lkml.org 
[lkml]   [2010]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/7 v3] HID: magicmouse: don't allow hidinput to initialize the device
Date
From: Chase Douglas <chase.douglas@ubuntu.com>

The driver listens only for raw events from the device. If we allow
the hidinput layer to initialize, we can hit NULL pointer dereferences
in the hidinput layer because disconnecting only removes the hidinput
devices from the hid device while leaving the hid fields configured.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Michael Poole <mdpoole@troilus.org>
---
drivers/hid/hid-magicmouse.c | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index 319b0e5..d38b529 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -404,15 +404,20 @@ static int magicmouse_probe(struct hid_device *hdev,
goto err_free;
}

- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ /* When registering a hid device, one of hidinput, hidraw, or hiddev
+ * subsystems must claim the device. We are bypassing hidinput due to
+ * our raw event processing, and hidraw and hiddev may not claim the
+ * device. We get around this by telling hid_hw_start that input has
+ * claimed the device already, and then flipping the bit back.
+ */
+ hdev->claimed = HID_CLAIMED_INPUT;
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_HIDINPUT);
+ hdev->claimed &= ~HID_CLAIMED_INPUT;
if (ret) {
dev_err(&hdev->dev, "magicmouse hw start failed\n");
goto err_free;
}

- /* we are handling the input ourselves */
- hidinput_disconnect(hdev);
-
report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID);
if (!report) {
dev_err(&hdev->dev, "unable to register touch report\n");
--
1.7.1


\
 
 \ /
  Last update: 2010-09-01 03:59    [W:0.145 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site