lkml.org 
[lkml]   [2010]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v3] input: Add support for Hanwang tablet
From: Xing Wei  <weixing@hanwang.com.cn>

Add support for Art Master III tablet of BeiJing HanwangTechnology Co, Ltd.

Signed-off-by: Xing Wei <weixing@hanwang.com.cn>

---

Thanks for dmitry's comment & advice.
And I removed the part -- "Make sure to say Y to 'Mouse support(CONFIG_INPUT_MOUSEDEV)' and/or 'Event interface support'
(CONFIG_INPUT_EVDEV) as well" in the Kconfig.

diff -uprN -X linux-2.6.35.3-vanilla/Documentation/dontdiff linux-2.6.35.3-vanilla/drivers/hid/hid-core.c devel/linux-2.6.35.3/drivers/hid/hid-core.c
--- linux-2.6.35.3-vanilla/drivers/hid/hid-core.c 2010-08-21 02:55:55.000000000 +0800
+++ devel/linux-2.6.35.3/drivers/hid/hid-core.c 2010-08-25 18:02:15.942574998 +0800
@@ -1759,6 +1759,11 @@ static bool hid_ignore(struct hid_device
hdev->product <= USB_DEVICE_ID_SOUNDGRAPH_IMON_LAST)
return true;
break;
+ case USB_VENDOR_ID_HANWANG:
+ if (hdev->product >= USB_DEVICE_ID_HANWANG_TABLET_FIRST &&
+ hdev->product <= USB_DEVICE_ID_HANWANG_TABLET_LAST)
+ return true;
+ break;
}

if (hdev->type == HID_TYPE_USBMOUSE &&
diff -uprN -X linux-2.6.35.3-vanilla/Documentation/dontdiff linux-2.6.35.3-vanilla/drivers/hid/hid-ids.h devel/linux-2.6.35.3/drivers/hid/hid-ids.h
--- linux-2.6.35.3-vanilla/drivers/hid/hid-ids.h 2010-08-21 02:55:55.000000000 +0800
+++ devel/linux-2.6.35.3/drivers/hid/hid-ids.h 2010-08-25 18:00:21.416574999 +0800
@@ -526,5 +526,8 @@
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003

+#define USB_VENDOR_ID_HANWANG 0x0b57
+#define USB_DEVICE_ID_HANWANG_TABLET_FIRST 0x5000
+#define USB_DEVICE_ID_HANWANG_TABLET_LAST 0x8fff

