lkml.org 
[lkml]   [2010]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] Input: Make ADS7846 independent on regulator
 Seems that there are some more platforms then Sharp Zaurus
are interested in this patch.

Dmitry, Mike, Pavel,

What's the status of it?

On 07/31/10 10:09, Marek Vasut wrote:
> In case regulator was not found, ADS7846 failed to probe.
>
> This fixes a problem on some Sharp Zaurus devices, where there is no regulator
> present and the touchscreen is used.
>
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
> drivers/input/touchscreen/ads7846.c | 38 +++++++++++++++++++---------------
> 1 files changed, 21 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
> index a9fdf55..53b318b 100644
> --- a/drivers/input/touchscreen/ads7846.c
> +++ b/drivers/input/touchscreen/ads7846.c
> @@ -791,7 +791,8 @@ static void ads7846_disable(struct ads7846 *ts)
> }
> }
>
> - regulator_disable(ts->reg);
> + if (ts->reg)
> + regulator_disable(ts->reg);
>
> /* we know the chip's in lowpower mode since we always
> * leave it that way after every request
> @@ -804,7 +805,8 @@ static void ads7846_enable(struct ads7846 *ts)
> if (!ts->disabled)
> return;
>
> - regulator_enable(ts->reg);
> + if (ts->reg)
> + regulator_enable(ts->reg);
>
> ts->disabled = 0;
> ts->irq_disabled = 0;
> @@ -1162,16 +1164,15 @@ static int __devinit ads7846_probe(struct spi_device *spi)
> ts->last_msg = m;
>
> ts->reg = regulator_get(&spi->dev, "vcc");
> - if (IS_ERR(ts->reg)) {
> - err = PTR_ERR(ts->reg);
> - dev_err(&spi->dev, "unable to get regulator: %d\n", err);
> - goto err_free_gpio;
> - }
> -
> - err = regulator_enable(ts->reg);
> - if (err) {
> - dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
> - goto err_put_regulator;
> + if (IS_ERR(ts->reg))
> + ts->reg = NULL;
> + else {
> + err = regulator_enable(ts->reg);
> + if (err) {
> + dev_err(&spi->dev, "unable to enable regulator: %d\n",
> + err);
> + goto err_put_regulator;
> + }
> }
>
> if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
> @@ -1218,10 +1219,11 @@ static int __devinit ads7846_probe(struct spi_device *spi)
> err_free_irq:
> free_irq(spi->irq, ts);
> err_disable_regulator:
> - regulator_disable(ts->reg);
> + if (ts->reg)
> + regulator_disable(ts->reg);
> err_put_regulator:
> - regulator_put(ts->reg);
> - err_free_gpio:
> + if (ts->reg)
> + regulator_put(ts->reg);
> if (ts->gpio_pendown != -1)
> gpio_free(ts->gpio_pendown);
> err_cleanup_filter:
> @@ -1251,8 +1253,10 @@ static int __devexit ads7846_remove(struct spi_device *spi)
> /* suspend left the IRQ disabled */
> enable_irq(ts->spi->irq);
>
> - regulator_disable(ts->reg);
> - regulator_put(ts->reg);
> + if (ts->reg) {
> + regulator_disable(ts->reg);
> + regulator_put(ts->reg);
> + }
>
> if (ts->gpio_pendown != -1)
> gpio_free(ts->gpio_pendown);

--
Regards,
Igor.



\
 
 \ /
  Last update: 2010-09-07 14:25    [W:0.203 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site