lkml.org 
[lkml]   [2010]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRE: [PATCH] i2c: cyttsp i2c and spi touchscreen driver init submit
Date
From
HI Trilok,

Thank you for your review. I am collecting your comments below and
starting
a new revision to incorporate your requests.

> -----Original Message-----
> From: Trilok Soni [mailto:tsoni@codeaurora.org]
> Sent: Thursday, August 05, 2010 1:46 PM
> To: Kevin McNeely
> Cc: Dmitry Torokhov; David Brown; Fred; Samuel Ortiz; Eric Miao; Ben
> Dooks; Simtec Linux Team; Todd Fischer; Arnaud Patard; Sascha Hauer;
> Henrik Rydberg; linux-input@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH] i2c: cyttsp i2c and spi touchscreen driver init
> submit
>
> Hi Kevin,
>
> On 8/5/2010 11:42 PM, Kevin McNeely wrote:
> > From: Fred <fwk@ubuntu.linuxcertified.com>
> >
>
> E-mail address is is wrong again it seems. Please fix.

Will do.

>
> You may want to divide this whole patch into three patches:
>
> 1. core driver
> 2. i2c driver
> 3. spi driver
>
> > This is a new touchscreen driver for the Cypress Semiconductor
> > cyttsp family of devices. This updated driver is for both the i2c
> and spi
> > versions of the devices. The driver code consists of common core
code
> for
> > both i2c and spi driver. This submission is in response to review
> comments
> > from the initial submission.
> >
> > Signed-off-by: Kevin McNeely <kev@cypress.com>
> > ---
> > drivers/input/touchscreen/Kconfig | 33 +
> > drivers/input/touchscreen/Makefile | 3 +
> > drivers/input/touchscreen/cyttsp_board-xxx.c | 110 ++
> > drivers/input/touchscreen/cyttsp_core.c | 1778
> ++++++++++++++++++++++++++
> > drivers/input/touchscreen/cyttsp_core.h | 49 +
> > drivers/input/touchscreen/cyttsp_i2c.c | 183 +++
> > drivers/input/touchscreen/cyttsp_spi.c | 339 +++++
> > include/linux/cyttsp.h | 104 ++
> > 8 files changed, 2599 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/input/touchscreen/cyttsp_board-xxx.c
> > create mode 100755 drivers/input/touchscreen/cyttsp_core.c
> > create mode 100755 drivers/input/touchscreen/cyttsp_core.h
> > create mode 100755 drivers/input/touchscreen/cyttsp_i2c.c
> > create mode 100755 drivers/input/touchscreen/cyttsp_spi.c
> > create mode 100755 include/linux/cyttsp.h
>
> File modes are wrong.
>

Will fix.

>
> >
> > diff --git a/drivers/input/touchscreen/Kconfig
> b/drivers/input/touchscreen/Kconfig
> > index 3b9d5e2..b923379 100644
> > --- a/drivers/input/touchscreen/Kconfig
> > +++ b/drivers/input/touchscreen/Kconfig
> > @@ -603,4 +603,37 @@ config TOUCHSCREEN_TPS6507X
> > To compile this driver as a module, choose M here: the
> > module will be called tps6507x_ts.
> >
> > +config TOUCHSCREEN_CYTTSP_I2C
> > + default n
>
> default n is not required.

Will remove.

>
> > + tristate "Cypress TTSP i2c touchscreen"
> > + depends on I2C
> > + help
> > + Say Y here if you have a Cypress TTSP touchscreen
> > + connected to your system's i2c bus.
> > +
> > + If unsure, say N.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called cyttsp_i2c.
> > +
> > +config TOUCHSCREEN_CYTTSP_SPI
> > + default n
>
> Ditto.
>

Will remove.

> > + tristate "Cypress TTSP spi touchscreen"
> > + depends on SPI_MASTER
> > + help
> > + Say Y here if you have a Cypress TTSP touchscreen
> > + connected to your system's spi bus.
> > +
> > + If unsure, say N.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called cyttsp_spi.
> > +
> > +config TOUCHSCREEN_CYTTSP_CORE
> > + default y
>
> We don't want anything to be default y unless it is curing a cancer.
>

Will remove.

