lkml.org 
[lkml]   [2010]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 0/8] [Resend] ideapad: using EC command to control rf/camera power
Hello Ike,

On Wed, Aug 25, 2010 at 07:59:30PM +0800, Ike Panhc wrote:
> On 08/20/2010 05:08 PM, Mario 'BitKoenig' Holbe wrote:
> > On Fri, Aug 20, 2010 at 03:01:07PM +0800, Ike Panhc wrote:
> >> Could you attach or upload the DSDT of S12 somewhere I can reach?
> >
> > http://sandbox.fem.tu-ilmenau.de/s12/dsdt-s12-via.dsl
> >
> >> I check DSDT for S10-3 and B550, return value of _CFG is fixed.
> >> [Ref: http://people.ubuntu.com/~ikepanhc/DSDTs]
> >
> > Looks more fixed than on my S12, indeed.
> > I don't really speak AML, but while S10-3 ILDD (called from _CFG) seems
> > to read fixed values only, here on S12 PHSR (called from _CFG) seems to
> > do some kind of I/O operation. I'm not sure about this, but it somehow
> > looks like.
> >
> It accesses something in system memory, but I have no idea what will happen
> after writing..

Well, the pattern looks like I/O - mmapped I/O.
Store (Arg1, \_SB.INF0)
Store (Arg0, \_SB.BCMD)
Store (Zero, \_SB.SMIC)
Store (\_SB.INF0, Local0)

Note that INF0 is written before and read after writing SMIC. Hence,
for this to be useful, something must have happened inbetween, i.e.
I/O :)

> There are two variables need to be written for turning on/off bluetooth. They are
> BTST(in memory) and BTEN(is EC register). I will guess there are some sync failed
> when enable bluetooth.

What exactly do you mean with "there are some sync failed"? I don't see
anything like that in the logs.

> This could be a plan. I have several idea to go and need your help.
> - Add some debug message to read BTST/BTEN when turning on/off bluetooth.
> - Force to set BTST/BTEN before reading _CFG
> - Provide a module parm to force enable rf devices.
>
> Will have the drivers and please test it and let me know the result.

Hmmm, I don't know if I got you right. I didn't find any new drivers to
test, so I tried to add some more debug code myself. Hope this helps.
I added some code to show_ideapad_cam() to be able to asynchronously
trigger reading of BTST, BTEN, and BTPS. As before: the patch attached
is not for inclusion but to show what I did. I'm usually not a kernel
hacker, so please take a serious look at what I did before trusting the
results :)

I attached a full protocol of actions I performed including kernel
dmesges. Typed commands are prepended by #, manual actions and comments
are enclosed in <>, kernel messages are timestamped, the rest is output
of the commands.
Basically I did the following:
0. I started with a fresh powered up system, all RF devices powered on.
1. I hw-switched RF off and back on, which went okay.
2. I sw-switched BT off and back on, which resulted in erroneous
initialization.
3. I again sw-switched BT off and back on, which resulted in BT being
completely gone.
4. I hw-switched RF off and back on, which brought BT back and
operational.

> > I played with the hardware killswitch under Linux. The bluetooth device
> > disappears and re-appears there and always seems to initialize
> > correctly. No USB read errors this way.
...
> > I'm not exactly sure what this means - especially because I don't know
> > how the hardware killswitch works internally.
> > It *could* mean, the initialization problem is proably something that
> > could be dealt with in the USB layer long term (and would then probably
> > not have to be worked around anymore in ideapad_laptop). I'm not sure
> > about this, because this would mean the hard killswitch power-cut
> > somehow differs from the soft killswitch power-cut.
> Usually the hw rf switch turning off PHY only. When turning off, device and
> its driver is still there. I believe S12 is designed in this way after
> reading your test result.

Hmmm, I don't understand your reasoning here.
I said the device disappears and re-appears when using the hw rf switch,
this doesn't look like it would turn off PHY only.


