lkml.org 
[lkml]   [2010]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2 v2] msm: Install the Google-Android gpio driver.
On Wed, Sep 01, 2010 at 04:39:39PM -0700, Gregory Bean wrote:
> As part of the ongoing effort to converge on a common code base,
> adopt the Google-Android msmgpio driver, as it has a stronger pedigree
> than the previous submission from codeaurora.
> Based on work by folks at Google, including Brian Swetland and Arve Hjønnevåg.
>
> Cc: Arve Hjønnevåg <arve@android.com>
> Signed-off-by: Gregory Bean <gbean@codeaurora.org>
> ---
> arch/arm/mach-msm/Makefile | 3 +
> arch/arm/mach-msm/gpio.c | 479 +++++++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-msm/gpio_hw.h | 278 +++++++++++++++++++++++++
> 3 files changed, 760 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-msm/gpio.c
> create mode 100644 arch/arm/mach-msm/gpio_hw.h
>
> diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
> index 2263b8f..c95d19a 100644
> --- a/arch/arm/mach-msm/Makefile
> +++ b/arch/arm/mach-msm/Makefile
> @@ -22,3 +22,6 @@ obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
> obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o
> obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
> obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
> +ifndef CONFIG_MSM_V2_TLMM
> +obj-y += gpio.o
> +endif
> diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c
> new file mode 100644
> index 0000000..89c857b
> --- /dev/null
> +++ b/arch/arm/mach-msm/gpio.c
> @@ -0,0 +1,479 @@
> +/* linux/arch/arm/mach-msm/gpio.c
> + *
> + * Copyright (C) 2007 Google, Inc.
> + * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/gpio.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include "gpio_hw.h"
> +#include "proc_comm.h"
> +#include "smd_private.h"
> +
> +#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0)
> +
> +#define MSM_GPIO_BANK(bank, first, last) \
> + { \
> + .regs = { \
> + .out = MSM_GPIO_OUT_##bank, \
> + .in = MSM_GPIO_IN_##bank, \
> + .int_status = MSM_GPIO_INT_STATUS_##bank, \
> + .int_clear = MSM_GPIO_INT_CLEAR_##bank, \
> + .int_en = MSM_GPIO_INT_EN_##bank, \
> + .int_edge = MSM_GPIO_INT_EDGE_##bank, \
> + .int_pos = MSM_GPIO_INT_POS_##bank, \
> + .oe = MSM_GPIO_OE_##bank, \
> + }, \
> + .chip = { \
> + .base = (first), \
> + .ngpio = (last) - (first) + 1, \
> + .get = msm_gpio_get, \
> + .set = msm_gpio_set, \
> + .direction_input = msm_gpio_direction_input, \
> + .direction_output = msm_gpio_direction_output, \
> + .to_irq = msm_gpio_to_irq, \

if you're stuffing things like this into macros, maybe you should just
set them at initialisation time, it will make the macro smaller.

[snip]

> +static int msm_gpio_write(struct msm_gpio_chip *msm_chip,
> + unsigned offset, unsigned on)
> +{
> + unsigned b = 1U << offset;
> + unsigned v;

how about making these a bit more descrptive? change b for bit, and v
for val?

> diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h
> new file mode 100644
> index 0000000..6b50660
> --- /dev/null
> +++ b/arch/arm/mach-msm/gpio_hw.h
> @@ -0,0 +1,278 @@
> +/* arch/arm/mach-msm/gpio_hw.h
> + *
> + * Copyright (C) 2007 Google, Inc.
> + * Author: Brian Swetland <swetland@google.com>
> + * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H
> +#define __ARCH_ARM_MACH_MSM_GPIO_HW_H
> +
> +#include <mach/msm_iomap.h>
> +
> +/* see 80-VA736-2 Rev C pp 695-751
> +**
> +** These are actually the *shadow* gpio registers, since the
> +** real ones (which allow full access) are only available to the
> +** ARM9 side of the world.
> +**
> +** Since the _BASE need to be page-aligned when we're mapping them
> +** to virtual addresses, adjust for the additional offset in these
> +** macros.
> +*/
> +
> +#if defined(CONFIG_ARCH_MSM7X30)
> +#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off))
> +#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off))
> +#else
> +#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
> +#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
> +#endif
> +
> +#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\
> + defined(CONFIG_ARCH_MSM7X27)
> +
> +/* output value */
> +#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */
> +#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */
> +#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */
> +#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */
> +#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */
> +#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 107-121 */
> +
> +/* same pin map as above, output enable */
> +#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10)
> +#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08)
> +#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14)
> +#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18)
> +#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C)
> +#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54)

do we need each and every register defined in the header? would simply
the base of each gpio bank make this header file much smaller? or
turn it into MSM_GPIO_OE(x) ?

> +#if defined(CONFIG_ARCH_QSD8X50)

this sort of #ifdef makes me want to punch people repeatedly until they
do a better job of designing these things in the first place. It makes
it so hard to get multiple different SoCs compiling into the kernel.

--
Ben

Q: What's a light-year?
A: One-third less calories than a regular year.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-09-02 12:31    [W:0.256 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site