lkml.org 
[lkml]   [2010]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] hwmon: Fix checkpatch errors in lm90 driver
Hi Guenter,

On Thu, 26 Aug 2010 08:54:36 -0700, Guenter Roeck wrote:
> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
> ---
> The main rationale for this cleanup is to prepare the driver for adding max6696
> support.

I'm fine with mostly anything, except...

> drivers/hwmon/lm90.c | 110 +++++++++++++++++++++++++++++++++----------------
> 1 files changed, 74 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
> index 760ef72..58a5605 100644
> --- a/drivers/hwmon/lm90.c
> +++ b/drivers/hwmon/lm90.c
> @@ -387,8 +387,13 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
> struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> struct i2c_client *client = to_i2c_client(dev);
> struct lm90_data *data = i2c_get_clientdata(client);
> - long val = simple_strtol(buf, NULL, 10);
> int nr = attr->index;
> + long val;
> + int err;
> +
> + err = strict_strtol(buf, 10, &val);
> + if (err < 0)
> + return err;
>
> /* +16 degrees offset for temp2 for the LM99 */
> if (data->kind == lm99 && attr->index == 3)
> @@ -442,8 +447,13 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
> struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> struct i2c_client *client = to_i2c_client(dev);
> struct lm90_data *data = i2c_get_clientdata(client);
> - long val = simple_strtol(buf, NULL, 10);
> int nr = attr->index;
> + long val;
> + int err;
> +
> + err = strict_strtol(buf, 10, &val);
> + if (err < 0)
> + return err;
>
> /* +16 degrees offset for temp2 for the LM99 */
> if (data->kind == lm99 && attr->index <= 2)
> @@ -469,7 +479,8 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
> return count;
> }
>
> -static ssize_t show_temphyst(struct device *dev, struct device_attribute *devattr,
> +static ssize_t show_temphyst(struct device *dev,
> + struct device_attribute *devattr,
> char *buf)
> {
> struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> @@ -495,9 +506,14 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
> {
> struct i2c_client *client = to_i2c_client(dev);
> struct lm90_data *data = i2c_get_clientdata(client);
> - long val = simple_strtol(buf, NULL, 10);
> + long val;
> + int err;
> int temp;
>
> + err = strict_strtol(buf, 10, &val);
> + if (err < 0)
> + return err;
> +
> mutex_lock(&data->update_lock);
> if (data->kind == adt7461)
> temp = temp_from_u8_adt7461(data, data->temp8[2]);
> @@ -600,7 +616,12 @@ static ssize_t set_pec(struct device *dev, struct device_attribute *dummy,
> const char *buf, size_t count)
> {
> struct i2c_client *client = to_i2c_client(dev);
> - long val = simple_strtol(buf, NULL, 10);
> + long val;
> + int err;
> +
> + err = strict_strtol(buf, 10, &val);
> + if (err < 0)
> + return err;
>
> switch (val) {
> case 0:
> @@ -622,8 +643,10 @@ static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec);
> * Real code
> */
>
> -/* The ADM1032 supports PEC but not on write byte transactions, so we need
> - to explicitly ask for a transaction without PEC. */
> +/*
> + * The ADM1032 supports PEC but not on write byte transactions, so we need
> + * to explicitly ask for a transaction without PEC.
> + */
> static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
> {
> return i2c_smbus_xfer(client->adapter, client->addr,
> @@ -631,20 +654,22 @@ static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
> I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
> }
>
> -/* It is assumed that client->update_lock is held (unless we are in
> - detection or initialization steps). This matters when PEC is enabled,
> - because we don't want the address pointer to change between the write
> - byte and the read byte transactions. */
> -static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value)
> +/*
> + * It is assumed that client->update_lock is held (unless we are in
> + * detection or initialization steps). This matters when PEC is enabled,
> + * because we don't want the address pointer to change between the write
> + * byte and the read byte transactions.
> + */
> +static int lm90_read_reg(struct i2c_client *client, u8 reg, u8 *value)
> {
> int err;
>
> - if (client->flags & I2C_CLIENT_PEC) {
> - err = adm1032_write_byte(client, reg);
> - if (err >= 0)
> - err = i2c_smbus_read_byte(client);
> - } else
> - err = i2c_smbus_read_byte_data(client, reg);
> + if (client->flags & I2C_CLIENT_PEC) {
> + err = adm1032_write_byte(client, reg);
> + if (err >= 0)
> + err = i2c_smbus_read_byte(client);
> + } else
> + err = i2c_smbus_read_byte_data(client, reg);
>
> if (err < 0) {
> dev_warn(&client->dev, "Register %#02x read failed (%d)\n",
> @@ -669,14 +694,21 @@ static int lm90_detect(struct i2c_client *new_client,
> return -ENODEV;
>
> /* detection and identification */
> - if ((man_id = i2c_smbus_read_byte_data(new_client,
> - LM90_REG_R_MAN_ID)) < 0
> - || (chip_id = i2c_smbus_read_byte_data(new_client,
> - LM90_REG_R_CHIP_ID)) < 0
> - || (reg_config1 = i2c_smbus_read_byte_data(new_client,
> - LM90_REG_R_CONFIG1)) < 0
> - || (reg_convrate = i2c_smbus_read_byte_data(new_client,
> - LM90_REG_R_CONVRATE)) < 0)
> + man_id = i2c_smbus_read_byte_data(new_client, LM90_REG_R_MAN_ID);
> + if (man_id < 0)
> + return -ENODEV;
> +
> + chip_id = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CHIP_ID);
> + if (chip_id < 0)
> + return -ENODEV;
> +
> + reg_config1 = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CONFIG1);
> + if (reg_config1 < 0)
> + return -ENODEV;
> +
> + reg_convrate = i2c_smbus_read_byte_data(new_client,
> + LM90_REG_R_CONVRATE);
> + if (reg_convrate < 0)
> return -ENODEV;