#endif
diff -uprN -X linux-2.6.35.3-vanilla/Documentation/dontdiff linux-2.6.35.3-vanilla/drivers/input/tablet/hanwang.c devel/linux-2.6.35.3/drivers/input/tablet/hanwang.c
--- linux-2.6.35.3-vanilla/drivers/input/tablet/hanwang.c 1970-01-01 08:00:00.000000000 +0800
+++ devel/linux-2.6.35.3/drivers/input/tablet/hanwang.c 2010-08-31 15:58:00.892882002 +0800
@@ -0,0 +1,359 @@
+/*
+ * USB Hanwang tablet support
+ *
+ * Copyright (c) 2010 Xing Wei <weixing@hanwang.com.cn>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+
+#define DRIVER_AUTHOR "Xing Wei <weixing@hanwang.com.cn>"
+#define DRIVER_DESC "USB Hanwang tablet driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_HANWANG 0x0b57
+#define HANWANG_TABLET_INT_CLASS 0x0003
+#define HANWANG_TABLET_INT_SUB_CLASS 0x0001
+#define HANWANG_TABLET_INT_PROTOCOL 0x0002
+
+#define ART_MASTERIII_PKGLEN_MAX 10
+
+/* match vendor and interface info */
+#define HANWANG_TABLET_DEVICE(vend, cl, sc, pr) \
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR \
+ | USB_DEVICE_ID_MATCH_INT_INFO, \
+ .idVendor = (vend), \
+ .bInterfaceClass = (cl), \
+ .bInterfaceSubClass = (sc), \
+ .bInterfaceProtocol = (pr)
+
+struct hanwang_state {
+ unsigned int tool_style;
+ unsigned int tool_state;
+};
+struct hanwang {
+ char name[64];
+ unsigned char *data;
+ dma_addr_t data_dma;
+ struct input_dev *dev;
+ struct usb_device *usbdev;
+ struct urb *irq;
+ const struct hanwang_features *features;
+ struct hanwang_state hws;
+ char phys[32];
+};
+
+struct hanwang_features {
+ unsigned short pid;
+ int pkg_len;
+ char *name;
+ int max_x;
+ int max_y;
+ int max_tilt_x;
+ int max_tilt_y;
+ int max_pressure;
+ int max_distance;
+};
+
+
+static const struct hanwang_features features_array[] = {
+ {0x8528, ART_MASTERIII_PKGLEN_MAX, "Hanwang Art Master III 0906",
+ 0x5757, 0x3692, 0x3f, 0x7f, 2048, 0xff},
+ {0x8529, ART_MASTERIII_PKGLEN_MAX, "Hanwang Art Master III 0604",
+ 0x3d84, 0x2672, 0x3f, 0x7f, 2048, 0xff},
+ {0x852a, ART_MASTERIII_PKGLEN_MAX, "Hanwang Art Master III 1308",
+ 0x7f00, 0x4f60, 0x3f, 0x7f, 2048, 0xff},
+};
+
+static const int hw_eventtypes[] = {
+ EV_KEY, EV_ABS,
+};
+
+static const int hw_absevents[] = {
+ ABS_X, ABS_Y, ABS_TILT_X, ABS_TILT_Y, ABS_WHEEL,
+ ABS_PRESSURE, ABS_DISTANCE
+};
+
+static const int hw_btnevents[] = {
+ BTN_STYLUS, BTN_STYLUS2, BTN_TOOL_PEN, BTN_TOOL_RUBBER,
+ BTN_TOOL_MOUSE, BTN_0, BTN_1, BTN_2, BTN_3, BTN_4,
+ BTN_5, BTN_6, BTN_7, BTN_8
+};
+
+static struct usb_device_id hanwang_ids[] = {
+ {HANWANG_TABLET_DEVICE(USB_VENDOR_ID_HANWANG, HANWANG_TABLET_INT_CLASS,
+ HANWANG_TABLET_INT_SUB_CLASS, HANWANG_TABLET_INT_PROTOCOL)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, hanwang_ids);
+
+static int hanwang_open(struct input_dev *dev)
+{
+ struct hanwang *hanwang = input_get_drvdata(dev);
+
+ hanwang->irq->dev = hanwang->usbdev;
+ if (usb_submit_urb(hanwang->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void hanwang_close(struct input_dev *dev)
+{
+ struct hanwang *hanwang = input_get_drvdata(dev);
+
+ usb_kill_urb(hanwang->irq);
+}
+
+static void hanwang_irq(struct urb *urb)
+{
+
+ struct hanwang *hanwang = urb->context;
+ unsigned char *data = hanwang->data;
+ struct input_dev *input_dev = hanwang->dev;
+ struct usb_device *dev = hanwang->usbdev;
+ struct hanwang_state *phws = &hanwang->hws;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */;
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dev_err(&dev->dev, "%s - urb shutting down with status: %d",
+ __func__, urb->status);
+ return;
+ default:
+ dev_err(&dev->dev, "%s - nonzero urb status received: %d",
+ __func__, urb->status);
+ goto exit;
+ }
+
+ /* data packet */
+ if (data[0] == 0x02) {
+ /* tool prox out */
+ if (data[1] == 0x80) {
+ input_report_key(input_dev, phws->tool_style, 0);
+ } else if (data[1] == 0xc2) { /* first time tool prox in */
+ switch (data[3] & 0xf0) {
+ case 0x20:
+ phws->tool_style = BTN_TOOL_PEN;
+ input_report_key(input_dev, BTN_TOOL_PEN, 1);
+ break;
+ case 0xa0:
+ phws->tool_style = BTN_TOOL_RUBBER;
+ input_report_key(input_dev, BTN_TOOL_RUBBER, 1);
+ break;
+ default:
+ dev_dbg(&dev->dev, "unknown tablet tool %02x ", data[0]);
+ break;
+ }
+ } else { /* tool data packet */
+ input_report_abs(input_dev, ABS_X, (data[2] << 8) | data[3]);
+ input_report_abs(input_dev, ABS_Y, (data[4] << 8) | data[5]);
+ input_report_abs(input_dev, ABS_PRESSURE, (data[6] << 3) |
+ ((data[7] & 0xc0) >> 5) |
+ (data[1] & 0x01));
+ input_report_abs(input_dev, ABS_TILT_X, data[7] & 0x3f);
+ input_report_abs(input_dev, ABS_TILT_Y, data[8] & 0x7f);
+ input_report_key(input_dev, BTN_STYLUS,
+ (data[1] & 0x02) >> 1);
+ input_report_key(input_dev, BTN_STYLUS2,
+ (data[1] & 0x04) >> 2);
+ }
+ } else if (data[0] == 0x0c) { /* roll wheel */
+ if (data[1])
+ input_report_abs(input_dev, ABS_WHEEL, data[1]);
