lkml.org 
[lkml]   [2010]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: possible esata regression in 2.6.35
On 08/21/2010 09:13 PM, Mark Lord wrote:
> On 10-08-21 02:52 PM, Nicolas Jungers wrote:
>> My arm box doesn't succeed to use my esata port multiplier (addonics
>> sil3726 based). It was working well with 2.6.34.1 and 2.6.34.4 but not
>> with both 2.6.35.2 and 2.6.35.3. I haven't test other kernels.
>>
>> The kernels are from http://sheeva.with-linux.com/sheeva/ with for
>> example the following config
>> http://sheeva.with-linux.com/sheeva/2.6.35.3/sheeva-2.6.35.3.config
>>
>> The symptoms are in the console a loop on the esata links. Here is the
>> start of it:
>>
>> ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
>> ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect
>> ata2: SError: { PHYRdyChg DevExch }
>> ata2: hard resetting link
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
>> ata2.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
>> ata2.00: hard resetting link
>> ata2.01: hard resetting link
>> ata2.02: hard resetting link
>> ata2.03: hard resetting link
>> ata2.04: hard resetting link
>> ata2.05: hard resetting link
>> ata2.00: qc timeout (cmd 0xec)
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> ata2.15: hard resetting link
>> ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
>> ata2.00: hard resetting link
>> ata2.01: hard resetting link
>> ata2.02: hard resetting link
>> ata2.04: hard resetting link
>> ata2.05: hard resetting link
>> ata2.00: qc timeout (cmd 0xec)
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> ata2.15: hard resetting link
>> ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
>> ata2.00: hard resetting link
>> ata2.01: hard resetting link
>> ata2.02: hard resetting link
>> ata2.03: hard resetting link
>> ata2.04: hard resetting link
>> ata2.05: hard resetting link
>> ata2.00: qc timeout (cmd 0xec)
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> ata2.00: failed to recover link after 3 tries, disabling
>> ata2.15: hard resetting link
>> ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
> ...
>
> From the "edma_err" keyword above, we can deduce that you've got this PM
> plugged into a Marvell SATA controller of some kind, managed by sata_mv.
> Care to tell us more?

sorry, I'm deep into it, so it's too obvious for me. Yes, it's he
marvell plug computer (esata sheevaplug), kirkwood platform with indeed
the sata_mv module taking care of the sata port.

Start of the boot:

Linux version 2.6.35.3 (kelly@speedy) (gcc version 4.4.3 (Sourcery G++
Lite er) ) #1 PREEMPT Fri Aug 20 18:22:29 MDT 2010
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Marvell eSATA SheevaPlug Reference Board

and later:

Waiting for /dev to be fully populated...sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 21
ata2: SATA max UDMA/133 irq 21
ata1: SATA link down (SStatus 0 SControl F300)
ata2: SATA link down (SStatus 0 SControl F300)
done.

>
> There are various changes in libata in 2.6.34/35 that break sata_mv,
> particularly for ATAPI drives and any SSDs that support the DSM/TRIM
> commands.
> Do either of those two things apply in your case?

I couldn't tell, but the problem is with the port multiplier. When I
directly attach a sata drive, it works.

>
> If so, there are two pending patches which fix them.
> They were posted to linux-ide this past Thursday,
> and can also be found as attachments to this bug report:
>
> https://bugzilla.kernel.org/show_bug.cgi?id=16434

I haven't compiled a kernel in ages, but I'll try that Monday and report.

>
> Cheers

thanks,
N.


\
 
 \ /
  Last update: 2010-08-21 21:57    [W:0.716 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site