lkml.org 
[lkml]   [2010]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] ARM: pxa168: added support for Teton BGA platform
Date
Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
---
arch/arm/mach-mmp/Kconfig | 7 ++++++
arch/arm/mach-mmp/Makefile | 1 +
arch/arm/mach-mmp/teton_bga.c | 47 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 55 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mmp/teton_bga.c

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 6ab843e..0711d3b 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -57,6 +57,13 @@ config MACH_MARVELL_JASPER
PXA910-based development board. Since MMP2 is compatible to
ARMv6 architecture.

+config MACH_TETON_BGA
+ bool "Marvell's PXA168 Teton BGA Development Board"
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support the Marvell PXA168-based
+ Teton BGA Development Board.
+
endmenu

config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 8b66d06..751cdbf 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
new file mode 100644
index 0000000..014cc37
--- /dev/null
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/arm/mach-mmp/teton_bga.c
+ *
+ * Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ * This code is based on aspenite.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long teton_bga_pin_config[] __initdata = {
+ /* UART1 */
+ GPIO107_UART1_TXD,
+ GPIO108_UART1_RXD,
+};
+
+static void __init teton_bga_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
+
+ /* on-chip devices */
+ pxa168_add_uart(1);
+}
+
+MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
+ .phys_io = APB_PHYS_BASE,
+ .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
+ .map_io = mmp_map_io,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = teton_bga_init,
+MACHINE_END
--
1.7.0.4


\
 
 \ /
  Last update: 2010-09-08 04:59    [W:0.087 / U:0.096 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site