> > diff --git a/drivers/input/touchscreen/cyttsp_board-xxx.c
> b/drivers/input/touchscreen/cyttsp_board-xxx.c
>
> This file is good as example only but not for check in. This is a
board
> specific code and the board-xxx.c
> code in appropriate arch will carry this code. Please remove this file
> from the patch.
>
> > diff --git a/drivers/input/touchscreen/cyttsp_core.c
> b/drivers/input/touchscreen/cyttsp_core.c
> > new file mode 100755
> > index 0000000..95019e9
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/cyttsp_core.c
> > @@ -0,0 +1,1778 @@
> > +/* Core Source for:
> > + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen
> drivers.
> > + * For use with Cypress Txx2xx and Txx3xx parts.
> > + * Supported parts include:
> > + * CY8CTST241
> > + * CY8CTMG240
> > + * CY8CTST341
> > + * CY8CTMA340
> > + *
> > + * Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2, and only version 2, as published by the
> > + * Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public
License
> along
> > + * with this program; if not, write to the Free Software
Foundation,
> Inc.,
> > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> > + *
> > + * Contact Cypress Semiconductor at www.cypress.com
> (kev@cypress.com)
> > + *
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/input.h>
> > +#include <linux/slab.h>
> > +#include <linux/gpio.h>
> > +#include <linux/irq.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/timer.h>
> > +#include <linux/workqueue.h>
> > +#include <linux/byteorder/generic.h>
> > +#include <linux/bitops.h>
> > +#include <linux/cyttsp.h>
> > +#include <linux/ctype.h>
> > +#include "cyttsp_core.h"
> > +
> > +#define DBG(x)
> > +
> > +/* rely on kernel input.h to define Multi-Touch capability */
> > +#ifndef ABS_MT_TRACKING_ID
> > +/* define only if not defined already by system; */
> > +/* value based on linux kernel 2.6.30.10 */
> > +#define ABS_MT_TRACKING_ID (ABS_MT_BLOB_ID + 1)
> > +#endif /* ABS_MT_TRACKING_ID */
>
> We always support and base our code from latest kernel only. Please
> remove the code
> which relies on supporting older kernels.
>

Will do.

> > +
> > +#define TOUCHSCREEN_TIMEOUT (msecs_to_jiffies(28))
> > +/* Bootloader File 0 offset */
> > +#define CY_BL_FILE0 0x00
> > +/* Bootloader command directive */
> > +#define CY_BL_CMD 0xFF
> > +/* Bootloader Enter Loader mode */
> > +#define CY_BL_ENTER 0x38
> > +/* Bootloader Write a Block */
> > +#define CY_BL_WRITE_BLK 0x39
> > +/* Bootloader Terminate Loader mode */
> > +#define CY_BL_TERMINATE 0x3B
> > +/* Bootloader Exit and Verify Checksum command */
> > +#define CY_BL_EXIT 0xA5
> > +/* Bootloader default keys */
> > +#define CY_BL_KEY0 0
> > +#define CY_BL_KEY1 1
> > +#define CY_BL_KEY2 2
> > +#define CY_BL_KEY3 3
> > +#define CY_BL_KEY4 4
> > +#define CY_BL_KEY5 5
> > +#define CY_BL_KEY6 6
> > +#define CY_BL_KEY7 7
> > +
> > +#define CY_DIFF(m, n) ((m) != (n))
>
> And why such macro is required? Why can't we just do "if (i != j)"?

Will replace.

>
> > +
> > +/* TTSP Bootloader Register Map interface definition */
> > +#define CY_BL_CHKSUM_OK 0x01
> > +struct cyttsp_bootloader_data {
> > + u8 bl_file;
> > + u8 bl_status;
> > + u8 bl_error;
> > + u8 blver_hi;
> > + u8 blver_lo;
> > + u8 bld_blver_hi;
> > + u8 bld_blver_lo;
> > + u8 ttspver_hi;
> > + u8 ttspver_lo;
> > + u8 appid_hi;
> > + u8 appid_lo;
> > + u8 appver_hi;
> > + u8 appver_lo;
> > + u8 cid_0;
> > + u8 cid_1;
> > + u8 cid_2;
> > +};
> > +
> > +#define cyttsp_wake_data cyttsp_xydata
>
> Why we need to such assignments and introduce these kind of macros? I
> don't think it is necessary.

Will remove.

