lkml.org 
[lkml]   [2010]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: BUG: IPv6 stops working after a while, needs ip ne del command to reset
On Tue, Aug 17, 2010 at 10:29:54AM -0700, Thomas Habets wrote:
> On Tue, 17 Aug 2010, Matt Carlson wrote:
> >>> But if problem remains even with "ifconfig eth0 allmulti" I suspect a
> >>> NIC firmware problem. (allmulti set to 1 all the 128 bits of filters)
> > Thomas, can you give me the output of 'ethtool -i eth0'?
>
> $ sudo ethtool -i eth0
> driver: tg3
> version: 3.110
> firmware-version: 5715-v3.28, UMP 1.15
> bus-info: 0000:03:04.0

Thanks. I put the question out to the firmware developer. While we
wait, can you keep Eric's patch in place and give me the results along
with the output of 'ethtool -d eth0 | grep 0x047' after the problem
happens?

Eric's patch shows the hash registers at the time they are programmed.
I'm interested to see if the values change (by firmware) after the
failure.



\
 
 \ /
  Last update: 2010-08-17 20:33    [W:0.060 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site