Messages in this thread Patch in this message | | | Date | Tue, 03 Aug 2010 12:45:00 -0700 | From | Yinghai Lu <> | Subject | Re: oops in ioapic_write_entry |
| |
On 08/03/2010 04:08 AM, Eric W. Biederman wrote: > > For the common case I think we still do the right thing, even now, for > these broken bios tables. There is likely an uncommon case for which > something like your shared_legacy_irq deserves to be used, especially > at it preserves our well tested historical behavior.
Dave, Irnna, Gary:
can you check this patch on your systems?
Thanks
Yinghai
[PATCH] x86: check if apic/pin is shared with legacy one
fix system that external device that have io apic on apic0/pin(0-15)
also for the io apic out of order system: <6>ACPI: IOAPIC (id[0x10] address[0xfecff000] gsi_base[0]) <6>IOAPIC[0]: apic_id 16, version 0, address 0xfecff000, GSI 0-2 <6>ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[3]) <6>IOAPIC[1]: apic_id 15, version 0, address 0xfec00000, GSI 3-38 <6>ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[39]) <6>IOAPIC[2]: apic_id 14, version 0, address 0xfec01000, GSI 39-74 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 4 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 5 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 6 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 7 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 6 global_irq 9 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 10 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 11 low edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 12 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 12 global_irq 15 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 13 global_irq 16 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 17 low edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 18 dfl dfl)
after this patch will get
apic0, pin0, GSI 0: irq 0+75 apic0, pin1, GSI 1: irq 1+75 apic0, pin2, GSI 2: irq 2 apic1, pin0, GSI 3: irq 3+75 apic1, pin5, GSI 8: irq 8+75 apic1, pin10,GSI 13: irq 13+75 apic1, pin11,GSI 14: irq 14+75
because mp_config_acpi_legacy_irqs will put apic0, pin2, irq2 in mp_irqs... so pin_2_irq_legacy will report 2. irq_to_gsi will still report 2. so it is right. gsi_to_irq will report 2.
for GSI 0, 1, 3, 8, 13, 14: still right as before.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
--- arch/x86/kernel/apic/io_apic.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c +++ linux-2.6/arch/x86/kernel/apic/io_apic.c @@ -1013,6 +1013,28 @@ static inline int irq_trigger(int idx) return MPBIOS_trigger(idx); } +static int pin_2_irq_leagcy(int apic, int pin) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int bus = mp_irqs[i].srcbus; + + if (!test_bit(bus, mp_bus_not_pci)) + continue; + + if (mp_ioapics[apic].apicid != mp_irqs[i].dstapic) + continue; + + if (mp_irqs[i].dstirq != pin) + continue; + + return mp_irqs[i].srcbusirq; + } + + return -1; +} + static int pin_2_irq(int idx, int apic, int pin) { int irq; @@ -1029,10 +1051,13 @@ static int pin_2_irq(int idx, int apic, } else { u32 gsi = mp_gsi_routing[apic].gsi_base + pin; - if (gsi >= NR_IRQS_LEGACY) + if (gsi >= NR_IRQS_LEGACY) { irq = gsi; - else - irq = gsi_top + gsi; + } else { + irq = pin_2_irq_legacy(apic, pin); + if (irq < 0) + irq = gsi_top + gsi; + } } #ifdef CONFIG_X86_32
| |