>
> > +
> > +struct cyttsp {
> > + struct device *pdev;
>
> Most of the time kernel people understands "pdev == platform device
and
> not just device", so better rename this variable
> to "dev" only.
>
> > + int irq;
> > + struct input_dev *input;
> > + struct work_struct work;
> > + struct timer_list timer;
> > + struct mutex mutex;
> > + char phys[32];
> > + struct cyttsp_platform_data *platform_data;
> > + struct cyttsp_bootloader_data bl_data;
> > + struct cyttsp_sysinfo_data sysinfo_data;
> > + u8 num_prv_st_tch;
> > + u16 act_trk[CY_NUM_TRK_ID];
> > + u16 prv_mt_tch[CY_NUM_MT_TCH_ID];
> > + u16 prv_st_tch[CY_NUM_ST_TCH_ID];
> > + u16 prv_mt_pos[CY_NUM_TRK_ID][2];
> > + struct cyttsp_bus_ops *bus_ops;
> > + unsigned fw_loader_mode:1;
> > + unsigned suspended:1;
> > +};
> > +
> > +struct cyttsp_track_data {
> > + u8 prv_tch;
> > + u8 cur_tch;
> > + u16 tmp_trk[CY_NUM_MT_TCH_ID];
> > + u16 snd_trk[CY_NUM_MT_TCH_ID];
> > + u16 cur_trk[CY_NUM_TRK_ID];
> > + u16 cur_st_tch[CY_NUM_ST_TCH_ID];
> > + u16 cur_mt_tch[CY_NUM_MT_TCH_ID];
> > + /* if NOT CY_USE_TRACKING_ID then only */
> > + /* uses CY_NUM_MT_TCH_ID positions */
> > + u16 cur_mt_pos[CY_NUM_TRK_ID][2];
> > + /* if NOT CY_USE_TRACKING_ID then only */
> > + /* uses CY_NUM_MT_TCH_ID positions */
> > + u8 cur_mt_z[CY_NUM_TRK_ID];
> > + u8 tool_width;
> > + u16 st_x1;
> > + u16 st_y1;
> > + u8 st_z1;
> > + u16 st_x2;
> > + u16 st_y2;
> > + u8 st_z2;
> > +};
> > +
> > +static const u8 bl_cmd[] = {
> > + CY_BL_FILE0, CY_BL_CMD, CY_BL_EXIT,
> > + CY_BL_KEY0, CY_BL_KEY1, CY_BL_KEY2,
> > + CY_BL_KEY3, CY_BL_KEY4, CY_BL_KEY5,
> > + CY_BL_KEY6, CY_BL_KEY7
> > +};
> > +
> > +#define LOCK(m) do { \
> > + DBG(printk(KERN_INFO "%s: lock\n", __func__);) \
> > + mutex_lock(&(m)); \
> > +} while (0);
> > +
> > +#define UNLOCK(m) do { \
> > + DBG(printk(KERN_INFO "%s: unlock\n", __func__);) \
> > + mutex_unlock(&(m)); \
> > +} while (0);
>
> Un-necessary debug macros and abstractions. This is not allowed.
Please
> use mutext_lock and unlock
> APIs directly wherever they are required.

Will change.

>
> > +
> > +DBG(
> > +static void print_data_block(const char *func, u8 command,
> > + u8 length, void *data)
> > +{
> > + char buf[1024];
> > + unsigned buf_len = sizeof(buf);
> > + char *p = buf;
> > + int i;
> > + int l;
> > +
> > + l = snprintf(p, buf_len, "cmd 0x%x: ", command);
> > + buf_len -= l;
> > + p += l;
> > + for (i = 0; i < length && buf_len; i++, p += l, buf_len -= l)
> > + l = snprintf(p, buf_len, "%02x ", *((char *)data + i));
> > + printk(KERN_DEBUG "%s: %s\n", func, buf);
> > +})
>
> Please don't do like DBG(...) like things. As it is strictly for
> debugging purpose only
> please remove this function from the code itself. Developer in need of
> such debugging routines
> will write down their own when they sit for debugging the problem. I
> don't see any need
> of such debugging helpers in the mainlined version of the driver.

Will remove.

>
> > +
> > +static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
> > + u8 length, void *buf)
> > +{
> > + int rc;
> > + int tries;
> > + DBG(printk(KERN_INFO"%s: Enter\n", __func__);)
> > +
> > + if (!buf || !length) {
> > + printk(KERN_ERR "%s: Error, buf:%s len:%u\n",
> > + __func__, !buf ? "NULL" : "OK", length);
> > + return -EIO;
> > + }
> > +
> > + for (tries = 0, rc = 1; tries < CY_NUM_RETRY && rc; tries++)
> > + rc = ts->bus_ops->read(ts->bus_ops, command, length,
buf);
> > +
> > + if (rc < 0)
> > + printk(KERN_ERR "%s: error %d\n", __func__, rc);
> > + DBG(print_data_block(__func__, command, length, buf);)
>
> Please use dev_dbg(...) or pr_debug(...) macros directly instead of
> putting
> them under DBG(...).
>
> It is better you remove DBG(..) from whole driver and replace them
with
> dev_dbg(...) if you have device pointer or use pr_debug(...).

Will do.

>
> > +
> > +static int ttsp_tch_ext(struct cyttsp *ts, void *buf)
> > +{
> > + int rc;
> > + DBG(printk(KERN_INFO"%s: Enter\n", __func__);)
>
> Un-necessary debug statements. Such statements should be removed from
> the driver.

