lkml.org 
[lkml]   [2010]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] GSoC 2010 - Memory hotplug support for Xen guests - second fully working version - once again
  On 08/06/2010 04:11 AM, Daniel Kiper wrote:
> Hi,
>
> I am sending this e-mail once again because it probably
> has been lost in abyss of Xen-devel/LKLM list.
>
> Here is the second version of memory hotplug support
> for Xen guests patch. This one cleanly applies to
> git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> repository, xen/memory-hotplug head.
>
> Changes:
> - /sys/devices/system/memory/probe interface has been removed;
> /sys/devices/system/xen_memory/xen_memory0/{target,target_kb}
> are much better (I forgot about them),
> - most of the code have been moved to drivers/xen/balloon.c,
> - this changes forced me to export hotadd_new_pgdat and
> rollback_node_hotadd function from mm/memory_hotplug.c;
> could it be accepted by mm/memory_hotplug.c maintainers ???

Likely, depending on how they're used. If you're using them as a
sensible API (which looks like the case) then there should be no problem.

> - PV on HVM mode is supported now; it was tested on
> git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git
> repository, 2.6.34-pvhvm head,

Good. I noticed you have some specific tests for "xen_pv_domain()" -
are there many differences between pv and hvm?

> - most of Jeremy suggestions have been applied.

OK. Thanks for posting a delta against your previous patch; it makes it
much easier to see what changes you've made.

>>> +#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
>>> +static inline unsigned long current_target(void)
>>> +{
>>> + return balloon_stats.target_pages;
>> Why does this need its own version?
> Because original version return values not bigger
> then initial memory allocation which does not allow
> memory hotplug to function.

But surely they can be combined? A system without
XEN_BALLOON_MEMORY_HOTPLUG is identical to a system with
XEN_BALLOON_MEMORY_HOTPLUG which hasn't yet added any memory. Some
variables may become constants (because memory can never be hot-added),
but the logic of the code should be the same.

>>> +int __ref xen_add_memory(int nid, u64 start, u64 size)
>>> +{
>>> + pg_data_t *pgdat = NULL;
>>> + int new_pgdat = 0, ret;
>>> +
>>> + lock_system_sleep();
>>> +
>>> + if (!node_online(nid)) {
>>> + pgdat = hotadd_new_pgdat(nid, start);
>>> + ret = -ENOMEM;
>>> + if (!pgdat)
>>> + goto out;
>>> + new_pgdat = 1;
>>> + }
>>> +
>>> + /* call arch's memory hotadd */
>>> + ret = arch_add_memory(nid, start, size);
>>> +
>>> + if (ret< 0)
>>> + goto error;
>>> +
>>> + /* we online node here. we can't roll back from here. */
>>> + node_set_online(nid);
>>> +
>>> + if (new_pgdat) {
>>> + ret = register_one_node(nid);
>>> + /*
>>> + * If sysfs file of new node can't create, cpu on the node
>>> + * can't be hot-added. There is no rollback way now.
>>> + * So, check by BUG_ON() to catch it reluctantly..
>>> + */
>>> + BUG_ON(ret);
>>> + }
>> This doesn't seem to be doing anything particularly xen-specific.
> In general it could be generic however I do not know
> it will be useful for others. If this function would
> be accepted by mm/memory_hotplug.c maintainers we could
> move it there. I removed from original add_memory funtion
> resource allocation (and deallocation after error), which
> must be done before XENMEM_populate_physmap in Xen. xen_add_memory
> is called after physmap is fully populated.

OK, see below. I think you can pull all the common code out into a
separate function rather than duplicating it.

> If you have a questions please drop me a line.

Overall, this looks much better. The next step is to split this into at
least two patches: one for the core code, and one for the Xen bits.
Each patch should do just one logical operation, so if you have several
distinct changes to the core code, put them in separate patches.

More comments inline.

> Daniel
>
> Signed-off-by: Daniel Kiper<dkiper@net-space.pl>
> ---
> arch/x86/Kconfig | 2 +-
> drivers/base/memory.c | 23 ---
> drivers/xen/Kconfig | 2 +-
> drivers/xen/balloon.c | 416 ++++++++++++++++++++++------------------
> include/linux/memory_hotplug.h | 10 +-
> include/xen/balloon.h | 6 -
> mm/Kconfig | 9 -
> mm/memory_hotplug.c | 146 +--------------
> 8 files changed, 240 insertions(+), 374 deletions(-)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 38434da..beb1aa7 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -1273,7 +1273,7 @@ config ARCH_SELECT_MEMORY_MODEL
> depends on ARCH_SPARSEMEM_ENABLE
>
> config ARCH_MEMORY_PROBE
> - def_bool y
> + def_bool X86_64&& !XEN
> depends on MEMORY_HOTPLUG

The trouble with making anything statically depend on Xen at config time
is that you lose it even if you're not running under Xen. A pvops
kernel can run on bare hardware as well, and we don't want to lose
functionality (assume that CONFIG_XEN is always set, since distros do
always set it).

