lkml.org 
[lkml]   [2010]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/2] initramfs: Generalize initramfs_data.xxx.S variants
Remove initramfs_data.{lzo,lzma,gz,bz2}.S variants and use a common
implementation in initramfs_data.S. The common implementation expects
the file name of the initramfs to be defined in INITRAMFS_IMAGE.

Change the Makefile to set the INITRAMFS_IMAGE define symbol according
to the selected compression method.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
---
usr/Makefile | 6 ++++--
usr/initramfs_data.S | 5 +++--
usr/initramfs_data.bz2.S | 29 -----------------------------
usr/initramfs_data.gz.S | 29 -----------------------------
usr/initramfs_data.lzma.S | 29 -----------------------------
usr/initramfs_data.lzo.S | 29 -----------------------------
6 files changed, 7 insertions(+), 120 deletions(-)

--- a/usr/Makefile
+++ b/usr/Makefile
@@ -18,13 +18,15 @@ suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZ
# Lzo
suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZO) = .lzo

+AFLAGS_initramfs_data.o += -DINITRAMFS_IMAGE="usr/initramfs_data.cpio$(suffix_y)"
+
# Generate builtin.o based on initramfs_data.o
-obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data$(suffix_y).o
+obj-$(CONFIG_BLK_DEV_INITRD) := initramfs_data.o

# initramfs_data.o contains the compressed initramfs_data.cpio image.
# The image is included using .incbin, a dependency which is not
# tracked automatically.
-$(obj)/initramfs_data$(suffix_y).o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE
+$(obj)/initramfs_data.o: $(obj)/initramfs_data.cpio$(suffix_y) FORCE

#####
# Generate the initramfs cpio archive
--- a/usr/initramfs_data.S
+++ b/usr/initramfs_data.S
@@ -25,6 +25,7 @@ SECTIONS
in the ELF header, as required by certain architectures.
*/

-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio"
+#include <linux/stringify.h>

+.section .init.ramfs,"a"
+.incbin __stringify(INITRAMFS_IMAGE)
--- a/usr/initramfs_data.bz2.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.bz2"
--- a/usr/initramfs_data.gz.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.gz"
--- a/usr/initramfs_data.lzma.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.lzma"
--- a/usr/initramfs_data.lzo.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- initramfs_data includes the compressed binary that is the
- filesystem used for early user space.
- Note: Older versions of "as" (prior to binutils 2.11.90.0.23
- released on 2001-07-14) dit not support .incbin.
- If you are forced to use older binutils than that then the
- following trick can be applied to create the resulting binary:
-
-
- ld -m elf_i386 --format binary --oformat elf32-i386 -r \
- -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
- ld -m elf_i386 -r -o built-in.o initramfs_data.o
-
- initramfs_data.scr looks like this:
-SECTIONS
-{
- .init.ramfs : { *(.data) }
-}
-
- The above example is for i386 - the parameters vary from architectures.
- Eventually look up LDFLAGS_BLOB in an older version of the
- arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.
-
- Using .incbin has the advantage over ld that the correct flags are set
- in the ELF header, as required by certain architectures.
-*/
-
-.section .init.ramfs,"a"
-.incbin "usr/initramfs_data.cpio.lzo"
--


\
 
 \ /
  Last update: 2010-08-31 10:41    [W:0.095 / U:4.756 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site