lkml.org 
[lkml]   [2010]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/28] firmware: Update hotplug script
Date
From: Magnus Damm <damm@opensource.se>

Update the in-kernel hotplug example script to work
properly with recent kernels. Without this fix the
script may load the firmware twice - both at "add"
and "remove" time.

The second load only triggers in the case when multiple
firmware images are used. A good example is the b43
driver which does not work properly without this fix.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
Documentation/firmware_class/hotplug-script | 17 +++++++++--------
1 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/Documentation/firmware_class/hotplug-script b/Documentation/firmware_class/hotplug-script
index 1990130..8143a95 100644
--- a/Documentation/firmware_class/hotplug-script
+++ b/Documentation/firmware_class/hotplug-script
@@ -6,11 +6,12 @@

HOTPLUG_FW_DIR=/usr/lib/hotplug/firmware/

-echo 1 > /sys/$DEVPATH/loading
-cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data
-echo 0 > /sys/$DEVPATH/loading
-
-# To cancel the load in case of error:
-#
-# echo -1 > /sys/$DEVPATH/loading
-#
+if [ "$SUBSYSTEM" == "firmware" -a "$ACTION" == "add" ]; then
+ if [ -f $HOTPLUG_FW_DIR/$FIRMWARE ]; then
+ echo 1 > /sys/$DEVPATH/loading
+ cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data
+ echo 0 > /sys/$DEVPATH/loading
+ else
+ echo -1 > /sys/$DEVPATH/loading
+ fi
+fi
--
1.7.2


\
 
 \ /
  Last update: 2010-08-06 00:37    [W:0.060 / U:39.496 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site