Can you find a clean way to prevent/disable ARCH_MEMORY_PROBE at runtime
when in a Xen context?

> config ILLEGAL_POINTER_VALUE
> diff --git a/drivers/base/memory.c b/drivers/base/memory.c
> index 709457b..933442f 100644
> --- a/drivers/base/memory.c
> +++ b/drivers/base/memory.c
> @@ -27,14 +27,6 @@
> #include<asm/atomic.h>
> #include<asm/uaccess.h>
>
> -#ifdef CONFIG_XEN_MEMORY_HOTPLUG
> -#include<xen/xen.h>
> -#endif
> -
> -#if defined(CONFIG_XEN_MEMORY_HOTPLUG)&& defined(CONFIG_XEN_BALLOON)
> -#include<xen/balloon.h>
> -#endif
> -
> #define MEMORY_CLASS_NAME "memory"
>
> static struct sysdev_class memory_sysdev_class = {
> @@ -223,10 +215,6 @@ memory_block_action(struct memory_block *mem, unsigned long action)
> case MEM_ONLINE:
> start_pfn = page_to_pfn(first_page);
> ret = online_pages(start_pfn, PAGES_PER_SECTION);
> -#if defined(CONFIG_XEN_MEMORY_HOTPLUG)&& defined(CONFIG_XEN_BALLOON)
> - if (xen_domain()&& !ret)
> - balloon_update_stats(PAGES_PER_SECTION);
> -#endif
> break;
> case MEM_OFFLINE:
> mem->state = MEM_GOING_OFFLINE;
> @@ -237,10 +225,6 @@ memory_block_action(struct memory_block *mem, unsigned long action)
> mem->state = old_state;
> break;
> }
> -#if defined(CONFIG_XEN_MEMORY_HOTPLUG)&& defined(CONFIG_XEN_BALLOON)
> - if (xen_domain())
> - balloon_update_stats(-PAGES_PER_SECTION);
> -#endif
> break;
> default:
> WARN(1, KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
> @@ -357,13 +341,6 @@ memory_probe_store(struct class *class, struct class_attribute *attr,
>
> phys_addr = simple_strtoull(buf, NULL, 0);
>
> -#ifdef CONFIG_XEN_MEMORY_HOTPLUG
> - if (xen_domain()) {
> - ret = xen_memory_probe(phys_addr);
> - return ret ? ret : count;
> - }
> -#endif
> -
> nid = memory_add_physaddr_to_nid(phys_addr);
> ret = add_memory(nid, phys_addr, PAGES_PER_SECTION<< PAGE_SHIFT);
>
> diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
> index 9713048..4f35eaf 100644
> --- a/drivers/xen/Kconfig
> +++ b/drivers/xen/Kconfig
> @@ -11,8 +11,8 @@ config XEN_BALLOON
>
> config XEN_BALLOON_MEMORY_HOTPLUG
> bool "Xen memory balloon driver with memory hotplug support"
> - depends on EXPERIMENTAL&& XEN_BALLOON&& MEMORY_HOTPLUG
> default n
> + depends on XEN_BALLOON&& MEMORY_HOTPLUG
> help
> Xen memory balloon driver with memory hotplug support allows expanding
> memory available for the system above limit declared at system startup.
> diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
> index f80bba0..31edc26 100644
> --- a/drivers/xen/balloon.c
> +++ b/drivers/xen/balloon.c
> @@ -45,6 +45,8 @@
> #include<linux/list.h>
> #include<linux/sysdev.h>
> #include<linux/gfp.h>
> +#include<linux/memory.h>
> +#include<linux/suspend.h>
>
> #include<asm/page.h>
> #include<asm/pgalloc.h>
> @@ -62,10 +64,6 @@
> #include<xen/features.h>
> #include<xen/page.h>
>
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> -#include<linux/memory.h>
> -#endif
> -
> #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
>
> #define BALLOON_CLASS_NAME "xen_memory"
> @@ -199,6 +197,196 @@ static inline unsigned long current_target(void)
> {
> return balloon_stats.target_pages;
> }
> +
> +static inline u64 is_memory_resource_reserved(void)
> +{
> + return balloon_stats.hotplug_start_paddr;
> +}
> +
> +/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
> +static int __ref xen_add_memory(int nid, u64 start, u64 size)

Could this be __meminit too then?