+ input_report_key(input_dev, BTN_0, data[2]);
+ input_report_key(input_dev, BTN_1, data[3] & 0x01);
+ input_report_key(input_dev, BTN_2, data[3] & 0x02);
+ input_report_key(input_dev, BTN_3, data[3] & 0x04);
+ input_report_key(input_dev, BTN_4, data[3] & 0x08);
+ input_report_key(input_dev, BTN_5, data[3] & 0x10);
+ input_report_key(input_dev, BTN_6, data[3] & 0x20);
+ input_report_key(input_dev, BTN_7, data[3] & 0x30);
+ input_report_key(input_dev, BTN_8, data[3] & 0x40);
+ } else {
+ dev_dbg(&dev->dev, "error packet %02x ", data[0]);
+ }
+
+ input_sync(input_dev);
+
+exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d",
+ __func__, retval);
+}
+
+static bool get_features(struct usb_device *dev, struct hanwang *hanwang)
+{
+ int i, total_features;
+
+ total_features = ARRAY_SIZE(features_array);
+ for (i = 0; i < total_features; i++) {
+ if (le16_to_cpu(dev->descriptor.idProduct) ==
+ features_array[i].pid) {
+ hanwang->features = &features_array[i];
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+
+static int hanwang_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *endpoint;
+ struct hanwang *hanwang;
+ struct input_dev *input_dev;
+ int error = -ENOMEM;
+ int i;
+
+ hanwang = kzalloc(sizeof(struct hanwang), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!hanwang || !input_dev)
+ goto fail1;
+
+ if (!get_features(dev, hanwang))
+ goto fail1;
+
+ hanwang->data = usb_alloc_coherent(dev, hanwang->features->pkg_len,
+ GFP_KERNEL, &hanwang->data_dma);
+ if (!hanwang->data)
+ goto fail1;
+
+ hanwang->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!hanwang->irq)
+ goto fail2;
+
+ hanwang->usbdev = dev;
+ hanwang->dev = input_dev;
+
+ usb_make_path(dev, hanwang->phys, sizeof(hanwang->phys));
+ strlcat(hanwang->phys, "/input0", sizeof(hanwang->phys));
+
+ strlcpy(hanwang->name, hanwang->features->name, sizeof(hanwang->name));
+ input_dev->name = hanwang->name;
+ input_dev->phys = hanwang->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, hanwang);
+
+ input_dev->open = hanwang_open;
+ input_dev->close = hanwang_close;
+
+ for (i = 0; i < ARRAY_SIZE(hw_eventtypes); ++i)
+ __set_bit(hw_eventtypes[i], input_dev->evbit);
+
+ for (i = 0; i < ARRAY_SIZE(hw_absevents); ++i)
+ __set_bit(hw_absevents[i], input_dev->absbit);
+
+ for (i = 0; i < ARRAY_SIZE(hw_btnevents); ++i)
+ __set_bit(hw_btnevents[i], input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_X, 0,
+ hanwang->features->max_x, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0,
+ hanwang->features->max_y, 4, 0);
+ input_set_abs_params(input_dev, ABS_TILT_X, 0,
+ hanwang->features->max_tilt_x, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_Y, 0,
+ hanwang->features->max_tilt_y, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0,
+ hanwang->features->max_pressure, 0, 0);
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0,
+ hanwang->features->max_distance, 0, 0);
+
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(hanwang->irq, dev,
+ usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+ hanwang->data, hanwang->features->pkg_len,
+ hanwang_irq, hanwang, endpoint->bInterval);
+ hanwang->irq->transfer_dma = hanwang->data_dma;
+ hanwang->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ error = input_register_device(hanwang->dev);
+ if (error)
+ goto fail3;
+
+ usb_set_intfdata(intf, hanwang);
+
+ return 0;
+
+ fail3: usb_free_urb(hanwang->irq);
+ fail2: usb_free_coherent(dev, hanwang->features->pkg_len,
+ hanwang->data, hanwang->data_dma);
+ fail1: input_free_device(input_dev);
+ kfree(hanwang);
+ return error;
+
+}
+
+static void hanwang_disconnect(struct usb_interface *intf)
+{
+ struct hanwang *hanwang = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (hanwang) {
+ usb_kill_urb(hanwang->irq);
+ input_unregister_device(hanwang->dev);
+ usb_free_urb(hanwang->irq);
+ usb_free_coherent(interface_to_usbdev(intf),
+ hanwang->features->pkg_len, hanwang->data,
+ hanwang->data_dma);
+ kfree(hanwang);
+ }
+}
+
+static struct usb_driver hanwang_driver = {
+ .name = "hanwang",
+ .probe = hanwang_probe,
+ .disconnect = hanwang_disconnect,
+ .id_table = hanwang_ids,
+};
+
+static int __init hanwang_init(void)
+{
+ return usb_register(&hanwang_driver);
+}
+
+static void __exit hanwang_exit(void)
+{
+ usb_deregister(&hanwang_driver);
+}
+
+module_init(hanwang_init);
+module_exit(hanwang_exit);
diff -uprN -X linux-2.6.35.3-vanilla/Documentation/dontdiff linux-2.6.35.3-vanilla/drivers/input/tablet/Kconfig devel/linux-2.6.35.3/drivers/input/tablet/Kconfig
--- linux-2.6.35.3-vanilla/drivers/input/tablet/Kconfig 2010-08-21 02:55:55.000000000 +0800
+++ devel/linux-2.6.35.3/drivers/input/tablet/Kconfig 2010-08-31 10:03:31.613679001 +0800
@@ -49,6 +49,17 @@ config TABLET_USB_GTCO
To compile this driver as a module, choose M here: the
module will be called gtco.

