lkml.org 
[lkml]   [2010]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectPROBLEM: Kernel panic on 2.6.36-rc4 when loading intel_ips on Core i3 laptop
Hi,

I'm getting a kernel panic when I try to load the new Intel IPS
powersaving code (intel_ips). It happens about 5 seconds after it gets
loaded.

It occurs on an Acer 1830T which has a Core i3-330UM CPU. It panics when
using SMP. With maxcpus=1 it does not panic but gives a general
protection fault. It seems to me that it's trying to disable turbo mode
which AFAIK does not exist on this cpu.

Here's the interesting bit when loading intel_ips with maxcpus=1:

[ 49.646988] intel ips 0000:00:1f.6: Warning: CPU TDP doesn't match
expected value (found 11, expected 18)
[ 49.647227] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 49.647637] intel ips 0000:00:1f.6: failed to get i915 symbols,
graphics turbo disabled
[ 49.647920] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp
limit 65535
[ 54.843465] general protection fault: 0000 [#1] PREEMPT SMP
[ 54.843809] last sysfs file: /sys/bus/pci/drivers/intel ips/uevent
[ 54.843946] CPU 0
[ 54.844020] Modules linked in: intel_ips nfsd exportfs nfs lockd
fscache auth_rpcgss sunrpc ipv6 fuse loop uvcvideo videodev option arc4
snd_hda_codec_intelhdmi v4l1_compat v4l2_compat_ioctl32 usb_wwan
snd_hda_codec_realtek ecb usb_storage snd_hda_intel snd_hda_codec iwlagn
usbserial snd_hwdep snd_pcm_oss snd_mixer_oss iwlcore mac80211 snd_pcm
snd_timer cfg80211 ehci_hcd intel_agp psmouse snd processor acer_wmi
video usbcore rfkill soundcore agpgart i2c_i801 backlight serio_raw
i2c_core led_class output ac thermal wmi button battery thermal_sys
evdev snd_page_alloc pcspkr nls_base
[ 54.848814]
[ 54.848932] Pid: 1185, comm: ips-adjust Not tainted 2.6.36-rc4 #4
Base Board Product Name/Aspire 1830T
[ 54.849124] RIP: 0010:[<ffffffffa00290e9>] [<ffffffffa00290e9>]
do_disable_cpu_turbo+0x29/0x30 [intel_ips]
[ 54.849389] RSP: 0018:ffff880134525e78 EFLAGS: 00010002
[ 54.849521] RAX: 0000000100000009 RBX: ffffffffa00290c0 RCX:
0000000000000199
[ 54.849643] RDX: 0000000000000001 RSI: 0000000000000008 RDI:
ffff880135d109c0
[ 54.849765] RBP: ffff880135d109c0 R08: ffffffff81655120 R09:
0000000000000000
[ 54.849887] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 54.850008] R13: 0000000080000000 R14: 00000000000000f9 R15:
00000000000001ac
[ 54.850131] FS: 0000000000000000(0000) GS:ffff880001800000(0000)
knlGS:0000000000000000
[ 54.850302] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 54.850418] CR2: 0000000001265008 CR3: 0000000136864000 CR4:
00000000000006f0
[ 54.850540] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 54.850662] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 54.850783] Process ips-adjust (pid: 1185, threadinfo
ffff880134524000, task ffff880134de3e90)
[ 54.850954] Stack:
[ 54.851056] ffffffff8104538c ffff880135d109c0 ffff880135d10a00
0000000000000000
[ 54.851328] <0> ffffffffa00296ca ffff880134525f00 ffff880135d109c0
ffffffffa0029410
[ 54.851745] <0> ffff880134547c98 ffff880134525f00 ffff880135d109c0
ffffffffa0029410
[ 54.852251] Call Trace:
[ 54.852361] [<ffffffff8104538c>] ? on_each_cpu+0x3c/0x80
[ 54.852480] [<ffffffffa00296ca>] ? ips_adjust+0x2ba/0x3f0 [intel_ips]
[ 54.852603] [<ffffffffa0029410>] ? ips_adjust+0x0/0x3f0 [intel_ips]
[ 54.853450] [<ffffffffa0029410>] ? ips_adjust+0x0/0x3f0 [intel_ips]
[ 54.853574] [<ffffffff8105a846>] ? kthread+0x96/0xa0
[ 54.853693] [<ffffffff81003b94>] ? kernel_thread_helper+0x4/0x10
[ 54.853815] [<ffffffff8105a7b0>] ? kthread+0x0/0xa0
[ 54.853931] [<ffffffff81003b90>] ? kernel_thread_helper+0x0/0x10
[ 54.854048] Code: 00 00 b9 99 01 00 00 0f 32 48 c1 e2 20 89 c0 48 09
c2 48 b8 00 00 00 00 01 00 00 00 48 85 c2 75 0c 48 09 d0 48 89 c2 48 c1
ea 20 <0f> 30 f3 c3 0f 1f 00 0f b7 c6 66 d1 ef 6b c0 64 d1 f8 8d 04 07
[ 54.857483] RIP [<ffffffffa00290e9>] do_disable_cpu_turbo+0x29/0x30
[intel_ips]
[ 54.857702] RSP <ffff880134525e78>
[ 54.857812] ---[ end trace 4c3f4f3e72ed300e ]---
[ 54.857925] note: ips-adjust[1185] exited with preempt_count 1


Please advise on how to debug this issue, I'm happy to test things.

Thanks!



Wall of text with kernel logs and hardware info follows:

SMP Panic dmesg:
[ 0.000000] #50 [00019c0000 - 00019db000] BOOTMEM
[ 0.000000] #51 [00017a9440 - 00017a9448] BOOTMEM
[ 0.000000] #52 [00017a9480 - 00017a9488] BOOTMEM
[ 0.000000] #53 [00017a94c0 - 00017a94e0] BOOTMEM
[ 0.000000] #54 [00017a9500 - 00017a9540] BOOTMEM
[ 0.000000] #55 [00017a9540 - 00017a9660] BOOTMEM
[ 0.000000] #56 [00017a9680 - 00017a96c8] BOOTMEM
[ 0.000000] #57 [00017a9700 - 00017a9748] BOOTMEM
[ 0.000000] #58 [00017ab000 - 00017b3000] BOOTMEM
[ 0.000000] #59 [00019db000 - 0001ddb000] BOOTMEM
[ 0.000000] #60 [0005800000 - 0005a00000] BOOTMEM
[ 0.000000] #61 [0005a00000 - 0009a00000] BOOTMEM
[ 0.000000] #62 [00017b3000 - 00017d3000] BOOTMEM
[ 0.000000] #63 [0001ddb000 - 0001e1b000] BOOTMEM
[ 0.000000] #64 [000000c000 - 0000014000] BOOTMEM
[ 0.000000] Memory: 3718004k/5111808k available (3459k kernel code,
1255568k absent, 138236k reserved, 3037k data, 404k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1196.964 MHz processor.
[ 0.000007] Calibrating delay loop (skipped), value calculated using
timer frequency.. 2393.92 BogoMIPS (lpj=4787856)
[ 0.000230] pid_max: default: 32768 minimum: 301
[ 0.000368] Mount-cache hash table entries: 256
[ 0.000622] CPU: Physical Processor ID: 0
[ 0.000729] CPU: Processor Core ID: 0
[ 0.000839] mce: CPU supports 9 MCE banks
[ 0.000958] CPU0: Thermal monitoring enabled (TM1)
[ 0.001075] using mwait in idle threads.
[ 0.001182] Performance Events: PEBS fmt1+, Westmere events, Intel
PMU driver.
[ 0.001489] ... version: 3
[ 0.001596] ... bit width: 48
[ 0.001702] ... generic registers: 4
[ 0.001808] ... value mask: 0000ffffffffffff
[ 0.001921] ... max period: 000000007fffffff
[ 0.002031] ... fixed-purpose events: 3
[ 0.002138] ... event mask: 000000070000000f
[ 0.002347] ACPI: Core revision 20100702
[ 0.054448] Setting APIC routing to flat
[ 0.054978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.094755] CPU0: Intel(R) Core(TM) i3 CPU U 330 @ 1.20GHz
stepping 05
[ 0.207371] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.219130] Booting Node 0, Processors #1
[ 0.327174] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.335080] #2
[ 0.443152] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.451007] #3
[ 0.559078] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.562914] Brought up 4 CPUs
[ 0.563032] Total of 4 processors activated (9575.79 BogoMIPS).
[ 0.564841] devtmpfs: initialized
[ 0.567307] NET: Registered protocol family 16
[ 0.567509] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.567674] ACPI: bus type pci registered
[ 0.567896] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.568069] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.640708] PCI: Using configuration type 1 for base access
[ 0.641563] bio: create slab <bio-0> at 0
[ 0.651986] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.662611] ACPI: BIOS _OSI(Linux) query ignored
[ 0.664108] ACPI: SSDT 00000000b3691c18 00264 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.665588] ACPI: Dynamic OEM Table Load:
[ 0.665787] ACPI: SSDT (null) 00264 (v01 PmRef Cpu0Ist 00003000
INTL 20051117)
[ 0.666691] ACPI: SSDT 00000000b368f018 00891 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.668149] ACPI: Dynamic OEM Table Load:
[ 0.668349] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001
INTL 20051117)
[ 0.669364] ACPI: SSDT 00000000b3690a98 00303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.670938] ACPI: Dynamic OEM Table Load:
[ 0.671140] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000
INTL 20051117)
[ 0.671693] ACPI: SSDT 00000000b368ed98 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.673239] ACPI: Dynamic OEM Table Load:
[ 0.673438] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000
INTL 20051117)
[ 0.710332] ACPI: Interpreter enabled
[ 0.710441] ACPI: (supports S0 S3 S4 S5)
[ 0.710797] ACPI: Using IOAPIC for interrupt routing
[ 0.728571] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.729182] ACPI: No dock devices found.
[ 0.729290] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.730577] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.732627] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.732746] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.732865] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.733033] pci_root PNP0A08:00: host bridge window [mem
0xc0000000-0xfeafffff]
[ 0.741698] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.742849] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.743098] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive
decode)
[ 0.751818] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.752632] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12
14 15)
[ 0.753399] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.754254] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.755174] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12
14 15)
[ 0.755936] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.756839] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.757691] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.758550] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.759333] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.759512] vgaarb: loaded
[ 0.759695] SCSI subsystem initialized
[ 0.759883] PCI: Using ACPI for IRQ routing
[ 0.760289] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.760823] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.762964] Switching to clocksource tsc
[ 0.763121] pnp: PnP ACPI init
[ 0.763240] ACPI: bus type pnp registered
[ 0.764920] pnp 00:05: disabling [io 0x164e-0x164f] because it
overlaps 0000:00:1c.1 BAR 7 [io 0x1000-0x1fff]
[ 0.766467] pnp: PnP ACPI: found 11 devices
[ 0.766577] ACPI: ACPI bus type pnp unregistered
[ 0.766698] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.766820] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.766936] system 00:05: [io 0xffff] has been reserved
[ 0.767048] system 00:05: [io 0xffff] has been reserved
[ 0.767161] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.767275] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.767397] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.767513] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.767631] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.767749] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.767867] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.767983] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.768099] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.768216] system 00:09: [mem 0xff000000-0xffffffff] could not be
reserved
[ 0.768335] system 00:09: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.768454] system 00:09: [mem 0xd4500000-0xd4500fff] has been reserved
[ 0.775197] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.775311] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.775433] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.775555] pci 0000:00:1c.0: bridge window [mem
0xd0400000-0xd13fffff 64bit pref]
[ 0.775730] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.775842] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.775963] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
[ 0.776086] pci 0000:00:1c.1: bridge window [mem
0xd1400000-0xd23fffff 64bit pref]
[ 0.776260] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.776371] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.776490] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.776606] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.776745] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.776885] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.777113] NET: Registered protocol family 2
[ 0.777310] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.777979] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.779508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.779934] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.780051] TCP reno registered
[ 0.780158] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.780297] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.780569] NET: Registered protocol family 1
[ 0.810894] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.811013] Placing 64MB software IO TLB between ffff880005a00000 -
ffff880009a00000
[ 0.811177] software IO TLB at phys 0x5a00000 - 0x9a00000
[ 0.811336] Simple Boot Flag at 0x44 set to 0x1
[ 0.812304] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.814227] VFS: Disk quotas dquot_6.5.2
[ 0.814417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.815075] msgmni has been set to 7261
[ 0.815460] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.815627] io scheduler noop registered
[ 0.815734] io scheduler deadline registered
[ 0.815889] io scheduler cfq registered (default)
[ 0.816945] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.817582] SCSI Media Changer driver v0.25
[ 0.817751] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.818015] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps
0x1 impl SATA mode
[ 0.818185] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo
pio slum part ems apst
[ 0.819221] scsi0 : ahci
[ 0.819428] scsi1 : ahci
[ 0.819604] scsi2 : ahci
[ 0.819780] scsi3 : ahci
[ 0.819940] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port
0xd4405100 irq 40
[ 0.820105] ata2: DUMMY
[ 0.820206] ata3: DUMMY
[ 0.820306] ata4: DUMMY
[ 0.820487] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.947388] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 0.947521] netconsole: local port 4444
[ 0.947629] netconsole: local IP 192.168.0.63
[ 0.947737] netconsole: interface 'eth0'
[ 0.947843] netconsole: remote port 9353
[ 0.947950] netconsole: remote IP 192.168.0.3
[ 0.948059] netconsole: remote ethernet address 00:15:17:21:1f:02
[ 0.948174] netconsole: device eth0 not up yet, forcing it
[ 1.138751] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.140799] ata1.00: ATA-8: WDC WD5000BEVT-00ZAT0, 01.01A01, max UDMA/133
[ 1.140931] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32), AA
[ 1.143674] ata1.00: configured for UDMA/133
[ 1.158758] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-0
01.0 PQ: 0 ANSI: 5
[ 1.159118] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.159148] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.159241] sd 0:0:0:0: [sda] Write Protect is off
[ 1.159283] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.210761] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.211375] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.620229] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps
Full Duplex>
[ 3.667258] console [netcon0] enabled
[ 3.667368] netconsole: network logging started