best regards
Mario
--
We know that communication is a problem, but the company is not going to
discuss it with the employees.
-- Switching supervisor, AT&T Long Lines Division
--- ideapad_laptop.c.orig 2010-08-18 13:35:36.087735426 +0200
+++ ideapad_laptop.c 2010-08-30 19:05:53.116031145 +0200
@@ -170,6 +170,18 @@ static ssize_t show_ideapad_cam(struct d
struct ideapad_private *priv = dev_get_drvdata(dev);
acpi_handle handle = priv->handle;
unsigned long result;
+ acpi_status res;
+ u64 res64;
+
+ res = acpi_evaluate_integer(handle, "\\_SB.BTST", NULL, &res64);
+ if(!ACPI_FAILURE(res))
+ printk(KERN_INFO "BTST: 0x%llx\n", res64);
+ res = acpi_evaluate_integer(handle, "\\_SB.BTPS", NULL, &res64);
+ if(!ACPI_FAILURE(res))
+ printk(KERN_INFO "BTPS: 0x%llx\n", res64);
+ res = acpi_evaluate_integer(handle, "\\_SB.PCI0.PIB.EC0.BTEN", NULL, &res64);
+ if(!ACPI_FAILURE(res))
+ printk(KERN_INFO "BTEN: 0x%llx\n", res64);

if (read_ec_data(handle, 0x1D, &result))
return sprintf(buf, "-1\n");
@@ -279,11 +291,19 @@ static int ideapad_acpi_add(struct acpi_
if (read_method_int(adevice->handle, "_CFG", &cfg))
return -ENODEV;

+ printk(KERN_INFO "ideapad_acpi_add(): cfg=0x%x\n", cfg);
+
for (i = IDEAPAD_DEV_CAMERA; i < IDEAPAD_DEV_KILLSW; i++) {
- if (test_bit(ideapad_rfk_data[i].cfgbit, (unsigned long *)&cfg))
+ if (test_bit(ideapad_rfk_data[i].cfgbit, (unsigned long *)&cfg)) {
devs_present[i] = 1;
- else
- devs_present[i] = 0;
+ printk(KERN_INFO "ideapad_acpi_add(): found: %s\n", ideapad_rfk_data[i].name);
+ } else {
+ if(ideapad_rfk_data[i].type == RFKILL_TYPE_BLUETOOTH) {
+ devs_present[i] = 1;
+ printk(KERN_INFO "ideapad_acpi_add(): forced: %s\n", ideapad_rfk_data[i].name);
+ } else
+ devs_present[i] = 0;
+ }
}

