all controllable clocks but could that change in the
> future?
Looks like there is cpuidle34xx using cpuidle framework on specific boards
only.
And pm34xx.c and others override pm_idle and use the same low level
functions to reduce power consumption as cpuidle34xx.
Ideally pm34xx.c (and others) would not override pm_idle, but register as
a cpuidle driver. Then the idle events would be tracked by the
cpuidle subsystem automatically (with my latest patches).
But this would be a more intrusive change (are there efforts to do that?).
Even if it should happen at some point, adding some additional events for
people to better debug/monitor the stuff now does not hurt.

Thomas


\
 
 \ /
  Last update: 2011-01-10 15:17    [W:0.091 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site