[ 3.667571] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 3.684896] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.685018] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.685227] mice: PS/2 mouse device common for all mice
[ 3.685408] rtc_cmos 00:06: RTC can wake from S4
[ 3.685579] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.685733] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.686016] cpuidle: using governor ladder
[ 3.686371] cpuidle: using governor menu
[ 3.686483] No iBFT detected.
[ 3.686992] TCP cubic registered
[ 3.687103] NET: Registered protocol family 17
[ 3.687222] Registering the dns_resolver key type
[ 3.688134] rtc_cmos 00:06: setting system clock to 2010-09-15
16:20:47 UTC (1284567647)
[ 3.711655] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 3.720108] EXT3-fs (sda6): error: couldn't mount because of
unsupported optional features (240)
[ 3.824528] EXT4-fs (sda6): mounted filesystem with writeback data
mode. Opts: data=writeback
[ 3.825017] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
[ 3.825207] Freeing unused kernel memory: 404k freed
[ 3.825485] Write protecting the kernel read-only data: 6144k
[ 3.826188] Freeing unused kernel memory: 620k freed
[ 3.826948] Freeing unused kernel memory: 944k freed
[ 5.390836] udevd (102): /proc/102/oom_adj is deprecated, please use
/proc/102/oom_score_adj instead.
[ 5.592768] Linux agpgart interface v0.103
[ 5.759951] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 5.760175] ACPI: Sleep Button [SLPB]
[ 5.760458] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 5.763169] ACPI: Lid Switch [LID0]
[ 5.763491] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.763698] ACPI: Power Button [PWRF]
[ 5.779601] ACPI: WMI: Skipping duplicate GUID
05901221-D566-11D1-B2F0-00A0C9062910
[ 5.781743] ACPI: WMI: Mapper loaded
[ 5.869268] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.914409] ACPI: Battery Slot [BAT0] (battery present)
[ 5.918966] ACPI: AC Adapter [ADP1] (on-line)
[ 6.130829] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low)
-> IRQ 19
[ 6.131059] ACPI: resource 0000:00:1f.3 [io 0x3000-0x301f] conflicts
with ACPI region SMBI [io 0x3000-0x300f window disabled]
[ 6.131319] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 6.282321] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 6.284600] acer-wmi: Brightness must be controlled by generic video
driver
[ 6.360321] thermal LNXTHERM:01: registered as thermal_zone0
[ 6.360478] ACPI: Thermal Zone [TZS0] (48 C)
[ 6.367190] thermal LNXTHERM:02: registered as thermal_zone1
[ 6.367336] ACPI: Thermal Zone [TZS1] (41 C)
[ 6.530591] usbcore: registered new interface driver usbfs
[ 6.530794] usbcore: registered new interface driver hub
[ 6.531061] usbcore: registered new device driver usb
[ 6.535194] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 6.537359] agpgart-intel 0000:00:00.0: detected 131068K stolen
memory, trimming to 32768K
[ 6.559095] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.663354] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 6.663575] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 6.663780] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.663981] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 6.664244] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.668341] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4405c00
[ 6.683722] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.683939] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.684077] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.684257] usb usb1: Product: EHCI Host Controller
[ 6.684385] usb usb1: Manufacturer: Linux 2.6.36-rc4 ehci_hcd
[ 6.684515] usb usb1: SerialNumber: 0000:00:1a.0
[ 6.684805] hub 1-0:1.0: USB hub found
[ 6.684948] hub 1-0:1.0: 3 ports detected
[ 6.685245] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 6.685447] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.685600] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 6.686569] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.690641] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd4405800
[ 6.703702] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.703908] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.704044] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.704224] usb usb2: Product: EHCI Host Controller
[ 6.704350] usb usb2: Manufacturer: Linux 2.6.36-rc4 ehci_hcd
[ 6.704481] usb usb2: SerialNumber: 0000:00:1d.0
[ 6.704744] hub 2-0:1.0: USB hub found
[ 6.704873] hub 2-0:1.0: 3 ports detected
[ 6.932586] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input5
[ 6.995532] usb 1-1: new high speed USB device using ehci_hcd and
address 2
[ 7.076671] usbcore: registered new interface driver usbserial
[ 7.077166] USB Serial support registered for generic
[ 7.128184] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 7.128347] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 7.129014] hub 1-1:1.0: USB hub found
[ 7.129416] hub 1-1:1.0: 6 ports detected
[ 7.178516] cfg80211: Calling CRDA to update world regulatory domain
[ 7.239408] usb 2-1: new high speed USB device using ehci_hcd and
address 2
[ 7.371870] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 7.372038] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 7.372721] hub 2-1:1.0: USB hub found
[ 7.372945] hub 2-1:1.0: 8 ports detected
[ 7.435270] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.443493] usb 1-1.6: new high speed USB device using ehci_hcd and
address 3
[ 7.510615] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 7.711091] hda_codec: ALC271X: BIOS auto-probing.
[ 7.711890] hda_codec: connection list not available for 0x24
[ 7.713723] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 7.799544] usb 1-1.6: New USB device found, idVendor=0bda,
idProduct=0138
[ 7.799713] usb 1-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 7.799953] usb 1-1.6: Product: USB2.0-CRW
[ 7.800084] usb 1-1.6: Manufacturer: Generic
[ 7.800217] usb 1-1.6: SerialNumber: 20090516388200000
[ 7.816272] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
in-tree:
[ 7.816510] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 7.816875] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 7.817382] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R)
Advanced-N 6200 AGN, REV=0x74
[ 7.834965] iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 7.835196] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
[ 7.866108] Initializing USB Mass Storage driver...
[ 7.866446] scsi4 : usb-storage 1-1.6:1.0
[ 7.866700] usbcore: registered new interface driver usb-storage
[ 7.866834] USB Mass Storage support registered.
[ 7.875270] usb 2-1.5: new high speed USB device using ehci_hcd and
address 3
[ 8.001330] usb 2-1.5: New USB device found, idVendor=064e,
idProduct=a219
[ 8.001495] usb 2-1.5: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 8.001755] usb 2-1.5: Product: 1.3M WebCam
[ 8.001880] usb 2-1.5: Manufacturer: Suyin
[ 8.002003] usb 2-1.5: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[ 8.006411] usbcore: registered new interface driver usbserial_generic
[ 8.006566] usbserial: USB Serial Driver core
[ 8.206406] USB Serial support registered for GSM modem (1-port)
[ 8.206629] usbcore: registered new interface driver option
[ 8.206787] option: v0.7.2:USB Driver for GSM modems
[ 8.232517] iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1
build 25532
[ 8.316670] Linux video capture interface: v2.00
[ 8.391729] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[ 8.401699] input: 1.3M WebCam as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
[ 8.402055] usbcore: registered new interface driver uvcvideo
[ 8.402207] USB Video Class driver (v0.1.0)
[ 8.694609] cfg80211: World regulatory domain updated:
[ 8.694765] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 8.695005] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 8.695161] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 8.695313] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 8.695471] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 8.695629] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 8.865797] scsi 4:0:0:0: Direct-Access Generic- Multi-Card
1.00 PQ: 0 ANSI: 0 CCS
[ 8.867769] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 8.873486] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 9.996466] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 10.092805] EXT4-fs (sda6): Ignoring deprecated nobh option
[ 10.095448] EXT4-fs (sda6): re-mounted. Opts:
nobh,data=writeback,errors=remount-ro
[ 10.272830] loop: module loaded
[ 10.578772] fuse init (API version 7.15)
[ 12.154833] NET: Registered protocol family 10
[ 12.156215] lo: Disabled Privacy Extensions
[ 12.545274] RPC: Registered udp transport module.
[ 12.545486] RPC: Registered tcp transport module.
[ 12.545737] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.623061] FS-Cache: Loaded
[ 12.892162] FS-Cache: Netfs 'nfs' registered for caching
[ 13.009734] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.008753] intel ips 0000:00:1f.6: Warning: CPU TDP doesn't match
expected value (found 11, expected 18)
[ 18.008999] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 18.009632] intel ips 0000:00:1f.6: failed to get i915 symbols,
graphics turbo disabled
[ 18.010050] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp
limit 65535
[ 23.206133] general protection fault: 0000 [#1] PREEMPT SMP
[ 23.206484] last sysfs file: /sys/bus/pci/drivers/intel ips/uevent
[ 23.206625] CPU 3
[ 23.206704] Modules linked in: intel_ips nfsd exportfs nfs lockd
fscache auth_rpcgss sunrpc ipv6 fuse loop arc4 uvcvideo ecb videodev
option usb_wwan v4l1_compat v4l2_compat_ioctl32 usb_storage
snd_hda_codec_intelhdmi iwlagn snd_hda_codec_realtek iwlcore mac80211
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss cfg80211
snd_pcm usbserial snd_timer video ehci_hcd intel_agp usbcore psmouse snd
thermal acer_wmi processor i2c_i801 backlight soundcore nls_base rfkill
serio_raw pcspkr output snd_page_alloc i2c_core led_class wmi ac evdev
button battery thermal_sys agpgart
[ 23.211688]
[ 23.211811] Pid: 0, comm: kworker/0:1 Not tainted 2.6.36-rc4 #4 Base
Board Product Name/Aspire 1830T
[ 23.212008] RIP: 0010:[<ffffffffa01720e9>] [<ffffffffa01720e9>]
do_disable_cpu_turbo+0x29/0x30 [intel_ips]
[ 23.212282] RSP: 0018:ffff8800018c3f80 EFLAGS: 00010002
[ 23.212420] RAX: 0000000100000009 RBX: ffff880001892f40 RCX:
0000000000000199
[ 23.212563] RDX: 0000000000000001 RSI: 0000000000000000 RDI:
ffff8801354ad840
[ 23.212708] RBP: 0000000000000003 R08: 0000000000000001 R09:
0000000000000001
[ 23.212852] R10: 0000000000000001 R11: 0000000000000001 R12:
00000000ffffffff
[ 23.212996] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000