/* The hardware switch is always present */<fresh powered up system>
# cat $(find /sys -name camera_power)
[ 140.121467] BTST: 0x1
[ 140.121475] BTPS: 0x1
[ 140.122378] BTEN: 0x1
1
<hw killswitch off>
[ 199.296090] usb 4-1: USB disconnect, address 2
[ 199.296789] btusb_intr_complete: hci0 urb f6990300 failed to resubmit (19)
[ 199.296808] btusb_bulk_complete: hci0 urb f6990380 failed to resubmit (19)
[ 199.297789] btusb_bulk_complete: hci0 urb f6990000 failed to resubmit (19)
[ 199.297991] btusb_send_frame: hci0 urb f6766200 submission failed
[ 199.784704] wlan0: deauthenticating from 00:1c:f0:e4:3d:a9 by local choice (reason=3)
[ 199.786981] cfg80211: Calling CRDA to update world regulatory domain
[ 200.852176] b43-phy0: Radio hardware status changed to DISABLED
# cat $(find /sys -name camera_power)
[ 219.129098] BTST: 0x1
[ 219.129105] BTPS: 0x1
[ 219.130017] BTEN: 0x1
1
<hw killswitch on>
[ 257.968055] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 258.141407] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2150
[ 258.141420] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 258.141431] usb 4-1: Product: BCM2046 Bluetooth Device
[ 258.141440] usb 4-1: Manufacturer: Broadcom Corp
[ 258.141448] usb 4-1: SerialNumber: 0C6076DC9FD0
[ 260.852114] b43-phy0: Radio hardware status changed to ENABLED
[ 261.076117] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 266.592252] b43-pci-bridge 0000:02:00.0: PCI: Disallowing DAC for device
[ 266.592264] b43-phy0: DMA mask fallback from 64-bit to 32-bit
[ 266.633509] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 269.380720] wlan0: authenticate with 00:1c:f0:e4:3d:a9 (try 1)
[ 269.382273] wlan0: authenticated
[ 269.382689] wlan0: associate with 00:1c:f0:e4:3d:a9 (try 1)
[ 269.385522] wlan0: RX AssocResp from 00:1c:f0:e4:3d:a9 (capab=0x431 status=0 aid=1)
[ 269.385534] wlan0: associated
[ 269.392770] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 279.928033] wlan0: no IPv6 routers present
# cat $(find /sys -name camera_power)
[ 291.431607] BTST: 0x1
[ 291.431614] BTPS: 0x1
[ 291.433096] BTEN: 0x1
1
# rfkill block $(rfkill list | awk -F: '/ideapad_bluetooth/{print $1}')
[ 341.416077] usb 4-1: USB disconnect, address 3
[ 341.416547] btusb_intr_complete: hci0 urb f6747b80 failed to resubmit (19)
[ 341.416559] btusb_bulk_complete: hci0 urb f6798300 failed to resubmit (19)
[ 341.417546] btusb_bulk_complete: hci0 urb f674e080 failed to resubmit (19)
[ 341.417944] btusb_send_frame: hci0 urb f67e5500 submission failed
# cat $(find /sys -name camera_power)
[ 364.592492] BTST: 0x0
[ 364.592499] BTPS: 0x1
[ 364.593586] BTEN: 0x0
1
# rfkill unblock $(rfkill list | awk -F: '/ideapad_bluetooth/{print $1}')
[ 392.192070] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 392.312040] usb 4-1: device descriptor read/64, error -71
[ 392.536066] usb 4-1: device descriptor read/64, error -71
[ 392.752073] usb 4-1: new full speed USB device using uhci_hcd and address 5
[ 392.872077] usb 4-1: device descriptor read/64, error -71
[ 393.096059] usb 4-1: device descriptor read/64, error -71
[ 393.312043] usb 4-1: new full speed USB device using uhci_hcd and address 6
[ 393.720143] usb 4-1: device not accepting address 6, error -71
[ 393.832051] usb 4-1: new full speed USB device using uhci_hcd and address 7
[ 394.240083] usb 4-1: device not accepting address 7, error -71
[ 394.240105] hub 4-0:1.0: unable to enumerate USB device on port 1
# cat $(find /sys -name camera_power)
[ 458.669365] BTST: 0x1
[ 458.669372] BTPS: 0x1
[ 458.670744] BTEN: 0x1
1
# rfkill block $(rfkill list | awk -F: '/ideapad_bluetooth/{print $1}')
<absolutely no messages, no errors, nothing>
# cat $(find /sys -name camera_power)
[ 576.981559] BTST: 0x0
[ 576.981567] BTPS: 0x1
[ 576.982900] BTEN: 0x0
1
# rfkill unblock $(rfkill list | awk -F: '/ideapad_bluetooth/{print $1}')
<absolutely no messages, device does not appear, no errors, nothing>
# cat $(find /sys -name camera_power)
[ 652.939495] BTST: 0x1
[ 652.939503] BTPS: 0x1
[ 652.941192] BTEN: 0x1
1
<hw killswitch off>
[ 701.234772] wlan0: deauthenticating from 00:1c:f0:e4:3d:a9 by local choice (reason=3)
[ 701.237446] cfg80211: Calling CRDA to update world regulatory domain
[ 702.036108] b43-phy0: Radio hardware status changed to DISABLED
# cat $(find /sys -name camera_power)
[ 722.962717] BTST: 0x1
[ 722.962724] BTPS: 0x1
[ 722.964822] BTEN: 0x1
1
<hw killswitch on>
[ 757.028180] b43-phy0: Radio hardware status changed to ENABLED
[ 757.379142] usb 4-1: new full speed USB device using uhci_hcd and address 8
[ 757.432136] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 757.552383] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2150
[ 757.552396] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 757.552407] usb 4-1: Product: BCM2046 Bluetooth Device
[ 757.552415] usb 4-1: Manufacturer: Broadcom Corp
[ 757.552423] usb 4-1: SerialNumber: 0C6076DC9FD0
[ 762.952258] b43-pci-bridge 0000:02:00.0: PCI: Disallowing DAC for device
[ 762.952271] b43-phy0: DMA mask fallback from 64-bit to 32-bit
[ 762.985688] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 765.728762] wlan0: authenticate with 00:1c:f0:e4:3d:a9 (try 1)
[ 765.730314] wlan0: authenticated
[ 765.730738] wlan0: associate with 00:1c:f0:e4:3d:a9 (try 1)
[ 765.734126] wlan0: RX AssocResp from 00:1c:f0:e4:3d:a9 (capab=0x431 status=0 aid=1)
[ 765.734137] wlan0: associated
[ 765.738373] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 775.760029] wlan0: no IPv6 routers present
# cat $(find /sys -name camera_power)
[ 797.842123] BTST: 0x1
[ 797.842131] BTPS: 0x1
[ 797.843030] BTEN: 0x1
1
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2010-08-30 20:23    [W:0.204 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site