Will do.

>
> > +
> > +/*
>
***********************************************************************
> *
> > + * The cyttsp_xy_worker function reads the XY coordinates and sends
> them to
> > + * the input layer. It is scheduled from the interrupt (or timer).
> > + *
>
***********************************************************************
> **/
> > +void handle_single_touch(struct cyttsp_xydata *xy, struct
> cyttsp_track_data *t,
> > + struct cyttsp *ts)
> > +{

Make static. Ok.

>
> functions should be "static". I would leave a decision to Dmitry if he
> wants the driver
> to support old single touch protocol hacked up with HAT_xx bits so
that
> driver can support
> two touches with the old single touch protocol itself.
>
> I would prefer not to support this single touch because we are hacking
> up this
> because the userspace frameworks are not converted or supporting the
> new MT based protocols.

ST will be removed completely.

>
> > +
> > +void handle_multi_touch(struct cyttsp_track_data *t, struct cyttsp
> *ts)
> > +{
>
> static please.

Ok.

>
> > +
> > +void cyttsp_xy_worker(struct cyttsp *ts)
> > +{
>
> static please.

Ok.

>
> > +
> > + DBG(
> > + if (trc.cur_tch) {
> > + unsigned i;
> > + u8 *pdata = (u8 *)&xy_data;
> > +
> > + printk(KERN_INFO "%s: TTSP data_pack: ", __func__);
> > + for (i = 0; i < sizeof(struct cyttsp_xydata); i++)
> > + printk(KERN_INFO "[%d]=0x%x ", i, pdata[i]);
> > + printk(KERN_INFO "\n");
> > + })
>
> I would really like to remove such DBG formatted code.

Will remove.

>
> > +
> > + /* Determine if display is tilted */
> > + tilt = !!FLIP_DATA(ts->platform_data->flags);
> > + /* Check for switch in origin */
> > + rev_x = !!REVERSE_X(ts->platform_data->flags);
> > + rev_y = !!REVERSE_Y(ts->platform_data->flags);
> > +
>
> ...
>
> > +
> > + /* update platform data for the current multi-touch information
> */
> > + memcpy(ts->act_trk, trc.cur_trk, CY_NUM_TRK_ID);
> > +
> > +exit_xy_worker:
> > + DBG(printk(KERN_INFO"%s: finished.\n", __func__);)
> > + return;
>
> Do you need this return statment?

Will remove.

>
> > +}
> > +
> > +/*
>
***********************************************************************
> *
> > + * ISR function. This function is general, initialized in drivers
> init
> > + * function and disables further IRQs until this IRQ is processed
in
> worker.
> > + *
>
***********************************************************************
> **/
> > +static irqreturn_t cyttsp_irq(int irq, void *handle)
> > +{
> > + struct cyttsp *ts = (struct cyttsp *)handle;
>
> Casting is not required when the source is void *.
>
> > +
> > + DBG(printk(KERN_INFO"%s: Got IRQ!\n", __func__);)
>
> Un-necessary debug statements.

Will remove.

>
> > + cyttsp_xy_worker(ts);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +/* schedulable worker entry for timer polling method */
> > +void cyttsp_xy_worker_(struct work_struct *work)
> > +{
> > + struct cyttsp *ts = container_of(work, struct cyttsp, work);
> > + cyttsp_xy_worker(ts);
> > +}
>
> I would really prefer that you remove the polling method from this
code
> as it will simplify
> a code lot. We can delete the whole workqueue because as you will be
> using request_threaded_irq(...),
> you will not need any workqueue.
>

Polling code will be removed completely.

> > +
> > +/* Timer function used as touch interrupt generator for polling
> method */
> > +static void cyttsp_timer(unsigned long handle)
> > +{
> > + struct cyttsp *ts = (struct cyttsp *)handle;
> > +
> > + DBG(printk(KERN_INFO"%s: TTSP timer event!\n", __func__);)
> > + /* schedule motion signal handling */
> > + if (!work_pending(&ts->work))
> > + schedule_work(&ts->work);
> > + mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
> > + return;
> > +}
>
> I don't see any need of this timer. Better remove the polling method
> all together to simplify the code.
> Only support interrupt based approach only.
>

Polling code will be removed completely.