[ 23.213141] FS: 0000000000000000(0000) GS:ffff8800018c0000(0000)
knlGS:0000000000000000
[ 23.213335] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 23.213474] CR2: 00007fe9726be00f CR3: 000000000161c000 CR4:
00000000000006e0
[ 23.213618] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 23.213762] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 23.213907] Process kworker/0:1 (pid: 0, threadinfo ffff880137d7e000,
task ffff880137c9f770)
[ 23.214101] Stack:
[ 23.214223] ffffffff8106ee1c 0000000000000008 ffff880137d7fe40
0000000000000005
[ 23.214575] <0> ffffffff8101d072 ffff880137d7fe40 ffffffff81003913
ffff880137d7fe40 <EOI>
[ 23.215172] <0> 0000000000000000 0000000000000001 00000005ae1d6bfc
00000000000000c8
[ 23.215816] Call Trace:
[ 23.216665] <IRQ>
[ 23.216829] [<ffffffff8106ee1c>] ?
generic_smp_call_function_interrupt+0x5c/0x110
[ 23.217010] [<ffffffff8101d072>] ? smp_call_function_interrupt+0x22/0x40
[ 23.217140] [<ffffffff81003913>] ? call_function_interrupt+0x13/0x20
[ 23.217263] <EOI>
[ 23.217424] [<ffffffff8120b996>] ? intel_idle+0xa6/0xf0
[ 23.217547] [<ffffffff8120b976>] ? intel_idle+0x86/0xf0
[ 23.217671] [<ffffffff812b6892>] ? cpuidle_idle_call+0x92/0x100
[ 23.217795] [<ffffffff81001907>] ? cpu_idle+0x57/0xc0
[ 23.217914] Code: 00 00 b9 99 01 00 00 0f 32 48 c1 e2 20 89 c0 48 09
c2 48 b8 00 00 00 00 01 00 00 00 48 85 c2 75 0c 48 09 d0 48 89 c2 48 c1
ea 20 <0f> 30 f3 c3 0f 1f 00 0f b7 c6 66 d1 ef 6b c0 64 d1 f8 8d 04 07
[ 23.221510] RIP [<ffffffffa01720e9>] do_disable_cpu_turbo+0x29/0x30
[intel_ips]
[ 23.221738] RSP <ffff8800018c3f80>
[ 23.221851] ---[ end trace e34c375ac83f1124 ]---
[ 23.221859] general protection fault: 0000 [#2] PREEMPT SMP
[ 23.221867] last sysfs file: /sys/bus/pci/drivers/intel ips/uevent
[ 23.221870] CPU 0
[ 23.221872] Modules linked in: intel_ips nfsd exportfs nfs lockd
fscache auth_rpcgss sunrpc ipv6 fuse loop arc4 uvcvideo ecb videodev
option usb_wwan v4l1_compat v4l2_compat_ioctl32 usb_storage
snd_hda_codec_intelhdmi iwlagn snd_hda_codec_realtek iwlcore mac80211
snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss cfg80211
snd_pcm usbserial snd_timer video ehci_hcd intel_agp usbcore psmouse snd
thermal acer_wmi processor i2c_i801 backlight soundcore nls_base rfkill
serio_raw pcspkr output snd_page_alloc i2c_core led_class wmi ac evdev
button battery thermal_sys agpgart
[ 23.221930]
[ 23.221935] Pid: 0, comm: swapper Tainted: G D 2.6.36-rc4 #4
Base Board Product Name/Aspire 1830T
[ 23.221940] RIP: 0010:[<ffffffffa01720e9>] [<ffffffffa01720e9>]
do_disable_cpu_turbo+0x29/0x30 [intel_ips]
[ 23.221950] RSP: 0018:ffff880001803f80 EFLAGS: 00010002
[ 23.221954] RAX: 0000000100000009 RBX: ffff880001892f40 RCX:
0000000000000199
[ 23.221958] RDX: 0000000000000001 RSI: 0000000000000000 RDI:
ffff8801354ad840
[ 23.221962] RBP: 0000000000000000 R08: 0000000000000001 R09:
0000000000000001
[ 23.221966] R10: 0000000000000001 R11: 0000000000000001 R12:
00000000ffffffff
[ 23.221970] R13: ffffffffffffffff R14: 0000000000075000 R15:
fffffffff000bd02
[ 23.221975] FS: 0000000000000000(0000) GS:ffff880001800000(0000)
knlGS:0000000000000000
[ 23.221980] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 23.221984] CR2: 0000000001e9a2a0 CR3: 0000000137eac000 CR4:
00000000000006f0
[ 23.221988] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 23.221993] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 23.221997] Process swapper (pid: 0, threadinfo ffffffff81600000,
task ffffffff81624020)
[ 23.222000] Stack:
[ 23.222002] ffffffff8106ee1c 0000000000000008 ffffffff81601e80
000000000000bbfd
[ 23.222009] <0> ffffffff8101d072 ffffffff81601e80 ffffffff81003913
ffffffff81601e80 <EOI>
[ 23.222018] <0> 0000000000000000 0000000000000001 0000000593a832cd
00000000000000c8
[ 23.222026] Call Trace:
[ 23.222028] <IRQ>
[ 23.222037] [<ffffffff8106ee1c>] ?
generic_smp_call_function_interrupt+0x5c/0x110
[ 23.222045] [<ffffffff8101d072>] ? smp_call_function_interrupt+0x22/0x40
[ 23.222052] [<ffffffff81003913>] ? call_function_interrupt+0x13/0x20
[ 23.222057] <EOI>
[ 23.222064] [<ffffffff8120b996>] ? intel_idle+0xa6/0xf0
[ 23.222069] [<ffffffff8120b976>] ? intel_idle+0x86/0xf0
[ 23.222076] [<ffffffff812b6892>] ? cpuidle_idle_call+0x92/0x100
[ 23.222082] [<ffffffff81001907>] ? cpu_idle+0x57/0xc0
[ 23.222092] [<ffffffff8166ec04>] ? start_kernel+0x2d3/0x2de
[ 23.222099] [<ffffffff8166e3c4>] ? x86_64_start_kernel+0xe5/0xe9
[ 23.222102] Code: 00 00 b9 99 01 00 00 0f 32 48 c1 e2 20 89 c0 48 09
c2 48 b8 00 00 00 00 01 00 00 00 48 85 c2 75 0c 48 09 d0 48 89 c2 48 c1
ea 20 <0f> 30 f3 c3 0f 1f 00 0f b7 c6 66 d1 ef 6b c0 64 d1 f8 8d 04 07
[ 23.222147] RIP [<ffffffffa01720e9>] do_disable_cpu_turbo+0x29/0x30
[intel_ips]
[ 23.222155] RSP <ffff880001803f80>
[ 23.222159] ---[ end trace e34c375ac83f1125 ]---
[ 23.222163] general protection fault: 0000 [#3] PREEMPT SMP
[ 23.222168] Kernel panic - not syncing: Fatal exception in interrupt
[ 23.222170]
[ 23.222174] Pid: 0, comm: swapper Tainted: G D 2.6.36-rc4 #4
[ 23.222177] last sysfs file: /sys/bus/pci/drivers/intel ips/uevent
[ 23.222180] Call Trace:
[ 23.222182] CPU 1 <IRQ>
[ 23.222185] Modules linked in: intel_ips [<ffffffff8135b096>] ?
panic+0x9c/0x1a3
[ 23.222193] nfsd exportfs [<ffffffff8135df2e>] ?
_raw_spin_trylock+0xe/0x70
[ 23.222202] nfs lockd [<ffffffff8100742f>] ? oops_end+0xdf/0xe0
[ 23.222211] fscache auth_rpcgss [<ffffffff8135e55f>] ?
general_protection+0x1f/0x30
[ 23.222218] sunrpc ipv6 [<ffffffffa01720e9>] ?
do_disable_cpu_turbo+0x29/0x30 [intel_ips]
[ 23.222226] fuse loop [<ffffffff8106ee1c>] ?
generic_smp_call_function_interrupt+0x5c/0x110
[ 23.222235] arc4 uvcvideo [<ffffffff8101d072>] ?
smp_call_function_interrupt+0x22/0x40
[ 23.222242] ecb videodev [<ffffffff81003913>] ?
call_function_interrupt+0x13/0x20
[ 23.222250] option <EOI> usb_wwan v4l1_compat v4l2_compat_ioctl32
[<ffffffff8120b996>] ? intel_idle+0xa6/0xf0
[ 23.222259] usb_storage snd_hda_codec_intelhdmi [<ffffffff8120b976>]
? intel_idle+0x86/0xf0
[ 23.222266] iwlagn snd_hda_codec_realtek [<ffffffff812b6892>] ?
cpuidle_idle_call+0x92/0x100
[ 23.222274] iwlcore mac80211 [<ffffffff81001907>] ? cpu_idle+0x57/0xc0
[ 23.222281] snd_hda_intel snd_hda_codec [<ffffffff8166ec04>] ?
start_kernel+0x2d3/0x2de
[ 23.222288] snd_hwdep snd_pcm_oss [<ffffffff8166e3c4>] ?
x86_64_start_kernel+0xe5/0xe9
[ 23.222296] snd_mixer_oss cfg80211 snd_pcm usbserial snd_timer video
ehci_hcd intel_agp usbcore psmouse snd thermal acer_wmi processor
i2c_i801 backlight soundcore nls_base rfkill serio_raw pcspkr output
snd_page_alloc i2c_core led_class wmi ac evdev button battery
thermal_sys agpgart
[ 23.222325]
[ 23.222330] Pid: 0, comm: kworker/0:0 Tainted: G D
2.6.36-rc4 #4 Base Board Product Name/Aspire 1830T
[ 23.222335] RIP: 0010:[<ffffffffa01720e9>] [<ffffffffa01720e9>]
do_disable_cpu_turbo+0x29/0x30 [intel_ips]
[ 23.222344] RSP: 0018:ffff880001843f80 EFLAGS: 00010002
[ 23.222348] RAX: 0000000100000005 RBX: ffff880001892f40 RCX:
0000000000000199
[ 23.222353] RDX: 0000000000000001 RSI: 0000000000000000 RDI:
ffff8801354ad840
[ 23.222357] RBP: 0000000000000001 R08: 0000000000000001 R09:
0000000000000001
[ 23.222361] R10: 0000000000000001 R11: 0000000000000001 R12:
00000000ffffffff
[ 23.222365] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000
[ 23.222370] FS: 0000000000000000(0000) GS:ffff880001840000(0000)
knlGS:0000000000000000
[ 23.222374] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 23.222379] CR2: 0000000001e9c808 CR3: 0000000135c8e000 CR4:
00000000000006e0
[ 23.222383] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 23.222388] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 23.222392] Process kworker/0:0 (pid: 0, threadinfo ffff880137d56000,
task ffff880137c9be90)
[ 23.222396] Stack:
[ 23.222398] ffffffff8106ee1c 0000000000000008 ffff880137d57e40
000000000000bbd5
[ 23.222404] <0> ffffffff8101d072 ffff880137d57e40 ffffffff81003913
ffff880137d57e40 <EOI>
[ 23.222412] <0> 0000000000000000 0000000000000001 00000005a231a9fc
00000000000000c8
[ 23.222420] Call Trace:
[ 23.222423] <IRQ>
[ 23.222430] [<ffffffff8106ee1c>] ?
generic_smp_call_function_interrupt+0x5c/0x110
[ 23.222437] [<ffffffff8101d072>] ? smp_call_function_interrupt+0x22/0x40
[ 23.222443] [<ffffffff81003913>] ? call_function_interrupt+0x13/0x20
[ 23.222447] <EOI>
[ 23.222453] [<ffffffff8120b996>] ? intel_idle+0xa6/0xf0
[ 23.222458] [<ffffffff8120b976>] ? intel_idle+0x86/0xf0
[ 23.222465] [<ffffffff812b6892>] ? cpuidle_idle_call+0x92/0x100
[ 23.222470] [<ffffffff81001907>] ? cpu_idle+0x57/0xc0
[ 23.222474] Code: 00 00 b9 99 01 00 00 0f 32 48 c1 e2 20 89 c0 48 09
c2 48 b8 00 00 00 00 01 00 00 00 48 85 c2 75 0c 48 09 d0 48 89 c2 48 c1
ea 20 <0f> 30 f3 c3 0f 1f 00 0f b7 c6 66 d1 ef 6b c0 64 d1 f8 8d 04 07
[ 23.222522] RIP [<ffffffffa01720e9>] do_disable_cpu_turbo+0x29/0x30
[intel_ips]
[ 23.222530] RSP <ffff880001843f80>
[ 23.222533] ---[ end trace e34c375ac83f1126 ]---
[ 23.222537] Kernel panic - not syncing: Fatal exception in interrupt
[ 23.222542] Pid: 0, comm: kworker/0:0 Tainted: G D 2.6.36-rc4 #4
[ 23.222546] Call Trace:
[ 23.222548] <IRQ> [<ffffffff8135b096>] ? panic+0x9c/0x1a3
[ 23.222558] [<ffffffff8135df2e>] ? _raw_spin_trylock+0xe/0x70
[ 23.222565] [<ffffffff8100742f>] ? oops_end+0xdf/0xe0
[ 23.222571] [<ffffffff8135e55f>] ? general_protection+0x1f/0x30
[ 23.222579] [<ffffffffa01720e9>] ? do_disable_cpu_turbo+0x29/0x30
[intel_ips]
[ 23.222587] [<ffffffff8106ee1c>] ?
generic_smp_call_function_interrupt+0x5c/0x110
[ 23.222593] [<ffffffff8101d072>] ? smp_call_function_interrupt+0x22/0x40
[ 23.222599] [<ffffffff81003913>] ? call_function_interrupt+0x13/0x20
[ 23.222603] <EOI> [<ffffffff8120b996>] ? intel_idle+0xa6/0xf0
[ 23.222613] [<ffffffff8120b976>] ? intel_idle+0x86/0xf0
[ 23.222619] [<ffffffff812b6892>] ? cpuidle_idle_call+0x92/0x100
[ 23.222625] [<ffffffff81001907>] ? cpu_idle+0x57/0xc0
[ 23.236887] Kernel panic - not syncing: Fatal exception in interrupt
[ 23.237009] Pid: 0, comm: kworker/0:1 Tainted: G D 2.6.36-rc4 #4
[ 23.237130] Call Trace:
[ 23.237233] <IRQ> [<ffffffff8135b096>] ? panic+0x9c/0x1a3
[ 23.237409] [<ffffffff8135df2e>] ? _raw_spin_trylock+0xe/0x70
[ 23.237531] [<ffffffff8100742f>] ? oops_end+0xdf/0xe0
[ 23.237650] [<ffffffff8135e55f>] ? general_protection+0x1f/0x30
[ 23.237773] [<ffffffffa01720e9>] ? do_disable_cpu_turbo+0x29/0x30
[intel_ips]
[ 23.238671] [<ffffffff8106ee1c>] ?
generic_smp_call_function_interrupt+0x5c/0x110
[ 23.238845] [<ffffffff8101d072>] ? smp_call_function_interrupt+0x22/0x40
[ 23.238971] [<ffffffff81003913>] ? call_function_interrupt+0x13/0x20
[ 23.239091] <EOI> [<ffffffff8120b996>] ? intel_idle+0xa6/0xf0
[ 23.239268] [<ffffffff8120b976>] ? intel_idle+0x86/0xf0
[ 23.239388] [<ffffffff812b6892>] ? cpuidle_idle_call+0x92/0x100
[ 23.239509] [<ffffffff81001907>] ? cpu_idle+0x57/0xc0