... this. I think this check should be relaxed a bit, cascaded error
checking is done in many drivers and I don't think this is anything to
worry about.

No need to resend, I've just dropped the two chunks I don't like, and
applied the resulting patch. Thanks!

>
> if ((address == 0x4C || address == 0x4D)
> @@ -826,16 +858,18 @@ static int lm90_probe(struct i2c_client *new_client,
> lm90_init_client(new_client);
>
> /* Register sysfs hooks */
> - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group)))
> + err = sysfs_create_group(&new_client->dev.kobj, &lm90_group);
> + if (err)
> goto exit_free;
> if (new_client->flags & I2C_CLIENT_PEC) {
> - if ((err = device_create_file(&new_client->dev,
> - &dev_attr_pec)))
> + err = device_create_file(&new_client->dev, &dev_attr_pec);
> + if (err)
> goto exit_remove_files;
> }
> if (data->kind != max6657 && data->kind != max6646) {
> - if ((err = device_create_file(&new_client->dev,
> - &sensor_dev_attr_temp2_offset.dev_attr)))
> + err = device_create_file(&new_client->dev,
> + &sensor_dev_attr_temp2_offset.dev_attr);
> + if (err)
> goto exit_remove_files;
> }
>
> @@ -883,9 +917,8 @@ static void lm90_init_client(struct i2c_client *client)
> * 0.125 degree resolution) and range (0x08, extend range
> * to -64 degree) mode for the remote temperature sensor.
> */
> - if (data->kind == max6680) {
> + if (data->kind == max6680)
> config |= 0x18;
> - }
>
> config &= 0xBF; /* run */
> if (config != data->config_orig) /* Only write if changed */
> @@ -961,9 +994,14 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
> * we have to read the low byte again, and now we believe we have a
> * correct reading.
> */
> - if ((err = lm90_read_reg(client, regh, &oldh))
> - || (err = lm90_read_reg(client, regl, &l))
> - || (err = lm90_read_reg(client, regh, &newh)))
> + err = lm90_read_reg(client, regh, &oldh);
> + if (err)
> + return err;
> + err = lm90_read_reg(client, regl, &l);
> + if (err)
> + return err;
> + err = lm90_read_reg(client, regh, &newh);
> + if (err)
> return err;
> if (oldh != newh) {
> err = lm90_read_reg(client, regl, &l);


--
Jean Delvare


\
 
 \ /
  Last update: 2010-08-27 13:49    [W:0.043 / U:29.812 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site