>
> > +
> > +
> > +/*
>
***********************************************************************
> *
> > + * Probe initialization functions
> > + *
>
***********************************************************************
> * */
> > +static int cyttsp_load_bl_regs(struct cyttsp *ts)
> > +{
> > + int retval;
> > +
> > + DBG(printk(KERN_INFO"%s: Enter\n", __func__);)
> > +
> > + retval = ttsp_read_block_data(ts, CY_REG_BASE,
> > + sizeof(ts->bl_data), &(ts->bl_data));
> > +
> > + if (retval < 0) {
> > + DBG(printk(KERN_INFO "%s: Failed reading block data,
> err:%d\n",
> > + __func__, retval);)
> > + goto fail;
> > + }
> > +
> > + DBG({
> > + int i;
> > + u8 *bl_data = (u8 *)&(ts->bl_data);
> > + for (i = 0; i < sizeof(struct cyttsp_bootloader_data);
i++)
> > + printk(KERN_INFO "%s bl_data[%d]=0x%x\n",
> > + __func__, i, bl_data[i]);
> > + })
>
> Better remove such debug code.

Will remove.

>
> > +
> > + return 0;
> > +fail:
> > + return retval;
> > +}
>
> ...
>
> > +
> > +static ssize_t firmware_write(struct kobject *kobj,
> > + struct bin_attribute *bin_attr,
> > + char *buf, loff_t pos, size_t size)
> > +{
> > + struct device *dev = container_of(kobj, struct device, kobj);
> > + struct cyttsp *ts = dev_get_drvdata(dev);
> > + LOCK(ts->mutex);
> > + DBG({
> > + char str[128];
> > + char *p = str;
> > + int i;
> > + for (i = 0; i < size; i++, p += 2)
> > + sprintf(p, "%02x", (unsigned char)buf[i]);
> > + printk(KERN_DEBUG "%s: size %d, pos %ld payload %s\n",
> > + __func__, size, (long)pos, str);
> > + })
> > + ttsp_write_block_data(ts, CY_REG_BASE, size, buf);
> > + UNLOCK(ts->mutex);
> > + return size;
> > +}
> > +
> > +static ssize_t firmware_read(struct kobject *kobj,
> > + struct bin_attribute *ba,
> > + char *buf, loff_t pos, size_t size)
> > +{
> > + int count = 0;
> > + struct device *dev = container_of(kobj, struct device, kobj);
> > + struct cyttsp *ts = dev_get_drvdata(dev);
> > +
> > + LOCK(ts->mutex);
> > + if (!ts->fw_loader_mode)
> > + goto exit;
> > + if (!cyttsp_load_bl_regs(ts)) {
> > + *(unsigned short *)buf = ts->bl_data.bl_status << 8 |
> > + ts->bl_data.bl_error;
> > + count = sizeof(unsigned short);
> > + } else {
> > + printk(KERN_ERR "%s: error reading status\n", __func__);
> > + count = 0;
> > + }
> > +exit:
> > + UNLOCK(ts->mutex);
> > + return count;
> > +}
>
> This kind of custom interface may not be allowed in the kernel driver.
> Please use
> request_firmware(...) call based interface to support firmware
loading.
>

Will look into.