UP non-panic dmesg:

[ 0.000000] Linux version 2.6.36-rc4 (root@mobility) (gcc version
4.4.5 20100824 (prerelease) (Debian 4.4.4-11) ) #4 SMP PREEMPT Wed Sep
15 14:08:01 CEST 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc4
root=/dev/sda6 ro single rootflags=data=writeback
netconsole=4444@192.168.0.63/eth0,9353@192.168.0.3/00:15:17:21:1f:02
maxcpus=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b363f000 (usable)
[ 0.000000] BIOS-e820: 00000000b363f000 - 00000000b36bf000 (reserved)
[ 0.000000] BIOS-e820: 00000000b36bf000 - 00000000b37bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b37bf000 - 00000000b37ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b37ff000 - 00000000b3800000 (usable)
[ 0.000000] BIOS-e820: 00000000b3800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or
disabled in BIOS!
[ 0.000000] DMI 2.6 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b3800000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 00000000b37fe120 00074 (v01 ACRSYS ACRPRDCT
00000001 01000013)
[ 0.000000] ACPI: FACP 00000000b37fc000 000F4 (v04 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 00000000b37ea000 0EB16 (v02 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: FACS 00000000b376e000 00040
[ 0.000000] ACPI: ASF! 00000000b37fd000 000A5 (v32 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: HPET 00000000b37fb000 00038 (v01 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: APIC 00000000b37fa000 0008C (v02 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 00000000b37f9000 0003C (v01 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 00000000b37e9000 00176 (v01 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 00000000b37e5000 00028 (v01 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: ASPT 00000000b37e2000 00034 (v04 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: WDAT 00000000b37e1000 00224 (v01 ACRSYS ACRPRDCT
00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 00000000b37e0000 009F1 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000b363f
[ 0.000000] 0: 0x000b37ff -> 0x000b3800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b363f000 -
00000000b36bf000
[ 0.000000] PM: Registered nosave memory: 00000000b36bf000 -
00000000b37bf000
[ 0.000000] PM: Registered nosave memory: 00000000b37bf000 -
00000000b37ff000
[ 0.000000] PM: Registered nosave memory: 00000000b3800000 -
00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 -
00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 -
00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 -
00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 -
00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 -
00000000fed1b000
[ 0.000000] PM: Registered nosave memory: 00000000fed1b000 -
00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001800000 s78144
r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s78144 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 946588
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc4
root=/dev/sda6 ro single rootflags=data=writeback
netconsole=4444@192.168.0.63/eth0,9353@192.168.0.3/00:15:17:21:1f:02
maxcpus=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (65 early reservations)
[ 0.000000] #1 [0001000000 - 000175f010] TEXT DATA BSS
[ 0.000000] #2 [000009d000 - 0000100000] BIOS reserved
[ 0.000000] #3 [0001760000 - 0001760372] BRK
[ 0.000000] #4 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #5 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE
[ 0.000000] #8 [0001760380 - 0001761380] BOOTMEM
[ 0.000000] #9 [0000007000 - 00000072d0] BOOTMEM
[ 0.000000] #10 [0001f62000 - 0001f63000] BOOTMEM
[ 0.000000] #11 [0001f63000 - 0001f64000] BOOTMEM
[ 0.000000] #12 [0002000000 - 0005800000] MEMMAP 0
[ 0.000000] #13 [0001761380 - 0001779380] BOOTMEM
[ 0.000000] #14 [0001779380 - 0001791380] BOOTMEM
[ 0.000000] #15 [0001791380 - 00017a9380] BOOTMEM
[ 0.000000] #16 [00017aa000 - 00017ab000] BOOTMEM
[ 0.000000] #17 [000175f040 - 000175f081] BOOTMEM
[ 0.000000] #18 [000175f0c0 - 000175f103] BOOTMEM
[ 0.000000] #19 [000175f140 - 000175f568] BOOTMEM
[ 0.000000] #20 [000175f580 - 000175f5e8] BOOTMEM
[ 0.000000] #21 [000175f600 - 000175f668] BOOTMEM
[ 0.000000] #22 [000175f680 - 000175f6e8] BOOTMEM
[ 0.000000] #23 [000175f700 - 000175f768] BOOTMEM
[ 0.000000] #24 [000175f780 - 000175f7e8] BOOTMEM
[ 0.000000] #25 [000175f800 - 000175f868] BOOTMEM
[ 0.000000] #26 [000175f880 - 000175f8e8] BOOTMEM
[ 0.000000] #27 [000175f900 - 000175f968] BOOTMEM
[ 0.000000] #28 [000175f980 - 000175f9e8] BOOTMEM
[ 0.000000] #29 [000175fa00 - 000175fa68] BOOTMEM
[ 0.000000] #30 [000175fa80 - 000175fae8] BOOTMEM
[ 0.000000] #31 [000175fb00 - 000175fb68] BOOTMEM
[ 0.000000] #32 [000175fb80 - 000175fbe8] BOOTMEM
[ 0.000000] #33 [000175fc00 - 000175fc68] BOOTMEM
[ 0.000000] #34 [000175fc80 - 000175fce8] BOOTMEM
[ 0.000000] #35 [000175fd00 - 000175fd68] BOOTMEM
[ 0.000000] #36 [000175fd80 - 000175fde8] BOOTMEM
[ 0.000000] #37 [000175fe00 - 000175fe68] BOOTMEM
[ 0.000000] #38 [000175fe80 - 000175fea0] BOOTMEM
[ 0.000000] #39 [000175fec0 - 000175fee0] BOOTMEM
[ 0.000000] #40 [000175ff00 - 000175ff20] BOOTMEM
[ 0.000000] #41 [000175ff40 - 000175ffe5] BOOTMEM
[ 0.000000] #42 [00017a9380 - 00017a9425] BOOTMEM
[ 0.000000] #43 [0001800000 - 000181b000] BOOTMEM
[ 0.000000] #44 [0001840000 - 000185b000] BOOTMEM
[ 0.000000] #45 [0001880000 - 000189b000] BOOTMEM
[ 0.000000] #46 [00018c0000 - 00018db000] BOOTMEM
[ 0.000000] #47 [0001900000 - 000191b000] BOOTMEM
[ 0.000000] #48 [0001940000 - 000195b000] BOOTMEM
[ 0.000000] #49 [0001980000 - 000199b000] BOOTMEM
[ 0.000000] #50 [00019c0000 - 00019db000] BOOTMEM
[ 0.000000] #51 [00017a9440 - 00017a9448] BOOTMEM
[ 0.000000] #52 [00017a9480 - 00017a9488] BOOTMEM
[ 0.000000] #53 [00017a94c0 - 00017a94e0] BOOTMEM
[ 0.000000] #54 [00017a9500 - 00017a9540] BOOTMEM
[ 0.000000] #55 [00017a9540 - 00017a9660] BOOTMEM
[ 0.000000] #56 [00017a9680 - 00017a96c8] BOOTMEM
[ 0.000000] #57 [00017a9700 - 00017a9748] BOOTMEM
[ 0.000000] #58 [00017ab000 - 00017b3000] BOOTMEM
[ 0.000000] #59 [00019db000 - 0001ddb000] BOOTMEM
[ 0.000000] #60 [0005800000 - 0005a00000] BOOTMEM
[ 0.000000] #61 [0005a00000 - 0009a00000] BOOTMEM
[ 0.000000] #62 [00017b3000 - 00017d3000] BOOTMEM
[ 0.000000] #63 [0001ddb000 - 0001e1b000] BOOTMEM
[ 0.000000] #64 [000000c000 - 0000014000] BOOTMEM
[ 0.000000] Memory: 3718004k/5111808k available (3459k kernel code,
1255568k absent, 138236k reserved, 3037k data, 404k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1197.143 MHz processor.
[ 0.000006] Calibrating delay loop (skipped), value calculated using
timer frequency.. 2394.28 BogoMIPS (lpj=4788572)
[ 0.000231] pid_max: default: 32768 minimum: 301
[ 0.000369] Mount-cache hash table entries: 256
[ 0.000623] CPU: Physical Processor ID: 0
[ 0.000730] CPU: Processor Core ID: 0
[ 0.000840] mce: CPU supports 9 MCE banks
[ 0.000960] CPU0: Thermal monitoring enabled (TM1)
[ 0.001079] using mwait in idle threads.
[ 0.001185] Performance Events: PEBS fmt1+, Westmere events, Intel
PMU driver.
[ 0.001492] ... version: 3
[ 0.001598] ... bit width: 48
[ 0.001704] ... generic registers: 4
[ 0.001812] ... value mask: 0000ffffffffffff
[ 0.001923] ... max period: 000000007fffffff
[ 0.002033] ... fixed-purpose events: 3
[ 0.002140] ... event mask: 000000070000000f
[ 0.002338] SMP alternatives: switching to UP code
[ 0.006856] ACPI: Core revision 20100702
[ 0.058678] Setting APIC routing to flat
[ 0.059208] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.098996] CPU0: Intel(R) Core(TM) i3 CPU U 330 @ 1.20GHz
stepping 05
[ 0.215361] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.219117] Brought up 1 CPUs
[ 0.219232] Total of 1 processors activated (2394.28 BogoMIPS).
[ 0.219471] devtmpfs: initialized
[ 0.221871] NET: Registered protocol family 16
[ 0.222073] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.222239] ACPI: bus type pci registered
[ 0.222443] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.222616] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.294603] PCI: Using configuration type 1 for base access
[ 0.295423] bio: create slab <bio-0> at 0
[ 0.304834] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.315192] ACPI: BIOS _OSI(Linux) query ignored
[ 0.316622] ACPI: SSDT 00000000b3691c18 00264 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.318046] ACPI: Dynamic OEM Table Load:
[ 0.318248] ACPI: SSDT (null) 00264 (v01 PmRef Cpu0Ist 00003000
INTL 20051117)
[ 0.319154] ACPI: SSDT 00000000b368f018 00891 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.320498] ACPI: Dynamic OEM Table Load:
[ 0.320699] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001
INTL 20051117)
[ 0.321700] ACPI: SSDT 00000000b3690a98 00303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.323200] ACPI: Dynamic OEM Table Load:
[ 0.323402] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000
INTL 20051117)
[ 0.323947] ACPI: SSDT 00000000b368ed98 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.325388] ACPI: Dynamic OEM Table Load:
[ 0.325587] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000
INTL 20051117)
[ 0.352446] ACPI: Interpreter enabled
[ 0.352555] ACPI: (supports S0 S3 S4 S5)
[ 0.352913] ACPI: Using IOAPIC for interrupt routing
[ 0.369369] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.369964] ACPI: No dock devices found.
[ 0.370074] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.371358] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.373386] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.373505] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.373625] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.373793] pci_root PNP0A08:00: host bridge window [mem
