Messages in this thread | | | Date | Thu, 23 Sep 2010 11:51:23 -0700 | From | Randy Dunlap <> | Subject | Re: [PATCH 0/1] Adding support for STA2x11/ConneXt PCIexpress function 0xCC0C. |
| |
On Thu, 23 Sep 2010 20:25:31 +0200 Anders Wallin wrote:
> From: Anders Wallin <anders.wallin@windriver.com> > > This function enable access to multiple IP-blocks including 4 GPIO blocks, > one System Control block and one Timer block. Access to the PCIe device is managed by a MUX driver. > The pl061_pci gpio driver is based on the ARM pl061 IP block, but the functionality is not a one to one map. The gpio driver needs the generic "gpio_to_irq" support.
This patch description should be in patch 1/1. The diffstat can go there also. No need to patch 0/1 email at all.
Thanks.
> Anders Wallin (1): > Adding support for STA2x11/Connext PCIexpress function 0xCC0C. > > arch/x86/include/asm/gpio.h | 2 +- > drivers/gpio/Kconfig | 14 + > drivers/gpio/Makefile | 1 + > drivers/gpio/pl061_pci.c | 860 +++++++++++++++++++++++++++++++++++++++++ > drivers/gpio/pl061_pci.h | 29 ++ > drivers/misc/Kconfig | 23 ++ > drivers/misc/Makefile | 3 + > drivers/misc/sta2x11_apbreg.c | 177 +++++++++ > drivers/misc/sta2x11_apbreg.h | 39 ++ > drivers/misc/sta2x11_mux.c | 265 +++++++++++++ > drivers/misc/sta2x11_mux.h | 50 +++ > drivers/misc/sta2x11_sctl.c | 189 +++++++++ > drivers/misc/sta2x11_sctl.h | 143 +++++++ > 13 files changed, 1794 insertions(+), 1 deletions(-) > create mode 100644 drivers/gpio/pl061_pci.c > create mode 100644 drivers/gpio/pl061_pci.h > create mode 100644 drivers/misc/sta2x11_apbreg.c > create mode 100644 drivers/misc/sta2x11_apbreg.h > create mode 100644 drivers/misc/sta2x11_mux.c > create mode 100644 drivers/misc/sta2x11_mux.h > create mode 100644 drivers/misc/sta2x11_sctl.c > create mode 100644 drivers/misc/sta2x11_sctl.h
--- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code ***
| |