lkml.org 
[lkml]   [2010]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 20/24] msm: MSM8X60 simulator board support
Date
From: Steve Muckle <smuckle@codeaurora.org>

Board configuration for MSM8X60 simulation.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
---
arch/arm/mach-msm/Kconfig | 7 +++++++
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/board-msm8x60.c | 10 +++++++++-
3 files changed, 17 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 3017e12..d2610a3 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -105,6 +105,13 @@ config MACH_MSM8X60_SURF
help
Support for the Qualcomm MSM8x60 SURF eval board.

+config MACH_MSM8X60_SIM
+ depends on ARCH_MSM8X60
+ default n
+ bool "MSM8x60 Simulator"
+ help
+ Support for the Qualcomm MSM8x60 simulator.
+
endmenu

config MSM_DEBUG_UART
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 1d62025..9fb73ab 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_MACH_MSM8X60_RUMI3) += board-msm8x60.o
obj-$(CONFIG_MACH_MSM8X60_SURF) += board-msm8x60.o
+obj-$(CONFIG_MACH_MSM8X60_SIM) += board-msm8x60.o
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index fd953c2..7a2ed7f 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -56,7 +56,8 @@ static void __init msm8x60_init_irq(void)
/* RUMI does not adhere to GIC spec by enabling STIs by default.
* Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
*/
- writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
+ if (!machine_is_msm8x60_sim())
+ writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);

/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
* as they are configured as level, which does not play nice with
@@ -85,3 +86,10 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
+
+MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_init,
+ .timer = &msm_timer,
+MACHINE_END
--
1.7.2.1
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.


\
 
 \ /
  Last update: 2010-08-25 07:21    [W:0.156 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site