lkml.org 
[lkml]   [2010]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] USB: otg: twl4030: fix phy initialization(v1)
From
thanks for your good response.

Venkii,

On Tue, Sep 7, 2010 at 6:54 PM, Ming Lei <tom.leiming@gmail.com> wrote:
> 2010/9/7 venki kaps <venkiece2005@gmail.com>:
>> Dear USB experts,
>>
>>  Is the same fix valid for omap3430 + 2.6.32 Kernel?
>>
>>  I have been facing mp3 playback idle current consumption 20mA more
>> after booting without USB cable connected
>>  but If USB cable detach and attach happen, then able to hit proper
>> values otherwise irrespective of cold/warm reset
>>  the current values increases to 20mA.
>>
>>  with cable,
>>      OTG_SYSCONFIG standby mode of operation - SMART idle
>>      HSOTGUSB_STANDBY - SMART standby
>>
>>  without cable,
>>        OTG_SYSCONFIG standby mode of operation - SMART idle
>>        HSOTGUSB_STANDBY - Active
>>
>>  Even i have applied  patch but still the same issue.
>
> Are you applying the patch below?
>
>         http://marc.info/?l=linux-omap&m=128378686221264&w=2
>
> The patch(USB: otg: twl4030: fix phy initialization(v1)) above is against
> 2.6.36-rc3, I don't think you can apply it directly on 2.6.32. And the patch
> is introduced to fix the problems caused by
>
>          commit 461c317705eca5cac09a360f488715927fd0a927.
>
> which change is committed into mainline 2.6.36-rc3.
>>> Yes, this patch i have applied.

>>
>>  If i use __twl4030_phy_power(twl, 0) at the end of USB LDO initialization,
>
> If you apply this patch against 2.6.36-rc3, you will find
> __twl4030_phy_power(twl, 0)  is always called from .probe
> if you don't connect musb with PC via cable when powering on.
>
>>  then able to hit proper values but USB ADC values are getting in correct
>>  with Travel adapter (Charger power supply) which means temperature
>>  shows 84 instead of 26~30 degrees.
>>
>>  Queries,
>>  -----------
>>   - Is Errata 1.164 fix : OTG idle will work on 3430?
>
> No such errata found in ti wetsite, could you give a link?
In Zoom3 git,pm34xx.c file
/*
* Errata 1.164 fix : OTG autoidle can prevent
* sleep. enable/disable iclk over OFF.
*/
cm_rmw_mod_reg_bits(OMAP3430_EN_HSOTGUSB, 0x0,
CORE_MOD, CM_ICLKEN1);

>
>>   - USBOTG_SUSPEND is enabled in Kernel 32, will it give any impact?
>
> Kernel does not have USBOTG_SUSPEND config option. Do you
> mean USB_SUSPEND? If so, it is nothing to do with your issue since
> it is only valid for host driver. Also for your case, musb works at
> b-idle state.
>
Yes,CONFIG_USB_SUSPEND.

>>   - Is there anything missed from Power management idle path (or)
>>    USB OTG controller/Transreceiver driver part?
>
> Maybe with transreceiver part, musb doesn't support runtime pm now.
>
>>
>>  Could you please provide the best approach to solve my issue?
>
> Sorry, this patch is not for your issue, as said above.
>
>
> --
> Lei Ming
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-09-07 15:53    [W:0.207 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site