> +{
> + pg_data_t *pgdat = NULL;
> + int new_pgdat = 0, ret;
> +
> + lock_system_sleep();

What's this for? I see all its other users are in the memory hotplug
code, but presumably they're concerned about a real S3 suspend. Do we
care about that here?

> +
> + if (!node_online(nid)) {
> + pgdat = hotadd_new_pgdat(nid, start);
> + ret = -ENOMEM;
> + if (!pgdat)
> + goto out;
> + new_pgdat = 1;
> + }
> +
> + /* call arch's memory hotadd */
> + ret = arch_add_memory(nid, start, size);
> +
> + if (ret< 0)
> + goto error;
> +
> + /* we online node here. we can't roll back from here. */
> + node_set_online(nid);
> +
> + if (new_pgdat) {
> + ret = register_one_node(nid);
> + /*
> + * If sysfs file of new node can't create, cpu on the node
> + * can't be hot-added. There is no rollback way now.
> + * So, check by BUG_ON() to catch it reluctantly..
> + */
> + BUG_ON(ret);
> + }
> +
> + goto out;
> +
> +error:
> + /* rollback pgdat allocation */
> + if (new_pgdat)
> + rollback_node_hotadd(nid, pgdat);
> +
> +out:
> + unlock_system_sleep();
> + return ret;

Actually, this is nearly identical to mm/memory_hotplug.c:add_memory().
It looks to me like you should:

* pull the common core out into mm/memory_hotplug.c:__add_memory()
(or a better name)
* make add_memory() do its
register_memory_resource()/firmware_map_add_hotplug() around that
(assuming they're definitely unwanted in the Xen case)
* make xen_add_memory() just call __add_memory() along with whatever
else it needs (which is nothing?)

That way you can export a high-level __add_memory function from
memory_hotplug.c rather than the two internal detail functions.

> +}
> +
> +static int allocate_additional_memory(unsigned long nr_pages)
> +{
> + long rc;
> + resource_size_t r_min, r_size;
> + struct resource *r;
> + struct xen_memory_reservation reservation = {
> + .address_bits = 0,
> + .extent_order = 0,
> + .domid = DOMID_SELF
> + };
> + unsigned long flags, i, pfn;
> +
> + if (nr_pages> ARRAY_SIZE(frame_list))
> + nr_pages = ARRAY_SIZE(frame_list);
> +
> + spin_lock_irqsave(&balloon_lock, flags);
> +
> + if (!is_memory_resource_reserved()) {
> +
> + /*
> + * Look for first unused memory region starting at page
> + * boundary. Skip last memory section created at boot time
> + * becuase it may contains unused memory pages with PG_reserved
> + * bit not set (online_pages require PG_reserved bit set).
> + */
> +
> + r = kzalloc(sizeof(struct resource), GFP_KERNEL);
> +
> + if (!r) {
> + rc = -ENOMEM;
> + goto out;
> + }
> +
> + r->name = "System RAM";

How about making it clear its Xen hotplug RAM? Or do things care about
the "System RAM" name?

