lkml.org 
[lkml]   [2010]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRE: [PATCH 3/3] ARM: Samsung S3C: Move/use the S3C common GPIO IRQ type
Kyungmin Park wrote:
>
> From: Kyungmin Park <kyungmin.park@samsung.com>
>
> Samsung S3C series have the common GPIO IRQ type for all S3C series.
>
I can't agree with your changing name. Why do you want to change the name?
If you want to move S3C2410_EXTINT_XXX from regs-irqtype.h, just move
without any changes.

But I'm still thinking why should we move the external interrupt definitions
to plat/gpio-core.h...

> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> arch/arm/mach-s3c64xx/irq-eint.c | 12 ++++++------
> arch/arm/plat-s3c24xx/irq.c | 14 +++++++-------
> arch/arm/plat-s5p/irq-eint.c | 2 --
> arch/arm/plat-samsung/include/plat/gpio-core.h | 6 ++++++
> arch/arm/plat-samsung/include/plat/regs-irqtype.h | 21
---------------------
> 5 files changed, 19 insertions(+), 36 deletions(-)
> delete mode 100644 arch/arm/plat-samsung/include/plat/regs-irqtype.h
>
> diff --git a/arch/arm/mach-s3c64xx/irq-eint.c
b/arch/arm/mach-s3c64xx/irq-eint.c
> index 5682d6a..c079147 100644
> --- a/arch/arm/mach-s3c64xx/irq-eint.c
> +++ b/arch/arm/mach-s3c64xx/irq-eint.c
> @@ -21,8 +21,8 @@
>
> #include <asm/hardware/vic.h>
>
> -#include <plat/regs-irqtype.h>
> #include <mach/regs-gpio.h>
> +#include <plat/gpio-core.h>
> #include <plat/gpio-cfg.h>
>
> #include <mach/map.h>
> @@ -85,23 +85,23 @@ static int s3c_irq_eint_set_type(unsigned int irq,
unsigned
> int type)
> break;
>
> case IRQ_TYPE_EDGE_RISING:
> - newvalue = S3C2410_EXTINT_RISEEDGE;
> + newvalue = S3C_GPIO_EDGE_RISING;
> break;
>
> case IRQ_TYPE_EDGE_FALLING:
> - newvalue = S3C2410_EXTINT_FALLEDGE;
> + newvalue = S3C_GPIO_EDGE_FALLING;
> break;
>
> case IRQ_TYPE_EDGE_BOTH:
> - newvalue = S3C2410_EXTINT_BOTHEDGE;
> + newvalue = S3C_GPIO_EDGE_BOTH;
> break;
>
> case IRQ_TYPE_LEVEL_LOW:
> - newvalue = S3C2410_EXTINT_LOWLEV;
> + newvalue = S3C_GPIO_LEVEL_LOW;
> break;
>
> case IRQ_TYPE_LEVEL_HIGH:
> - newvalue = S3C2410_EXTINT_HILEV;
> + newvalue = S3C_GPIO_LEVEL_HIGH;
> break;
>
> default:
> diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
> index ad0d44e..e1a6fe5 100644
> --- a/arch/arm/plat-s3c24xx/irq.c
> +++ b/arch/arm/plat-s3c24xx/irq.c
> @@ -23,12 +23,12 @@
> #include <linux/interrupt.h>
> #include <linux/ioport.h>
> #include <linux/sysdev.h>
> +#include <linux/gpio.h>
>
Why need this inclusion?

> #include <asm/irq.h>
> #include <asm/mach/irq.h>
>
> -#include <plat/regs-irqtype.h>
> -
> +#include <plat/gpio-core.h>
> #include <plat/cpu.h>
> #include <plat/pm.h>
> #include <plat/irq.h>
> @@ -201,23 +201,23 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
> break;
>
> case IRQ_TYPE_EDGE_RISING:
> - newvalue = S3C2410_EXTINT_RISEEDGE;
> + newvalue = S3C_GPIO_EDGE_RISING;
> break;
>
> case IRQ_TYPE_EDGE_FALLING:
> - newvalue = S3C2410_EXTINT_FALLEDGE;
> + newvalue = S3C_GPIO_EDGE_FALLING;
> break;
>
> case IRQ_TYPE_EDGE_BOTH:
> - newvalue = S3C2410_EXTINT_BOTHEDGE;
> + newvalue = S3C_GPIO_EDGE_BOTH;
> break;
>
> case IRQ_TYPE_LEVEL_LOW:
> - newvalue = S3C2410_EXTINT_LOWLEV;
> + newvalue = S3C_GPIO_LEVEL_LOW;
> break;
>
> case IRQ_TYPE_LEVEL_HIGH:
> - newvalue = S3C2410_EXTINT_HILEV;
> + newvalue = S3C_GPIO_LEVEL_HIGH;
> break;
>
> default:
> diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
> index 4e0d94b..02d6ea2 100644
> --- a/arch/arm/plat-s5p/irq-eint.c
> +++ b/arch/arm/plat-s5p/irq-eint.c
> @@ -19,8 +19,6 @@
>
> #include <asm/hardware/vic.h>
>
> -#include <plat/regs-irqtype.h>
> -
> #include <mach/map.h>
> #include <plat/cpu.h>
> #include <plat/pm.h>
> diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h
b/arch/arm/plat-
> samsung/include/plat/gpio-core.h
> index c8681e0..2aef589 100644
> --- a/arch/arm/plat-samsung/include/plat/gpio-core.h
> +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
> @@ -14,6 +14,12 @@
> #define GPIOCON_OFF (0x00)
> #define GPIODAT_OFF (0x04)
>
> +#define S3C_GPIO_LEVEL_LOW (0x00)
> +#define S3C_GPIO_LEVEL_HIGH (0x01)
> +#define S3C_GPIO_EDGE_FALLING (0x02)
> +#define S3C_GPIO_EDGE_RISING (0x04)
> +#define S3C_GPIO_EDGE_BOTH (0x06)
> +
GPIO_LELVEL? GPIO_EDGE?...

I think EXTINT_LEVEL_XXX and EXTINT_EDGE_XXX are more clear.

> #define S5P_GPIO_LEVEL_LOW (0x00)
> #define S5P_GPIO_LEVEL_HIGH (0x01)
> #define S5P_GPIO_EDGE_FALLING (0x02)
> diff --git a/arch/arm/plat-samsung/include/plat/regs-irqtype.h
b/arch/arm/plat-
> samsung/include/plat/regs-irqtype.h
> deleted file mode 100644
> index c63cd3f..0000000
> --- a/arch/arm/plat-samsung/include/plat/regs-irqtype.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
> - *
> - * Copyright 2008 Simtec Electronics
> - * Ben Dooks <ben@simtec.co.uk>
> - * http://armlinux.simtec.co.uk/
> - *
> - * S3C - IRQ detection types.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -
> -/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
> - * the S3C64XX
> -*/
> -#define S3C2410_EXTINT_LOWLEV (0x00)
> -#define S3C2410_EXTINT_HILEV (0x01)
> -#define S3C2410_EXTINT_FALLEDGE (0x02)
> -#define S3C2410_EXTINT_RISEEDGE (0x04)
> -#define S3C2410_EXTINT_BOTHEDGE (0x06)
> --

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.



\
 
 \ /
  Last update: 2010-08-30 14:11    [W:0.313 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site