> > +
> > +void *cyttsp_core_init(struct cyttsp_bus_ops *bus_ops, struct
device
> *pdev)
> > +{
> > + struct input_dev *input_device;
> > + struct cyttsp *ts;
> > + int retval = 0;
> > +
> > + DBG(printk(KERN_INFO"%s: Enter\n", __func__);)
> > +
> > + ts = kzalloc(sizeof(*ts), GFP_KERNEL);
> > + if (ts == NULL) {
> > + printk(KERN_ERR "%s: Error, kzalloc\n", __func__);
> > + goto error_alloc_data_failed;
> > + }
> > + mutex_init(&ts->mutex);
> > + ts->pdev = pdev;
> > + ts->platform_data = pdev->platform_data;
> > + ts->bus_ops = bus_ops;
> > +
> > + if (ts->platform_data->init)
> > + retval = ts->platform_data->init(1);
> > + if (retval) {
> > + printk(KERN_ERR "%s: platform init failed!\n",
__func__);
> > + goto error_init;
> > + }
> > +
> > + if (ts->platform_data->use_timer)
> > + ts->irq = -1;
> > + else
> > + ts->irq = gpio_to_irq(ts->platform_data->irq_gpio);
> > +
> > + retval = cyttsp_power_on(ts);
> > + if (retval < 0) {
> > + printk(KERN_ERR "%s: Error, power on failed!\n",
__func__);
> > + goto error_power_on;
> > + }
> > +
> > + /* Create the input device and register it. */
> > + input_device = input_allocate_device();
> > + if (!input_device) {
> > + retval = -ENOMEM;
> > + printk(KERN_ERR "%s: Error, failed to allocate input
> device\n",
> > + __func__);
> > + goto error_input_allocate_device;
> > + }
> > +
> > + ts->input = input_device;
> > + input_device->name = ts->platform_data->name;
> > + input_device->phys = ts->phys;
> > + input_device->dev.parent = ts->pdev;
> > + /* init the touch structures */
> > + ts->num_prv_st_tch = CY_NTCH;
> > + memset(ts->act_trk, CY_NTCH, sizeof(ts->act_trk));
> > + memset(ts->prv_mt_pos, CY_NTCH, sizeof(ts->prv_mt_pos));
> > + memset(ts->prv_mt_tch, CY_IGNR_TCH, sizeof(ts->prv_mt_tch));
> > + memset(ts->prv_st_tch, CY_IGNR_TCH, sizeof(ts->prv_st_tch));
> > +
> > + __set_bit(EV_SYN, input_device->evbit);
> > + __set_bit(EV_KEY, input_device->evbit);
> > + __set_bit(EV_ABS, input_device->evbit);
> > + __set_bit(BTN_TOUCH, input_device->keybit);
> > + __set_bit(BTN_2, input_device->keybit);
> > + if (ts->platform_data->use_gestures)
> > + __set_bit(BTN_3, input_device->keybit);
> > +
> > + input_set_abs_params(input_device, ABS_X, 0, ts->platform_data-
> >maxx,
> > + 0, 0);
> > + input_set_abs_params(input_device, ABS_Y, 0, ts->platform_data-
> >maxy,
> > + 0, 0);
> > + input_set_abs_params(input_device, ABS_TOOL_WIDTH, 0,
> > + CY_LARGE_TOOL_WIDTH, 0, 0);
> > + input_set_abs_params(input_device, ABS_PRESSURE, 0, CY_MAXZ, 0,
> 0);
> > + input_set_abs_params(input_device, ABS_HAT0X, 0,
> > + ts->platform_data->maxx, 0, 0);
> > + input_set_abs_params(input_device, ABS_HAT0Y, 0,
> > + ts->platform_data->maxy, 0, 0);
> > + if (ts->platform_data->use_gestures) {
> > + input_set_abs_params(input_device, ABS_HAT1X, 0,
CY_MAXZ,
> > + 0, 0);
> > + input_set_abs_params(input_device, ABS_HAT1Y, 0,
CY_MAXZ,
> > + 0, 0);
> > + }
> > + if (ts->platform_data->use_mt) {
> > + input_set_abs_params(input_device, ABS_MT_POSITION_X, 0,
> > + ts->platform_data->maxx, 0, 0);
> > + input_set_abs_params(input_device, ABS_MT_POSITION_Y, 0,
> > + ts->platform_data->maxy, 0, 0);
> > + input_set_abs_params(input_device, ABS_MT_TOUCH_MAJOR,
0,
> > + CY_MAXZ, 0, 0);
> > + input_set_abs_params(input_device, ABS_MT_WIDTH_MAJOR,
0,
> > + CY_LARGE_TOOL_WIDTH, 0, 0);
> > + if (ts->platform_data->use_trk_id)
> > + input_set_abs_params(input_device,
> ABS_MT_TRACKING_ID,
> > + 0, CY_NUM_TRK_ID, 0, 0);
> > + }
> > +
> > + if (ts->platform_data->use_virtual_keys)
> > + input_set_capability(input_device, EV_KEY, KEY_PROG1);
> > +
> > + retval = input_register_device(input_device);
> > + if (retval) {
> > + printk(KERN_ERR "%s: Error, failed to register input
> device\n",
> > + __func__);
> > + goto error_input_register_device;
> > + }
> > + DBG(printk(KERN_INFO "%s: Registered input device %s\n",
> > + __func__, input_device->name);)
> > +
> > + /* Prepare our worker structure prior to setting up the timer
ISR
> */
> > + INIT_WORK(&ts->work, cyttsp_xy_worker_);
> > +
> > + /* Timer or Interrupt setup */
> > + if (ts->platform_data->use_timer) {
> > + DBG(printk(KERN_INFO "%s: Setting up Timer\n",
__func__);)
> > + setup_timer(&ts->timer, cyttsp_timer, (unsigned long)
ts);
> > + mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
> > + } else {
> > + DBG(
> > + printk(KERN_INFO "%s: Setting up Interrupt. Device
> name=%s\n",
> > + __func__, input_device->name);)
> > + retval = request_threaded_irq(ts->irq, NULL, cyttsp_irq,
> > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > + input_device->name, ts);
> > +
> > + if (retval) {
> > + printk(KERN_ERR "%s: Error, could not request
irq\n",
> > + __func__);
> > + goto error_free_irq;
> > + } else {
> > + DBG(printk(KERN_INFO "%s: Interrupt=%d\n",
> > + __func__, ts->irq);)
> > + }
> > + }
> > + retval = device_create_file(pdev, &fwloader);
> > + if (retval) {
> > + printk(KERN_ERR "%s: Error, could not create
attribute\n",
> > + __func__);
> > + goto device_create_error;
> > + }
> > + dev_set_drvdata(pdev, ts);
> > + printk(KERN_INFO "%s: Successful.\n", __func__);
> > + return ts;
> > +
> > +device_create_error:
> > +error_free_irq:
> > + if (ts->irq >= 0)
> > + free_irq(ts->irq, ts);
> > + input_unregister_device(input_device);
> > +error_input_register_device:
> > + input_free_device(input_device);
> > +error_input_allocate_device:
> > +error_power_on:
> > + if (ts->platform_data->init)
> > + ts->platform_data->init(0);
> > +error_init:
> > + kfree(ts);
> > +error_alloc_data_failed:
> > + return NULL;
> > +}
> > +
> EXPORT_SYMBOL_GPL(...)?
>
> > +/* registered in driver struct */
> > +void cyttsp_core_release(void *handle)
> > +{
> > + struct cyttsp *ts = handle;
> > +
> > + DBG(printk(KERN_INFO"%s: Enter\n", __func__);)
> > + cancel_work_sync(&ts->work);
> > + if (ts->platform_data->use_timer)
> > + del_timer_sync(&ts->timer);
> > + else
> > + free_irq(ts->irq, ts);
> > + input_unregister_device(ts->input);
> > + input_free_device(ts->input);
>
> No need of input_free_device after input_unregister_device.