> + r->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
> + r_min = PFN_PHYS(section_nr_to_pfn(pfn_to_section_nr(balloon_stats.boot_max_pfn) + 1));
> + r_size = (balloon_stats.target_pages - balloon_stats.current_pages)<< PAGE_SHIFT;
> +
> + rc = allocate_resource(&iomem_resource, r, r_size, r_min,
> + ULONG_MAX, PAGE_SIZE, NULL, NULL);
> +
> + if (rc< 0) {
> + kfree(r);
> + goto out;
> + }
> +
> + balloon_stats.hotplug_start_paddr = r->start;
> + }
> +
> + pfn = PFN_DOWN(balloon_stats.hotplug_start_paddr + balloon_stats.hotplug_size);
> +
> + for (i = 0; i< nr_pages; ++i, ++pfn)
> + frame_list[i] = pfn;
> +
> + set_xen_guest_handle(reservation.extent_start, frame_list);
> + reservation.nr_extents = nr_pages;
> +
> + rc = HYPERVISOR_memory_op(XENMEM_populate_physmap,&reservation);
> +
> + if (rc< 0)
> + goto out;
> +
> + pfn = PFN_DOWN(balloon_stats.hotplug_start_paddr + balloon_stats.hotplug_size);
> +
> + for (i = 0; i< rc; ++i, ++pfn) {
> + BUG_ON(!xen_feature(XENFEAT_auto_translated_physmap)&&
> + phys_to_machine_mapping_valid(pfn));
> + set_phys_to_machine(pfn, frame_list[i]);
> + }
> +
> + balloon_stats.hotplug_size += rc<< PAGE_SHIFT;
> + balloon_stats.current_pages += rc;
> +
> +out:
> + spin_unlock_irqrestore(&balloon_lock, flags);
> +
> + return rc< 0 ? rc : rc != nr_pages;
> +}
> +
> +static void hotplug_allocated_memory(void)
> +{
> + int nid, ret;
> + struct memory_block *mem;
> + unsigned long pfn, pfn_limit;
> +
> + nid = memory_add_physaddr_to_nid(balloon_stats.hotplug_start_paddr);
> +
> + ret = xen_add_memory(nid, balloon_stats.hotplug_start_paddr,
> + balloon_stats.hotplug_size);
> +
> + if (ret) {
> + pr_err("%s: xen_add_memory: Memory hotplug failed: %i\n",
> + __func__, ret);
> + goto error;
> + }
> +
> + if (xen_pv_domain()) {
> + pfn = PFN_DOWN(balloon_stats.hotplug_start_paddr);
> + pfn_limit = pfn + (balloon_stats.hotplug_size>> PAGE_SHIFT);
> +
> + for (; pfn< pfn_limit; ++pfn)
> + if (!PageHighMem(pfn_to_page(pfn)))
> + BUG_ON(HYPERVISOR_update_va_mapping(
> + (unsigned long)__va(pfn<< PAGE_SHIFT),
> + mfn_pte(pfn_to_mfn(pfn), PAGE_KERNEL), 0));
> + }
> +
> + ret = online_pages(PFN_DOWN(balloon_stats.hotplug_start_paddr),
> + balloon_stats.hotplug_size>> PAGE_SHIFT);
> +
> + if (ret) {
> + pr_err("%s: online_pages: Failed: %i\n", __func__, ret);
> + goto error;
> + }
> +
> + pfn = PFN_DOWN(balloon_stats.hotplug_start_paddr);
> + pfn_limit = pfn + (balloon_stats.hotplug_size>> PAGE_SHIFT);
> +
> + for (; pfn< pfn_limit; pfn += PAGES_PER_SECTION) {
> + mem = find_memory_block(__pfn_to_section(pfn));
> + BUG_ON(!mem);
> + BUG_ON(!present_section_nr(mem->phys_index));
> + mutex_lock(&mem->state_mutex);
> + mem->state = MEM_ONLINE;
> + mutex_unlock(&mem->state_mutex);
> + }
> +
> + goto out;
> +
> +error:
> + balloon_stats.current_pages -= balloon_stats.hotplug_size>> PAGE_SHIFT;
> + balloon_stats.target_pages -= balloon_stats.hotplug_size>> PAGE_SHIFT;
> +
> +out:
> + balloon_stats.hotplug_start_paddr = 0;
> + balloon_stats.hotplug_size = 0;
> +}
> #else
> static unsigned long current_target(void)
> {
> @@ -211,12 +399,26 @@ static unsigned long current_target(void)
>
> return target;
> }
> +
> +static inline u64 is_memory_resource_reserved(void)
> +{
> + return 0;
> +}
> +
> +static inline int allocate_additional_memory(unsigned long nr_pages)
> +{
> + return 0;
> +}
> +
> +static inline void hotplug_allocated_memory(void)
> +{
> +}
> #endif
>
> static int increase_reservation(unsigned long nr_pages)
> {
> - unsigned long uninitialized_var(pfn), i, flags;
> - struct page *uninitialized_var(page);
> + unsigned long pfn, i, flags;
> + struct page *page;
> long rc;
> struct xen_memory_reservation reservation = {
> .address_bits = 0,
> @@ -224,63 +426,11 @@ static int increase_reservation(unsigned long nr_pages)
> .domid = DOMID_SELF
> };
>
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> - resource_size_t r_min, r_size;