+config TABLET_USB_HANWANG
+ tristate "Hanwang Art Master III tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use the USB version of the Hanwang Art
+ Master III tablet.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hanwang.
+
config TABLET_USB_KBTAB
tristate "KB Gear JamStudio tablet support (USB)"
depends on USB_ARCH_HAS_HCD
diff -uprN -X linux-2.6.35.3-vanilla/Documentation/dontdiff linux-2.6.35.3-vanilla/drivers/input/tablet/Makefile devel/linux-2.6.35.3/drivers/input/tablet/Makefile
--- linux-2.6.35.3-vanilla/drivers/input/tablet/Makefile 2010-08-21 02:55:55.000000000 +0800
+++ devel/linux-2.6.35.3/drivers/input/tablet/Makefile 2010-08-31 15:49:35.276547001 +0800
@@ -8,5 +8,6 @@ wacom-objs := wacom_wac.o wacom_sys.o
obj-$(CONFIG_TABLET_USB_ACECAD) += acecad.o
obj-$(CONFIG_TABLET_USB_AIPTEK) += aiptek.o
obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o
+obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o
obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o
obj-$(CONFIG_TABLET_USB_WACOM) += wacom.o


\
 
 \ /
  Last update: 2010-08-31 10:17    [W:0.068 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site