Will remove.

>
> > + if (ts->platform_data->init)
> > + ts->platform_data->init(0);
> > + kfree(ts);
> > +}
>
> EXPORT_SYMBOL_GPL(...)?

Will add.

>
> > +MODULE_LICENSE("GPL");
> > +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen
driver
> core");
> > +MODULE_AUTHOR("Cypress");
> > +
>
>
> > diff --git a/drivers/input/touchscreen/cyttsp_i2c.c
> b/drivers/input/touchscreen/cyttsp_i2c.c
> > new file mode 100755
> > index 0000000..ef96105
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/cyttsp_i2c.c
> > @@ -0,0 +1,183 @@
> > +/* Source for:
> > + * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen
> driver.
> > + * For use with Cypress Txx2xx and Txx3xx parts with I2C interface.
> > + * Supported parts include:
> > + * CY8CTST241
> > + * CY8CTMG240
> > + * CY8CTST341
> > + * CY8CTMA340
> > + *
> > + * Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * version 2, and only version 2, as published by the
> > + * Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public
License
> along
> > + * with this program; if not, write to the Free Software
Foundation,
> Inc.,
> > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> > + *
> > + * Contact Cypress Semiconductor at www.cypress.com
> (kev@cypress.com)
> > + *
> > + */
> > +
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/i2c.h>
> > +#include <linux/cyttsp.h>
> > +#include "cyttsp_core.h"
> > +
> > +#define DBG(x)
> > +
> > +struct cyttsp_i2c {
> > + struct cyttsp_bus_ops ops;
> > + struct i2c_client *client;
> > + void *ttsp_client;
> > +};
> > +
> > +static s32 ttsp_i2c_read_block_data(void *handle, u8 addr,
> > + u8 length, void *values)
> > +{
> > + struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c,
> ops);
> > + return i2c_smbus_read_i2c_block_data(ts->client,
> > + addr, length, values);
> > +}
> > +
> > +static s32 ttsp_i2c_write_block_data(void *handle, u8 addr,
> > + u8 length, const void *values)
> > +{
> > + struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c,
> ops);
> > + return i2c_smbus_write_i2c_block_data(ts->client,
> > + addr, length, values);
> > +}
> > +
> > +static s32 ttsp_i2c_tch_ext(void *handle, void *values)
> > +{
> > + int retval = 0;
> > + struct cyttsp_i2c *ts = container_of(handle, struct cyttsp_i2c,
> ops);
> > +
> > + DBG(printk(KERN_INFO "%s: Enter\n", __func__);)
> > +
> > + /* Add custom touch extension handling code here */
> > + /* set: retval < 0 for any returned system errors,
> > + retval = 0 if normal touch handling is required,
> > + retval > 0 if normal touch handling is *not* required */
> > + if (!ts || !values)
> > + retval = -EIO;
> > +
> > + return retval;
> > +}
> > +static int __devinit cyttsp_i2c_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + struct cyttsp_i2c *ts;
> > + int retval;
> > +
> > + DBG(printk(KERN_INFO"%s: Enter\n", __func__);)
> > +
> > + if (!i2c_check_functionality(client->adapter,
> > + I2C_FUNC_SMBUS_READ_WORD_DATA))
> > + return -EIO;
> > +
> > + /* allocate and clear memory */
> > + ts = kzalloc(sizeof(*ts), GFP_KERNEL);
> > + if (ts == NULL) {
> > + printk(KERN_ERR "%s: Error, kzalloc.\n", __func__);
> > + retval = -ENOMEM;
> > + goto error_alloc_data_failed;
> > + }
> > +
> > + /* register driver_data */
> > + ts->client = client;
> > + i2c_set_clientdata(client, ts);
> > + ts->ops.write = ttsp_i2c_write_block_data;
> > + ts->ops.read = ttsp_i2c_read_block_data;
> > + ts->ops.ext = ttsp_i2c_tch_ext;
> > +
> > + ts->ttsp_client = cyttsp_core_init(&ts->ops, &client->dev);
> > + if (!ts->ttsp_client)
> > + goto ttsp_core_err;
> > +
> > + printk(KERN_INFO "%s: Successful registration %s\n",
> > + __func__, CY_I2C_NAME);
> > + return 0;
> > +
> > +ttsp_core_err:
> > + kfree(ts);
> > +error_alloc_data_failed:
> > + return retval;
> > +}
> > +
> > +
> > +/* registered in driver struct */
> > +static int __devexit cyttsp_i2c_remove(struct i2c_client *client)
> > +{
> > + struct cyttsp_i2c *ts;
> > +
> > + DBG(printk(KERN_INFO"%s: Enter\n", __func__);)
> > + ts = i2c_get_clientdata(client);
> > + cyttsp_core_release(ts->ttsp_client);
> > + kfree(ts);
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM
> > +static int cyttsp_i2c_suspend(struct i2c_client *client,
> pm_message_t message)
> > +{
> > + return cyttsp_suspend(dev_get_drvdata(&client->dev));
> > +}
> > +
> > +static int cyttsp_i2c_resume(struct i2c_client *client)
> > +{
> > + return cyttsp_resume(dev_get_drvdata(&client->dev));
> > +}
> > +#endif
> > +
> > +static const struct i2c_device_id cyttsp_i2c_id[] = {
> > + { CY_I2C_NAME, 0 }, { }
> > +};
> > +
> > +static struct i2c_driver cyttsp_i2c_driver = {
> > + .driver = {
> > + .name = CY_I2C_NAME,
> > + .owner = THIS_MODULE,
> > + },
> > + .probe = cyttsp_i2c_probe,
> > + .remove = __devexit_p(cyttsp_i2c_remove),
> > + .id_table = cyttsp_i2c_id,
> > +#ifdef CONFIG_PM
> > + .suspend = cyttsp_i2c_suspend,
> > + .resume = cyttsp_i2c_resume,
> > +#endif
> > +};
> > +
> > +static int cyttsp_i2c_init(void)
> > +{