> - struct resource *r;
> -#endif
> -
> if (nr_pages> ARRAY_SIZE(frame_list))
> nr_pages = ARRAY_SIZE(frame_list);
>
> spin_lock_irqsave(&balloon_lock, flags);
>
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> - if (!balloon_stats.balloon_low&& !balloon_stats.balloon_high) {
> - if (!balloon_stats.hotplug_start_paddr) {
> -
> - /*
> - * Look for first unused memory region starting
> - * at page boundary. Skip last memory section created
> - * at boot time becuase it may contains unused memory
> - * pages with PG_reserved bit not set (online_pages
> - * require PG_reserved bit set).
> - */
> -
> - r = kzalloc(sizeof(struct resource), GFP_KERNEL);
> -
> - if (!r) {
> - rc = -ENOMEM;
> - goto out;
> - }
> -
> - r->name = "System RAM";
> - r->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
> - r_min = PFN_PHYS(section_nr_to_pfn(pfn_to_section_nr(balloon_stats.boot_max_pfn) + 1));
> - r_size = (balloon_stats.target_pages - balloon_stats.current_pages)<< PAGE_SHIFT;
> -
> - rc = allocate_resource(&iomem_resource, r,
> - r_size, r_min, ULONG_MAX,
> - PAGE_SIZE, NULL, NULL);
> -
> - if (rc< 0) {
> - kfree(r);
> - goto out;
> - }
> -
> - balloon_stats.hotplug_start_paddr = r->start;
> - }
> -
> - pfn = PFN_DOWN(balloon_stats.hotplug_start_paddr +
> - balloon_stats.hotplug_size);
> -
> - for (i = 0; i< nr_pages; ++i, ++pfn)
> - frame_list[i] = pfn;
> -
> - pfn -= nr_pages + 1;
> - goto populate_physmap;
> - }
> -#endif
> -
> page = balloon_first_page();
> for (i = 0; i< nr_pages; i++) {
> BUG_ON(page == NULL);
> @@ -288,9 +438,6 @@ static int increase_reservation(unsigned long nr_pages)
> page = balloon_next_page(page);
> }
>
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> -populate_physmap:
> -#endif
> set_xen_guest_handle(reservation.extent_start, frame_list);
> reservation.nr_extents = nr_pages;
> rc = HYPERVISOR_memory_op(XENMEM_populate_physmap,&reservation);
> @@ -298,33 +445,17 @@ populate_physmap:
> goto out;
>
> for (i = 0; i< rc; i++) {
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> - if (balloon_stats.hotplug_start_paddr) {
> - ++pfn;
> - goto set_p2m;
> - }
> -#endif
> -
> page = balloon_retrieve();
> BUG_ON(page == NULL);
>
> pfn = page_to_pfn(page);
> -
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> -set_p2m:
> -#endif
> BUG_ON(!xen_feature(XENFEAT_auto_translated_physmap)&&
> phys_to_machine_mapping_valid(pfn));
>
> set_phys_to_machine(pfn, frame_list[i]);
>
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> - if (balloon_stats.hotplug_start_paddr)
> - continue;
> -#endif
> -
> /* Link back into the page tables if not highmem. */
> - if (!PageHighMem(page)) {
> + if (xen_pv_domain()&& !PageHighMem(page)) {
> int ret;
> ret = HYPERVISOR_update_va_mapping(
> (unsigned long)__va(pfn<< PAGE_SHIFT),
> @@ -339,11 +470,6 @@ set_p2m:
> __free_page(page);
> }
>
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> - if (balloon_stats.hotplug_start_paddr)
> - balloon_stats.hotplug_size += rc<< PAGE_SHIFT;
> -#endif
> -
> balloon_stats.current_pages += rc;
>
> out:
> @@ -379,7 +505,7 @@ static int decrease_reservation(unsigned long nr_pages)
>
> scrub_page(page);
>
> - if (!PageHighMem(page)) {
> + if (xen_pv_domain()&& !PageHighMem(page)) {
> ret = HYPERVISOR_update_va_mapping(
> (unsigned long)__va(pfn<< PAGE_SHIFT),
> __pte_ma(0), 0);
> @@ -424,18 +550,18 @@ static void balloon_process(struct work_struct *work)
> int need_sleep = 0;
> long credit;
>
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> - int nid, ret;
> - struct memory_block *mem;
> - unsigned long pfn, pfn_limit;
> -#endif
> -
> mutex_lock(&balloon_mutex);
>
> do {
> credit = current_target() - balloon_stats.current_pages;
> - if (credit> 0)
> - need_sleep = (increase_reservation(credit) != 0);
> +
> + if (credit> 0) {
> + if (balloon_stats.balloon_low || balloon_stats.balloon_high)