0xc0000000-0xfeafffff]
[ 0.382444] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.382979] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.383229] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive
decode)
[ 0.391738] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.392542] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12
14 15)
[ 0.393308] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.394161] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.395072] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12
14 15)
[ 0.395837] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.396740] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.397596] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.398450] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.399233] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.399412] vgaarb: loaded
[ 0.399595] SCSI subsystem initialized
[ 0.399775] PCI: Using ACPI for IRQ routing
[ 0.400162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.400696] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.402830] Switching to clocksource tsc
[ 0.402978] pnp: PnP ACPI init
[ 0.403103] ACPI: bus type pnp registered
[ 0.404756] pnp 00:05: disabling [io 0x164e-0x164f] because it
overlaps 0000:00:1c.1 BAR 7 [io 0x1000-0x1fff]
[ 0.406268] pnp: PnP ACPI: found 11 devices
[ 0.406377] ACPI: ACPI bus type pnp unregistered
[ 0.406497] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.406612] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.406728] system 00:05: [io 0xffff] has been reserved
[ 0.406840] system 00:05: [io 0xffff] has been reserved
[ 0.406952] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.407074] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.407194] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.407311] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.407429] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.407547] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.407664] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.407781] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.407898] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.408017] system 00:09: [mem 0xff000000-0xffffffff] could not be
reserved
[ 0.408135] system 00:09: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.408254] system 00:09: [mem 0xd4500000-0xd4500fff] has been reserved
[ 0.414957] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.415081] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.415202] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.415324] pci 0000:00:1c.0: bridge window [mem
0xd0400000-0xd13fffff 64bit pref]
[ 0.415496] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.415609] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.415730] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
[ 0.415851] pci 0000:00:1c.1: bridge window [mem
0xd1400000-0xd23fffff 64bit pref]
[ 0.416025] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.416136] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.416255] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.416371] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.416512] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.416652] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.416880] NET: Registered protocol family 2
[ 0.417076] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.417748] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.419279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.419698] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.419814] TCP reno registered
[ 0.419920] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.420059] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.420326] NET: Registered protocol family 1
[ 0.451087] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.451206] Placing 64MB software IO TLB between ffff880005a00000 -
ffff880009a00000
[ 0.451372] software IO TLB at phys 0x5a00000 - 0x9a00000
[ 0.451527] Simple Boot Flag at 0x44 set to 0x1
[ 0.452264] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.454160] VFS: Disk quotas dquot_6.5.2
[ 0.454354] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.455002] msgmni has been set to 7261
[ 0.455363] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.455530] io scheduler noop registered
[ 0.455636] io scheduler deadline registered
[ 0.455787] io scheduler cfq registered (default)
[ 0.456768] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.457400] SCSI Media Changer driver v0.25
[ 0.457570] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.457831] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps
0x1 impl SATA mode
[ 0.458000] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo
pio slum part ems apst
[ 0.458298] scsi0 : ahci
[ 0.458509] scsi1 : ahci
[ 0.458677] scsi2 : ahci
[ 0.458843] scsi3 : ahci
[ 0.459741] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port
0xd4405100 irq 40
[ 0.459905] ata2: DUMMY
[ 0.460007] ata3: DUMMY
[ 0.460109] ata4: DUMMY
[ 0.460299] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.587490] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 0.587623] netconsole: local port 4444
[ 0.587730] netconsole: local IP 192.168.0.63
[ 0.587837] netconsole: interface 'eth0'
[ 0.587943] netconsole: remote port 9353
[ 0.588050] netconsole: remote IP 192.168.0.3
[ 0.588159] netconsole: remote ethernet address 00:15:17:21:1f:02
[ 0.588273] netconsole: device eth0 not up yet, forcing it
[ 0.778804] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.817789] ata1.00: ATA-8: WDC WD5000BEVT-00ZAT0, 01.01A01, max UDMA/133
[ 0.817921] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth
31/32), AA
[ 0.821287] ata1.00: configured for UDMA/133
[ 0.834917] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-0
01.0 PQ: 0 ANSI: 5
[ 0.835259] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.835482] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 0.835702] sd 0:0:0:0: [sda] Write Protect is off
[ 0.835840] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.877090] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 0.877599] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.454645] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps
Full Duplex>
[ 3.503465] console [netcon0] enabled
[ 3.503576] netconsole: network logging started
[ 3.503784] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 3.521302] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.521466] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.521692] mice: PS/2 mouse device common for all mice
[ 3.521973] rtc_cmos 00:06: RTC can wake from S4
[ 3.522138] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.522292] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.522465] cpuidle: using governor ladder
[ 3.522633] cpuidle: using governor menu
[ 3.522743] No iBFT detected.
[ 3.523243] TCP cubic registered
[ 3.523354] NET: Registered protocol family 17
[ 3.523487] Registering the dns_resolver key type
[ 3.524346] rtc_cmos 00:06: setting system clock to 2010-09-15
16:21:52 UTC (1284567712)
[ 3.545924] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 3.553480] EXT3-fs (sda6): error: couldn't mount because of
unsupported optional features (240)
[ 3.558113] EXT4-fs (sda6): INFO: recovery required on readonly
filesystem
[ 3.558353] EXT4-fs (sda6): write access will be enabled during recovery
[ 3.631958] EXT4-fs (sda6): recovery complete
[ 3.633507] EXT4-fs (sda6): mounted filesystem with writeback data
mode. Opts: data=writeback
[ 3.633860] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
[ 3.634019] Freeing unused kernel memory: 404k freed
[ 3.634250] Write protecting the kernel read-only data: 6144k
[ 3.634561] Freeing unused kernel memory: 620k freed
[ 3.634946] Freeing unused kernel memory: 944k freed
[ 5.202737] udevd (86): /proc/86/oom_adj is deprecated, please use
/proc/86/oom_score_adj instead.
[ 5.535557] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.635350] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 5.635623] ACPI: Sleep Button [SLPB]
[ 5.635813] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 5.642329] ACPI: Lid Switch [LID0]
[ 5.642544] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.642808] ACPI: Power Button [PWRF]
[ 5.667271] ACPI: WMI: Skipping duplicate GUID
05901221-D566-11D1-B2F0-00A0C9062910
[ 5.667963] ACPI: WMI: Mapper loaded
[ 5.800249] ACPI: Battery Slot [BAT0] (battery present)
[ 5.810015] ACPI: AC Adapter [ADP1] (on-line)
[ 5.812450] thermal LNXTHERM:01: registered as thermal_zone0
[ 5.812615] ACPI: Thermal Zone [TZS0] (48 C)
[ 5.823860] thermal LNXTHERM:02: registered as thermal_zone1
[ 5.824016] ACPI: Thermal Zone [TZS1] (41 C)
[ 5.874130] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low)
-> IRQ 19
[ 5.874332] ACPI: resource 0000:00:1f.3 [io 0x3000-0x301f] conflicts
with ACPI region SMBI [dma 12288-12303 pref window disabled]
[ 5.874544] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 5.905177] Linux agpgart interface v0.103
[ 6.144975] usbcore: registered new interface driver usbfs
[ 6.145343] usbcore: registered new interface driver hub
[ 6.145692] usbcore: registered new device driver usb
[ 6.373750] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 6.376463] acer-wmi: Brightness must be controlled by generic video
driver
[ 6.643279] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 6.646189] agpgart-intel 0000:00:00.0: detected 131068K stolen
