lkml.org 
[lkml]   [2010]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] MFD: switch AB3100 to use MFD cells
Date
This switches the AB3100 core driver to using MFD cells for
subdevices instead of spawning common platform devices.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
---
drivers/mfd/Kconfig | 1 +
drivers/mfd/ab3100-core.c | 129 ++++++++++++++++++++++++---------------------
2 files changed, 69 insertions(+), 61 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bfc80d6..22985d0 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -444,6 +444,7 @@ config ABX500_CORE
config AB3100_CORE
bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
depends on I2C=y && ABX500_CORE
+ select MFD_CORE
default y if ARCH_U300
help
Select this to enable the AB3100 Mixed Signal IC core
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 1be9fb6..8e84e78 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -19,6 +19,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
+#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>

/* These are the only registers inside AB3100 used in this main file */
@@ -146,7 +147,7 @@ static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
}

static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
- u8 reg, u8 *regval)
+ u8 reg, u8 *regval)
{
int err;

@@ -202,7 +203,7 @@ static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
}

static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
- u8 *value)
+ u8 *value)
{
struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);

@@ -742,52 +743,64 @@ static int __devinit ab3100_setup(struct ab3100 *ab3100)
return err;
}

-/*
- * Here we define all the platform devices that appear
- * as children of the AB3100. These are regular platform
- * devices with the IORESOURCE_IO .start and .end set
- * to correspond to the internal AB3100 register range
- * mapping to the corresponding subdevice.
- */
-
-#define AB3100_DEVICE(devname, devid) \
-static struct platform_device ab3100_##devname##_device = { \
- .name = devid, \
- .id = -1, \
-}
-
-/* This lists all the subdevices */
-AB3100_DEVICE(dac, "ab3100-dac");
-AB3100_DEVICE(leds, "ab3100-leds");
-AB3100_DEVICE(power, "ab3100-power");
-AB3100_DEVICE(regulators, "ab3100-regulators");
-AB3100_DEVICE(sim, "ab3100-sim");
-AB3100_DEVICE(uart, "ab3100-uart");
-AB3100_DEVICE(rtc, "ab3100-rtc");
-AB3100_DEVICE(charger, "ab3100-charger");
-AB3100_DEVICE(boost, "ab3100-boost");
-AB3100_DEVICE(adc, "ab3100-adc");
-AB3100_DEVICE(fuelgauge, "ab3100-fuelgauge");
-AB3100_DEVICE(vibrator, "ab3100-vibrator");
-AB3100_DEVICE(otp, "ab3100-otp");
-AB3100_DEVICE(codec, "ab3100-codec");
-
-static struct platform_device *
-ab3100_platform_devs[] = {
- &ab3100_dac_device,
- &ab3100_leds_device,
- &ab3100_power_device,
- &ab3100_regulators_device,
- &ab3100_sim_device,
- &ab3100_uart_device,
- &ab3100_rtc_device,
- &ab3100_charger_device,
- &ab3100_boost_device,
- &ab3100_adc_device,
- &ab3100_fuelgauge_device,
- &ab3100_vibrator_device,
- &ab3100_otp_device,
- &ab3100_codec_device,
+/* The subdevices of the AB3100 */
+static struct mfd_cell ab3100_devs[] = {
+ {
+ .name = "ab3100-dac",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-leds",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-power",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-regulators",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-sim",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-uart",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-rtc",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-charger",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-boost",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-adc",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-fuelgauge",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-vibrator",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-otp",
+ .id = -1,
+ },
+ {
+ .name = "ab3100-codec",
+ .id = -1,
+ },
};

struct ab_family_id {
@@ -934,18 +947,14 @@ static int __devinit ab3100_probe(struct i2c_client *client,
if (err)
goto exit_no_ops;

- /* Set parent and a pointer back to the container in device data */
- for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
- ab3100_platform_devs[i]->dev.parent =
- &client->dev;
- ab3100_platform_devs[i]->dev.platform_data =
- ab3100_plf_data;
- platform_set_drvdata(ab3100_platform_devs[i], ab3100);
+ /* Set up and register the platform devices. */
+ for (i = 0; i < ARRAY_SIZE(ab3100_devs); i++) {
+ ab3100_devs[i].platform_data = ab3100_plf_data;
+ ab3100_devs[i].data_size = sizeof(struct ab3100_platform_data);
}

- /* Register the platform devices */
- platform_add_devices(ab3100_platform_devs,
- ARRAY_SIZE(ab3100_platform_devs));
+ err = mfd_add_devices(&client->dev, 0, ab3100_devs,
+ ARRAY_SIZE(ab3100_devs), NULL, 0);

ab3100_setup_debugfs(ab3100);

@@ -964,11 +973,9 @@ static int __devinit ab3100_probe(struct i2c_client *client,
static int __devexit ab3100_remove(struct i2c_client *client)
{
struct ab3100 *ab3100 = i2c_get_clientdata(client);
- int i;

/* Unregister subdevices */
- for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++)
- platform_device_unregister(ab3100_platform_devs[i]);
+ mfd_remove_devices(&client->dev);

ab3100_remove_debugfs();
i2c_unregister_device(ab3100->testreg_client);
--
1.6.3.3


\
 
 \ /
  Last update: 2010-08-20 10:29    [W:0.034 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site