> + need_sleep = (increase_reservation(credit) != 0);
> + else
> + need_sleep = (allocate_additional_memory(credit) != 0);
> + }
> +
> if (credit< 0)
> need_sleep = (decrease_reservation(-credit) != 0);
>
> @@ -448,93 +574,12 @@ static void balloon_process(struct work_struct *work)
> /* Schedule more work if there is some still to be done. */
> if (current_target() != balloon_stats.current_pages)
> mod_timer(&balloon_timer, jiffies + HZ);
> -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
> - else if (balloon_stats.hotplug_start_paddr) {
> - nid = memory_add_physaddr_to_nid(balloon_stats.hotplug_start_paddr);
> -
> - ret = xen_add_memory(nid, balloon_stats.hotplug_start_paddr,
> - balloon_stats.hotplug_size);
> -
> - if (ret) {
> - printk(KERN_ERR "%s: xen_add_memory: "
> - "Memory hotplug failed: %i\n",
> - __func__, ret);
> - goto error;
> - }
> -
> - pfn = PFN_DOWN(balloon_stats.hotplug_start_paddr);
> - pfn_limit = pfn + (balloon_stats.hotplug_size>> PAGE_SHIFT);
> -
> - for (; pfn< pfn_limit; ++pfn)
> - if (!PageHighMem(pfn_to_page(pfn)))
> - BUG_ON(HYPERVISOR_update_va_mapping(
> - (unsigned long)__va(pfn<< PAGE_SHIFT),
> - mfn_pte(pfn_to_mfn(pfn), PAGE_KERNEL), 0));
> -
> - ret = online_pages(PFN_DOWN(balloon_stats.hotplug_start_paddr),
> - balloon_stats.hotplug_size>> PAGE_SHIFT);
> -
> - if (ret) {
> - printk(KERN_ERR "%s: online_pages: Failed: %i\n",
> - __func__, ret);
> - goto error;
> - }
> -
> - pfn = PFN_DOWN(balloon_stats.hotplug_start_paddr);
> - pfn_limit = pfn + (balloon_stats.hotplug_size>> PAGE_SHIFT);
> -
> - for (; pfn< pfn_limit; pfn += PAGES_PER_SECTION) {
> - mem = find_memory_block(__pfn_to_section(pfn));
> - BUG_ON(!mem);
> - BUG_ON(!present_section_nr(mem->phys_index));
> - mutex_lock(&mem->state_mutex);
> - mem->state = MEM_ONLINE;
> - mutex_unlock(&mem->state_mutex);
> - }
> -
> - goto out;
> -
> -error:
> - balloon_stats.current_pages -= balloon_stats.hotplug_size>> PAGE_SHIFT;
> - balloon_stats.target_pages -= balloon_stats.hotplug_size>> PAGE_SHIFT;
> -
> -out:
> - balloon_stats.hotplug_start_paddr = 0;
> - balloon_stats.hotplug_size = 0;
> - }
> -#endif
> + else if (is_memory_resource_reserved())
> + hotplug_allocated_memory();
>
> mutex_unlock(&balloon_mutex);
> }
>
> -#ifdef CONFIG_XEN_MEMORY_HOTPLUG
> -
> -/* Resets the Xen limit, sets new target, and kicks off processing. */
> -static void balloon_set_new_target(unsigned long target)
> -{
> - mutex_lock(&balloon_mutex);
> - balloon_stats.target_pages = target;
> - mutex_unlock(&balloon_mutex);
> -
> - schedule_work(&balloon_worker);
> -}
> -
> -void balloon_update_stats(long nr_pages)
> -{
> - mutex_lock(&balloon_mutex);
> -
> - balloon_stats.current_pages += nr_pages;
> - balloon_stats.target_pages += nr_pages;
> -
> - xenbus_printf(XBT_NIL, "memory", "target", "%llu",
> - (unsigned long long)balloon_stats.target_pages<< (PAGE_SHIFT - 10));
> -
> - mutex_unlock(&balloon_mutex);
> -}
> -EXPORT_SYMBOL_GPL(balloon_update_stats);
> -
> -#else
> -
> /* Resets the Xen limit, sets new target, and kicks off processing. */
> static void balloon_set_new_target(unsigned long target)
> {
> @@ -543,8 +588,6 @@ static void balloon_set_new_target(unsigned long target)
> schedule_work(&balloon_worker);
> }
>
> -#endif
> -
> static struct xenbus_watch target_watch =
> {
> .node = "memory/target"
> @@ -589,12 +632,16 @@ static int __init balloon_init(void)
> unsigned long pfn;
> struct page *page;
>
> - if (!xen_pv_domain())
> + if (!xen_domain())
> return -ENODEV;
>
> pr_info("xen_balloon: Initialising balloon driver.\n");
>
> - balloon_stats.current_pages = min(xen_start_info->nr_pages, max_pfn);
> + if (xen_pv_domain())
> + balloon_stats.current_pages = min(xen_start_info->nr_pages, max_pfn);
> + else
> + balloon_stats.current_pages = max_pfn;
> +
> balloon_stats.target_pages = balloon_stats.current_pages;
> balloon_stats.balloon_low = 0;
> balloon_stats.balloon_high = 0;