> Please add __init like
>
> static int __init cyttsp_i2c_init(void)

Will add.

>
> > + int retval;
> > + retval = i2c_add_driver(&cyttsp_i2c_driver);
> > + printk(KERN_INFO "%s: Cypress TrueTouch(R) Standard Product I2C
"
> > + "Touchscreen Driver (Built %s @ %s) returned %d\n",
> > + __func__, __DATE__, __TIME__, retval);
> > +
> > + return retval;
> > +}
> > +
> > +static void cyttsp_i2c_exit(void)
>
> __exit
>

Will add.

> > +{
> > + return i2c_del_driver(&cyttsp_i2c_driver);
> > +}
> > +
> > +module_init(cyttsp_i2c_init);
> > +module_exit(cyttsp_i2c_exit);
> > +
> > +MODULE_ALIAS("i2c:cyttsp");
> > +MODULE_LICENSE("GPL");
> > +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP)
I2C
> driver");
> > +MODULE_AUTHOR("Cypress");
> > +MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id);
> > diff --git a/drivers/input/touchscreen/cyttsp_spi.c
> b/drivers/input/touchscreen/cyttsp_spi.c
> > new file mode 100755
> > index 0000000..cb6432a
> > --- /dev/null
> > +++ b/drivers/input/touchscreen/cyttsp_spi.c
>
> I will comment on spi driver interface later.

Thank you for your review Trilok.
-kev

>
> ---Trilok Soni
>
> --
> Sent by a consultant of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> Forum.

---------------------------------------------------------------
This message and any attachments may contain Cypress (or its
subsidiaries) confidential information. If it has been received
in error, please advise the sender and immediately delete this
message.
---------------------------------------------------------------


\
 
 \ /
  Last update: 2010-08-07 02:59    [W:0.123 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site