memory, trimming to 32768K
[ 6.662736] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.738481] cfg80211: Calling CRDA to update world regulatory domain
[ 6.798434] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 6.798785] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 6.798951] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.799111] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 6.799328] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.804748] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4405c00
[ 6.820196] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.820435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.820571] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.820750] usb usb1: Product: EHCI Host Controller
[ 6.821042] usb usb1: Manufacturer: Linux 2.6.36-rc4 ehci_hcd
[ 6.821177] usb usb1: SerialNumber: 0000:00:1a.0
[ 6.822828] hub 1-0:1.0: USB hub found
[ 6.822963] hub 1-0:1.0: 3 ports detected
[ 6.823214] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 6.823403] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.823547] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 6.823764] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.829128] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd4405800
[ 6.846360] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.846581] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.846722] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.847639] usb usb2: Product: EHCI Host Controller
[ 6.847769] usb usb2: Manufacturer: Linux 2.6.36-rc4 ehci_hcd
[ 6.847902] usb usb2: SerialNumber: 0000:00:1d.0
[ 6.848305] hub 2-0:1.0: USB hub found
[ 6.848439] hub 2-0:1.0: 3 ports detected
[ 7.007166] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input5
[ 7.132121] usb 1-1: new high speed USB device using ehci_hcd and
address 2
[ 7.264397] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 7.264556] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 7.265127] hub 1-1:1.0: USB hub found
[ 7.265392] hub 1-1:1.0: 6 ports detected
[ 7.375963] usb 2-1: new high speed USB device using ehci_hcd and
address 2
[ 7.510840] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.511016] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 7.511151] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 7.511539] hub 2-1:1.0: USB hub found
[ 7.511885] hub 2-1:1.0: 8 ports detected
[ 7.583970] usb 1-1.6: new high speed USB device using ehci_hcd and
address 3
[ 7.698636] usbcore: registered new interface driver usbserial
[ 7.698976] USB Serial support registered for generic
[ 7.760122] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
in-tree:
[ 7.760313] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 7.760537] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 7.760843] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R)
Advanced-N 6200 AGN, REV=0x74
[ 7.777093] iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 7.777256] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
[ 7.933404] usb 1-1.6: New USB device found, idVendor=0bda,
idProduct=0138
[ 7.933562] usb 1-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 7.933754] usb 1-1.6: Product: USB2.0-CRW
[ 7.933877] usb 1-1.6: Manufacturer: Generic
[ 7.934001] usb 1-1.6: SerialNumber: 20090516388200000
[ 7.946259] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 8.011873] usb 2-1.5: new high speed USB device using ehci_hcd and
address 3
[ 8.027707] Initializing USB Mass Storage driver...
[ 8.027969] scsi4 : usb-storage 1-1.6:1.0
[ 8.028259] usbcore: registered new interface driver usb-storage
[ 8.028393] USB Mass Storage support registered.
[ 8.054134] iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1
build 25532
[ 8.116118] hda_codec: ALC271X: BIOS auto-probing.
[ 8.116615] hda_codec: connection list not available for 0x24
[ 8.117792] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.137790] usb 2-1.5: New USB device found, idVendor=064e,
idProduct=a219
[ 8.137944] usb 2-1.5: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 8.138138] usb 2-1.5: Product: 1.3M WebCam
[ 8.138264] usb 2-1.5: Manufacturer: Suyin
[ 8.138386] usb 2-1.5: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[ 8.143702] usbcore: registered new interface driver usbserial_generic
[ 8.143841] usbserial: USB Serial Driver core
[ 8.297666] USB Serial support registered for GSM modem (1-port)
[ 8.298067] usbcore: registered new interface driver option
[ 8.298204] option: v0.7.2:USB Driver for GSM modems
[ 8.345643] Linux video capture interface: v2.00
[ 8.466151] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[ 8.475972] input: 1.3M WebCam as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
[ 8.476456] usbcore: registered new interface driver uvcvideo
[ 8.476588] USB Video Class driver (v0.1.0)
[ 8.605175] cfg80211: World regulatory domain updated:
[ 8.605317] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 8.605518] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 8.605656] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 8.605793] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 8.605933] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 8.606072] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 9.033068] scsi 4:0:0:0: Direct-Access Generic- Multi-Card
1.00 PQ: 0 ANSI: 0 CCS
[ 9.033917] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 9.040630] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 9.814864] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 9.894017] EXT4-fs (sda6): Ignoring deprecated nobh option
[ 9.896388] EXT4-fs (sda6): re-mounted. Opts:
nobh,data=writeback,errors=remount-ro
[ 10.026779] loop: module loaded
[ 10.285761] fuse init (API version 7.15)
[ 11.787848] NET: Registered protocol family 10
[ 11.788941] lo: Disabled Privacy Extensions
[ 12.212061] RPC: Registered udp transport module.
[ 12.212249] RPC: Registered tcp transport module.
[ 12.212393] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.289895] FS-Cache: Loaded
[ 12.549345] FS-Cache: Netfs 'nfs' registered for caching
[ 12.655888] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 49.646988] intel ips 0000:00:1f.6: Warning: CPU TDP doesn't match
expected value (found 11, expected 18)
[ 49.647227] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 49.647637] intel ips 0000:00:1f.6: failed to get i915 symbols,
graphics turbo disabled
[ 49.647920] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp
limit 65535
[ 54.843465] general protection fault: 0000 [#1] PREEMPT SMP
[ 54.843809] last sysfs file: /sys/bus/pci/drivers/intel ips/uevent
[ 54.843946] CPU 0
[ 54.844020] Modules linked in: intel_ips nfsd exportfs nfs lockd
fscache auth_rpcgss sunrpc ipv6 fuse loop uvcvideo videodev option arc4
snd_hda_codec_intelhdmi v4l1_compat v4l2_compat_ioctl32 usb_wwan
snd_hda_codec_realtek ecb usb_storage snd_hda_intel snd_hda_codec iwlagn
usbserial snd_hwdep snd_pcm_oss snd_mixer_oss iwlcore mac80211 snd_pcm
snd_timer cfg80211 ehci_hcd intel_agp psmouse snd processor acer_wmi
video usbcore rfkill soundcore agpgart i2c_i801 backlight serio_raw
i2c_core led_class output ac thermal wmi button battery thermal_sys
evdev snd_page_alloc pcspkr nls_base
[ 54.848814]
[ 54.848932] Pid: 1185, comm: ips-adjust Not tainted 2.6.36-rc4 #4
Base Board Product Name/Aspire 1830T
[ 54.849124] RIP: 0010:[<ffffffffa00290e9>] [<ffffffffa00290e9>]
do_disable_cpu_turbo+0x29/0x30 [intel_ips]
[ 54.849389] RSP: 0018:ffff880134525e78 EFLAGS: 00010002
[ 54.849521] RAX: 0000000100000009 RBX: ffffffffa00290c0 RCX:
0000000000000199
[ 54.849643] RDX: 0000000000000001 RSI: 0000000000000008 RDI:
ffff880135d109c0
[ 54.849765] RBP: ffff880135d109c0 R08: ffffffff81655120 R09:
0000000000000000
[ 54.849887] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 54.850008] R13: 0000000080000000 R14: 00000000000000f9 R15:
00000000000001ac
[ 54.850131] FS: 0000000000000000(0000) GS:ffff880001800000(0000)
knlGS:0000000000000000
[ 54.850302] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 54.850418] CR2: 0000000001265008 CR3: 0000000136864000 CR4:
00000000000006f0
[ 54.850540] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 54.850662] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 54.850783] Process ips-adjust (pid: 1185, threadinfo
ffff880134524000, task ffff880134de3e90)
[ 54.850954] Stack:
[ 54.851056] ffffffff8104538c ffff880135d109c0 ffff880135d10a00
0000000000000000
[ 54.851328] <0> ffffffffa00296ca ffff880134525f00 ffff880135d109c0
ffffffffa0029410
[ 54.851745] <0> ffff880134547c98 ffff880134525f00 ffff880135d109c0
ffffffffa0029410
[ 54.852251] Call Trace:
[ 54.852361] [<ffffffff8104538c>] ? on_each_cpu+0x3c/0x80
[ 54.852480] [<ffffffffa00296ca>] ? ips_adjust+0x2ba/0x3f0 [intel_ips]
[ 54.852603] [<ffffffffa0029410>] ? ips_adjust+0x0/0x3f0 [intel_ips]
[ 54.853450] [<ffffffffa0029410>] ? ips_adjust+0x0/0x3f0 [intel_ips]
[ 54.853574] [<ffffffff8105a846>] ? kthread+0x96/0xa0
[ 54.853693] [<ffffffff81003b94>] ? kernel_thread_helper+0x4/0x10
[ 54.853815] [<ffffffff8105a7b0>] ? kthread+0x0/0xa0
[ 54.853931] [<ffffffff81003b90>] ? kernel_thread_helper+0x0/0x10
[ 54.854048] Code: 00 00 b9 99 01 00 00 0f 32 48 c1 e2 20 89 c0 48 09
c2 48 b8 00 00 00 00 01 00 00 00 48 85 c2 75 0c 48 09 d0 48 89 c2 48 c1
ea 20 <0f> 30 f3 c3 0f 1f 00 0f b7 c6 66 d1 ef 6b c0 64 d1 f8 8d 04 07
[ 54.857483] RIP [<ffffffffa00290e9>] do_disable_cpu_turbo+0x29/0x30
[intel_ips]
[ 54.857702] RSP <ffff880134525e78>
[ 54.857812] ---[ end trace 4c3f4f3e72ed300e ]---
[ 54.857925] note: ips-adjust[1185] exited with preempt_count 1