> @@ -613,11 +660,12 @@ static int __init balloon_init(void)
> register_balloon(&balloon_sysdev);
>
> /* Initialise the balloon with excess memory space. */
> - for (pfn = xen_start_info->nr_pages; pfn< max_pfn; pfn++) {
> - page = pfn_to_page(pfn);
> - if (!PageReserved(page))
> - balloon_append(page);
> - }
> + if (xen_pv_domain())
> + for (pfn = xen_start_info->nr_pages; pfn< max_pfn; pfn++) {
> + page = pfn_to_page(pfn);
> + if (!PageReserved(page))
> + balloon_append(page);
> + }
>
> target_watch.callback = watch_target;
> xenstore_notifier.notifier_call = balloon_init_watcher;
> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> index 04e67b8..6652eae 100644
> --- a/include/linux/memory_hotplug.h
> +++ b/include/linux/memory_hotplug.h
> @@ -202,6 +202,8 @@ static inline int is_mem_section_removable(unsigned long pfn,
> }
> #endif /* CONFIG_MEMORY_HOTREMOVE */
>
> +extern pg_data_t *hotadd_new_pgdat(int nid, u64 start);
> +extern void rollback_node_hotadd(int nid, pg_data_t *pgdat);
> extern int add_memory(int nid, u64 start, u64 size);
> extern int arch_add_memory(int nid, u64 start, u64 size);
> extern int remove_memory(u64 start, u64 size);
> @@ -211,12 +213,4 @@ extern void sparse_remove_one_section(struct zone *zone, struct mem_section *ms)
> extern struct page *sparse_decode_mem_map(unsigned long coded_mem_map,
> unsigned long pnum);
>
> -#if defined(CONFIG_XEN_MEMORY_HOTPLUG) || defined(CONFIG_XEN_BALLOON_MEMORY_HOTPLUG)
> -extern int xen_add_memory(int nid, u64 start, u64 size);
> -#endif
> -
> -#ifdef CONFIG_XEN_MEMORY_HOTPLUG
> -extern int xen_memory_probe(u64 phys_addr);
> -#endif
> -
> #endif /* __LINUX_MEMORY_HOTPLUG_H */
> diff --git a/include/xen/balloon.h b/include/xen/balloon.h
> deleted file mode 100644
> index 84b17b7..0000000
> --- a/include/xen/balloon.h
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#ifndef _XEN_BALLOON_H
> -#define _XEN_BALLOON_H
> -
> -extern void balloon_update_stats(long nr_pages);
> -
> -#endif /* _XEN_BALLOON_H */
> diff --git a/mm/Kconfig b/mm/Kconfig
> index b04f3a8..9c61158 100644
> --- a/mm/Kconfig
> +++ b/mm/Kconfig
> @@ -144,15 +144,6 @@ config MEMORY_HOTREMOVE
> depends on MEMORY_HOTPLUG&& ARCH_ENABLE_MEMORY_HOTREMOVE
> depends on MIGRATION
>
> -config XEN_MEMORY_HOTPLUG
> - bool "Allow for memory hot-add in Xen guests"
> - depends on EXPERIMENTAL&& ARCH_MEMORY_PROBE&& XEN
> - default n
> - help
> - Memory hotplug allows expanding memory available for the system
> - above limit declared at system startup. It is very useful on critical
> - systems which require long run without rebooting.
> -
> #
> # If we have space for more page flags then we can enable additional
> # optimizations and functionality.
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 1c73703..143e03c 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -32,14 +32,6 @@
>
> #include<asm/tlbflush.h>
>
> -#ifdef CONFIG_XEN_MEMORY_HOTPLUG
> -#include<asm/xen/hypercall.h>
> -#include<xen/interface/xen.h>
> -#include<xen/interface/memory.h>
> -#include<xen/features.h>
> -#include<xen/page.h>
> -#endif
> -
> #include "internal.h"
>
> /* add this memory to iomem resource */
> @@ -461,7 +453,7 @@ int online_pages(unsigned long pfn, unsigned long nr_pages)
> #endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
>
> /* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
> -static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
> +pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
> {
> struct pglist_data *pgdat;
> unsigned long zones_size[MAX_NR_ZONES] = {0};
> @@ -481,13 +473,15 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
>
> return pgdat;
> }
> +EXPORT_SYMBOL_GPL(hotadd_new_pgdat);
>
> -static void rollback_node_hotadd(int nid, pg_data_t *pgdat)
> +void rollback_node_hotadd(int nid, pg_data_t *pgdat)
> {
> arch_refresh_nodedata(nid, NULL);
> arch_free_nodedata(pgdat);
> return;
