lkml.org 
[lkml]   [2010]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: BUG: IPv6 stops working after a while, needs ip ne del command to reset

Sorry for the late reply. I've been swamped.

On Wed, 1 Sep 2010, Brian Haley wrote:
> So are you running with this set to "Shared Network Port" mode? I'm
> guessing you are.

Yes, there's no dedicated ILO port.

> There was another report on netdev back in 11/2008 on this exact hardware,
> with the same problem.

I can't seem to find it. Do you happen to have the subject line or
something?

> I dug-up my notes on the problem, and from what I can tell, the receive
> multicast filters on the NIC were getting removed, causing both incoming
> IPv6 and IPv4 multicast packets to get dropped.

Sounds about right. From what I understand the relevant registers were
still the same for me when it wasn't working though (if that indeed is
how the filter is implemented).

---------
typedef struct me_s {
char name[] = { "Thomas Habets" };
char email[] = { "thomas@habets.pp.se" };
char kernel[] = { "Linux" };
char *pgpKey[] = { "http://www.habets.pp.se/pubkey.txt" };
char pgp[] = { "A8A3 D1DD 4AE0 8467 7FDE 0945 286A E90A AD48 E854" };
char coolcmd[] = { "echo '. ./_&. ./_'>_;. ./_" };
} me_t;


\
 
 \ /
  Last update: 2010-09-14 21:59    [W:0.070 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site