root@mobility:~# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 37
model name : Intel(R) Core(TM) i3 CPU U 330 @ 1.20GHz
stepping : 5
cpu MHz : 1197.143
cache size : 3072 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp
lm constant_tsc up arch_perfmon pebs bts rep_good xtopology nonstop_tsc
aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm
sse4_1 sse4_2 popcnt lahf_lm arat tpr_shadow vnmi flexpriority ept vpid
bogomips : 2394.28
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:



00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller
(rev 02)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Core Processor
Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3050 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-

00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series
Chipset HECI Controller (rev 06)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d4406100 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000

00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4405c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4179
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0
<64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=02
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: HDA Intel

00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d3400000-d43fffff
Prefetchable memory behind bridge: 00000000d0400000-00000000d13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 040e
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d2400000-d33fffff
Prefetchable memory behind bridge: 00000000d1400000-00000000d23fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 040e
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d4405800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
(prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device 040e

00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC
Interface Controller (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset
4 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at 3048 [size=8]
Region 1: I/O ports at 305c [size=4]
Region 2: I/O ports at 3040 [size=8]
Region 3: I/O ports at 3058 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at d4405000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4151
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at d4406000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]

00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400
Series Chipset Thermal Subsystem (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d4404000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Kernel driver in use: intel ips

01:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit
Ethernet (rev c0)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at d3400000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 2000 [size=128]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4159
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
unlimited, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [6c] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [180 v1] Device Serial Number ff-a8-9b-37-00-26-2d-ff
Kernel driver in use: atl1c

02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200
(rev 35)
Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d2400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4169
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1
unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<128ns, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-27-10-ff-ff-23-16-04
Kernel driver in use: iwlagn

ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath
Architecture Generic Non-core Registers (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0
(rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0

ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
Subsystem: Acer Incorporated [ALI] Device 040e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0


dmidecode:
# dmidecode 2.9
SMBIOS 2.6 present.
51 structures occupying 2237 bytes.
Table at 0x000EA690.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: INSYDE
Version: V1.11
Release Date: 06/04/2010
ROM Size: 2048 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
8042 keyboard services are supported (int 9h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 11.240

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Acer
Product Name: Aspire 1830T
Version: V1.11
Serial Number: LXPTS02028021154A92000
UUID: 10938DC0-6A90-11DF-B43D-EBE2BBF7D956
Wake-up Type: Power Switch
SKU Number: Calpella_CRB
Family: Intel_Mobile

Handle 0x0002, DMI type 2, 16 bytes
Base Board Information
Manufacturer: Intel Corp.
Product Name: Base Board Product Name
Version: Base Board Version
Serial Number: Base Board Serial Number
Asset Tag: Base Board Asset Tag
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Base Board Chassis Location
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer: Chassis Manufacturer
Type: Other
Lock: Not Present
Version: Chassis Version
Serial Number: Chassis Serial Number
Asset Tag: Not Specified
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0

Handle 0x0004, DMI type 9, 17 bytes
System Slot Information
Designation: J5C1
Type: x16 <OUT OF SPEC>
Current Usage: Available
Length: Other
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x0005, DMI type 9, 17 bytes
System Slot Information
Designation: J6C1
Type: x1 <OUT OF SPEC>
Current Usage: Available
Length: Other
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x0006, DMI type 9, 17 bytes
System Slot Information
Designation: J6C2
Type: x1 <OUT OF SPEC>
Current Usage: Available
Length: Other
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x0007, DMI type 9, 17 bytes
System Slot Information
Designation: J6D2
Type: x1 <OUT OF SPEC>
Current Usage: Available
Length: Other
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x0008, DMI type 9, 17 bytes
System Slot Information
Designation: J7C1
Type: x1 <OUT OF SPEC>
Current Usage: Available
Length: Other
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x0009, DMI type 9, 17 bytes
System Slot Information
Designation: J7D2
Type: x1 <OUT OF SPEC>
Current Usage: Available
Length: Other
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x000A, DMI type 9, 17 bytes
System Slot Information
Designation: J8C2
Type: x16 <OUT OF SPEC>
Current Usage: Available
Length: Other
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x000B, DMI type 9, 17 bytes
System Slot Information
Designation: J8C1
Type: x1 <OUT OF SPEC>
Current Usage: Available
Length: Other
Characteristics:
PME signal is supported
Hot-plug devices are supported

Handle 0x000C, DMI type 11, 5 bytes
OEM Strings
String 1: String1 for Original Equipment Manufacturer
String 2: String2 for Original Equipment Manufacturer
String 3: String3 for Original Equipment Manufacturer
String 4: String4 for Original Equipment Manufacturer
String 5: String5 for Original Equipment Manufacturer

Handle 0x000D, DMI type 12, 5 bytes
System Configuration Options
Option 1: String1 for Type12 Equipment Manufacturer
Option 2: String2 for Type12 Equipment Manufacturer
Option 3: String3 for Type12 Equipment Manufacturer
Option 4: String4 for Type12 Equipment Manufacturer

Handle 0x000E, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 4

Handle 0x000F, DMI type 27, 14 bytes
Cooling Device
Type: Fan
Status: OK
OEM-specific Information: 0x00000000
Nominal Speed: 2000 rpm

Handle 0x0010, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected

Handle 0x0011, DMI type 39, 22 bytes
System Power Supply
Location: OEM_Define0
Name: OEM_Define1
Manufacturer: OEM_Define2
Serial Number: OEM_Define3
Asset Tag: OEM_Define4
Model Part Number: OEM_Define5
Revision: OEM_Define6
Max Power Capacity: 0.075 W
Status: Present, OK
Type: Regulator
Input Voltage Range Switching: Auto-switch
Plugged: No
Hot Replaceable: No
Cooling Device Handle: 0x000F

Handle 0x0012, DMI type 40, 18 bytes
Unknown Type
Header and Data:
28 12 12 00 02 06 04 00 05 01 AA 07 00 00 05 02
DC 05
Strings:
PCIExpressx16
Compiler Version: VC 9.0

Handle 0x0013, DMI type 41, 11 bytes
Unknown Type
Header and Data:
29 0B 13 00 01 85 01 00 00 00 01
Strings:
Hanksville Gbe Lan Connection

Handle 0x0014, DMI type 22, 26 bytes
Portable Battery
Location: Fake
Manufacturer: -Virtual Battery 0-
Manufacture Date: 10/12/2007
Serial Number: Battery 0
Name: CRB Battery 0
Chemistry: Lithium Ion
Design Capacity: Unknown
Design Voltage: Unknown
SBDS Version: Not Specified
Maximum Error: Unknown
OEM-specific Information: 0x00000000

Handle 0x0015, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 15 00 5A 5A

Handle 0x0016, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 16 00 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001

Handle 0x0017, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 17 00 24 41 4D 54 01 01 01 01 01 A5 1F 02
00 00 00 00

Handle 0x0018, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 16 GB
Error Information Handle: No Error
Number Of Devices: 2

Handle 0x0019, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: 0x001B
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: None
Locator: DIMM0
Bank Locator: BANK 0
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 800 MHz (1.2 ns)
Manufacturer: Not Specified
Serial Number: 00000000
Asset Tag: Unknown
Part Number: Not Specified

Handle 0x001A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: None
Current Speed: 1 ns
Type: DIMM
Installed Size: 2048 MB (Single-bank Connection)
Enabled Size: 2048 MB (Single-bank Connection)
Error Status: OK

Handle 0x001B, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x001C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0019
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: Unknown
Interleave Position: 1
Interleaved Data Depth: 1

Handle 0x001D, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK 1
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 800 MHz (1.2 ns)
Manufacturer: Not Specified
Serial Number: 00000000
Asset Tag: Unknown
Part Number: Not Specified

Handle 0x001E, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: None
Current Speed: 1 ns
Type: DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK

Handle 0x001F, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x0020, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: 0x0022
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: None
Locator: DIMM1
Bank Locator: BANK 2
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 800 MHz (1.2 ns)
Manufacturer: Not Specified
Serial Number: 8417E75F
Asset Tag: Unknown
Part Number: M471B5673EH1-CF8

Handle 0x0021, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: None
Current Speed: 1 ns
Type: DIMM
Installed Size: 2048 MB (Single-bank Connection)
Enabled Size: 2048 MB (Single-bank Connection)
Error Status: OK

Handle 0x0022, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x0023, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0020
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: Unknown
Interleave Position: 2
Interleaved Data Depth: 1

Handle 0x0024, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: Not Provided
Total Width: 8 bits
Data Width: 8 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM3
Bank Locator: BANK 3
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 800 MHz (1.2 ns)
Manufacturer: Not Specified
Serial Number: 00000000
Asset Tag: Unknown
Part Number: Not Specified

Handle 0x0025, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: None
Current Speed: 1 ns
Type: DIMM
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK

Handle 0x0026, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x0027, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown

Handle 0x0028, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Array Handle: 0x0018
Partition Width: 0

Handle 0x0029, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
Unknown
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 8192 MB
Maximum Total Memory Size: 16384 MB
Supported Speeds:
Other
Supported Memory Types:
Other
Memory Module Voltage: Unknown
Associated Memory Slots: 2
0x001A
0x0021
Enabled Error Correcting Capabilities:
None

Handle 0x002A, DMI type 170, 38 bytes
OEM-specific Type
Header and Data:
AA 26 2A 00 01 00 08 00 00 00 0C 00 06 00 04 02
41 08 64 02 08 00 63 02 04 00 83 02 04 00 82 02
02 00 24 02 08 00

Handle 0x002B, DMI type 171, 24 bytes
OEM-specific Type
Header and Data:
AB 18 2B 00 02 69 19 73 10 04 4E 06 19 A2 05 86
80 56 3B 07 86 80 2C 42

Handle 0x002C, DMI type 172, 6 bytes
OEM-specific Type
Header and Data:
AC 06 2C 00 01 00

Handle 0x002D, DMI type 4, 42 bytes
Processor Information
Socket Designation: CPU
Type: Central Processor
Family: <OUT OF SPEC>
Manufacturer: Intel(R) Corporation
ID: 55 06 02 00 FF FB EB BF
Version: Intel(R) Core(TM) i3 CPU U 330 @ 1.20GHz
Voltage: 0.0 V
External Clock: 1066 MHz
Max Speed: 1200 MHz
Current Speed: 1204 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0031
L2 Cache Handle: 0x0030
L3 Cache Handle: 0x002E
Serial Number: Not Specified
Asset Tag: FFFF
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 4
Characteristics:
64-bit capable

Handle 0x002E, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3 Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Through
Location: Internal
Installed Size: 3072 KB
Maximum Size: 3072 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: Other

Handle 0x002F, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative

Handle 0x0030, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 256 KB
Maximum Size: 256 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative

Handle 0x0031, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Instruction
Associativity: 4-way Set-associative

Handle 0x0032, DMI type 127, 4 bytes
End Of Table


\
 
 \ /
  Last update: 2010-09-15 16:47    [W:0.124 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site