> }
> +EXPORT_SYMBOL_GPL(rollback_node_hotadd);
>
>
> /* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
> @@ -550,138 +544,6 @@ out:
> }
> EXPORT_SYMBOL_GPL(add_memory);
>
> -#if defined(CONFIG_XEN_MEMORY_HOTPLUG) || defined(CONFIG_XEN_BALLOON_MEMORY_HOTPLUG)
> -/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
> -int __ref xen_add_memory(int nid, u64 start, u64 size)
> -{
> - pg_data_t *pgdat = NULL;
> - int new_pgdat = 0, ret;
> -
> - lock_system_sleep();
> -
> - if (!node_online(nid)) {
> - pgdat = hotadd_new_pgdat(nid, start);
> - ret = -ENOMEM;
> - if (!pgdat)
> - goto out;
> - new_pgdat = 1;
> - }
> -
> - /* call arch's memory hotadd */
> - ret = arch_add_memory(nid, start, size);
> -
> - if (ret< 0)
> - goto error;
> -
> - /* we online node here. we can't roll back from here. */
> - node_set_online(nid);
> -
> - if (new_pgdat) {
> - ret = register_one_node(nid);
> - /*
> - * If sysfs file of new node can't create, cpu on the node
> - * can't be hot-added. There is no rollback way now.
> - * So, check by BUG_ON() to catch it reluctantly..
> - */
> - BUG_ON(ret);
> - }
> -
> - goto out;
> -
> -error:
> - /* rollback pgdat allocation */
> - if (new_pgdat)
> - rollback_node_hotadd(nid, pgdat);
> -
> -out:
> - unlock_system_sleep();
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(xen_add_memory);
> -#endif
> -
> -#ifdef CONFIG_XEN_MEMORY_HOTPLUG
> -int xen_memory_probe(u64 phys_addr)
> -{
> - int nr_pages, ret;
> - struct resource *r;
> - struct xen_memory_reservation reservation = {
> - .address_bits = 0,
> - .extent_order = 0,
> - .domid = DOMID_SELF,
> - .nr_extents = PAGES_PER_SECTION
> - };
> - unsigned long *frame_list, i, pfn;
> -
> - r = register_memory_resource(phys_addr, PAGES_PER_SECTION<< PAGE_SHIFT);
> -
> - if (!r)
> - return -EEXIST;
> -
> - frame_list = vmalloc(PAGES_PER_SECTION * sizeof(unsigned long));
> -
> - if (!frame_list) {
> - printk(KERN_ERR "%s: vmalloc: Out of memory\n", __func__);
> - ret = -ENOMEM;
> - goto error;
> - }
> -
> - set_xen_guest_handle(reservation.extent_start, frame_list);
> - for (i = 0, pfn = PFN_DOWN(phys_addr); i< PAGES_PER_SECTION; ++i, ++pfn)
> - frame_list[i] = pfn;
> -
> - ret = HYPERVISOR_memory_op(XENMEM_populate_physmap,&reservation);
> -
> - if (ret< PAGES_PER_SECTION) {
> - if (ret> 0) {
> - printk(KERN_ERR "%s: PHYSMAP is not fully "
> - "populated: %i/%lu\n", __func__,
> - ret, PAGES_PER_SECTION);
> - reservation.nr_extents = nr_pages = ret;
> - ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,&reservation);
> - BUG_ON(ret != nr_pages);
> - ret = -ENOMEM;
> - } else {
> - ret = (ret< 0) ? ret : -ENOMEM;
> - printk(KERN_ERR "%s: Can't populate PHYSMAP: %i\n", __func__, ret);
> - }
> - goto error;
> - }
> -
> - for (i = 0, pfn = PFN_DOWN(phys_addr); i< PAGES_PER_SECTION; ++i, ++pfn) {
> - BUG_ON(!xen_feature(XENFEAT_auto_translated_physmap)&&
> - phys_to_machine_mapping_valid(pfn));
> - set_phys_to_machine(pfn, frame_list[i]);
> - }
> -
> - ret = xen_add_memory(memory_add_physaddr_to_nid(phys_addr), phys_addr,
> - PAGES_PER_SECTION<< PAGE_SHIFT);
> -
> - if (ret) {
> - printk(KERN_ERR "%s: xen_add_memory: Memory hotplug "
> - "failed: %i\n", __func__, ret);
> - goto out;
> - }
> -
> - for (i = 0, pfn = PFN_DOWN(phys_addr); i< PAGES_PER_SECTION; ++i, ++pfn)
> - if (!PageHighMem(pfn_to_page(pfn)))
> - BUG_ON(HYPERVISOR_update_va_mapping(
> - (unsigned long)__va(pfn<< PAGE_SHIFT),
> - mfn_pte(frame_list[i], PAGE_KERNEL), 0));
> -
> - goto out;
> -
> -error:
> - release_memory_resource(r);
> -
> -out:
> - vfree(frame_list);
> -
> - return (ret< 0) ? ret : 0;
> -}
> -EXPORT_SYMBOL_GPL(xen_memory_probe);
> -#endif
> -
> #ifdef CONFIG_MEMORY_HOTREMOVE
> /*
> * A free page on the buddy free lists (not the per-cpu lists) has PageBuddy
>

Thanks,
J


\
 
 \ /
  Last update: 2010-08-06 19:45    [W:0.101 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site