lkml.org 
[lkml]   [2010]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [TuxOnIce-devel] Nigel's current for-rafael queue
Date
Am Samstag 25 September 2010 schrieb Nigel Cunningham:
> Hi Rafael.
>
> Please find attached a slightly updated version of the patchset I sent
> a few months ago. The main change is that I've prepended and additional
> patch which lets the user see the speed at which the image is being
> read and written. This is accomplished by recording the MB/s in a
> single byte in the image header, and using a couple of __nosavedata
> variables to get the data back through the atomic restore. I realise
> the char limits us to 255MB/s at the moment. In future patches, I
> intend to address this by storing the data in a 'proper' image header
> (it's a real problem - TuxOnIce reads and writes on the same set up at
> speeds around 250MB/s).
>
> Results on my Dell XPS M1530, which has an SSD hard drive are:
>
> With just patch 1 applied:
> Attempt 1: Write 74MB/s; Read 52MB/s
> Attempt 2: Write 68MB/s; Read 52MB/s
> Attempt 3: Write 73MB/s; Read 53MB/s
>
> With the whole sequence:
> Attempt 1: Write 181MB/s; Read 52MB/s
> Attempt 2: Write 156MB/s; Read 53MB/s
> Attempt 3: Write 160MB/s; Read 52MB/s

Is doesn't get much stabler than

shambhala:~> grep "PM: Image.*at " /var/log/syslog
Sep 28 11:32:06 shambhala kernel: PM: Image written at 63 MB/s.
Sep 28 11:32:06 shambhala kernel: PM: Image read at 32 MB/s.
Sep 28 11:35:00 shambhala kernel: PM: Image written at 65 MB/s.
Sep 28 11:35:00 shambhala kernel: PM: Image read at 32 MB/s.
Sep 28 11:38:43 shambhala kernel: PM: Image written at 65 MB/s.
Sep 28 11:38:43 shambhala kernel: PM: Image read at 33 MB/s.
Sep 28 11:41:15 shambhala kernel: PM: Image written at 66 MB/s.
Sep 28 11:41:15 shambhala kernel: PM: Image read at 33 MB/s.
Sep 28 11:42:57 shambhala kernel: PM: Image written at 66 MB/s.
Sep 28 11:42:57 shambhala kernel: PM: Image read at 34 MB/s.
Sep 28 11:45:16 shambhala kernel: PM: Image written at 66 MB/s.
Sep 28 11:45:16 shambhala kernel: PM: Image read at 34 MB/s.
Sep 28 12:19:21 shambhala kernel: PM: Image written at 66 MB/s.
Sep 28 12:19:21 shambhala kernel: PM: Image read at 35 MB/s.
Sep 28 12:21:35 shambhala kernel: PM: Image written at 65 MB/s.
Sep 28 12:21:35 shambhala kernel: PM: Image read at 35 MB/s.
Sep 28 12:23:18 shambhala kernel: PM: Image written at 65 MB/s.
Sep 28 12:23:18 shambhala kernel: PM: Image read at 35 MB/s.
Sep 28 12:25:23 shambhala kernel: PM: Image written at 64 MB/s.
Sep 28 12:25:23 shambhala kernel: PM: Image read at 36 MB/s.
Sep 28 12:26:55 shambhala kernel: PM: Image written at 65 MB/s.
Sep 28 12:26:55 shambhala kernel: PM: Image read at 37 MB/s.
Sep 28 12:28:28 shambhala kernel: PM: Image written at 65 MB/s.
Sep 28 12:28:28 shambhala kernel: PM: Image read at 37 MB/s.

many attempts.

So - without readahead patch for now -

Tested-By: Martin Steigerwald <Martin@Lichtvoll.de>

on 2.6.36-rc5.

Thanks,
--
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2010-09-28 12:39    [W:0.190 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site