lkml.org 
[lkml]   [2010]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Intel graphics CPU usage - SDVO detect bogosity?
From
Date
On Sun, 2010-08-15 at 21:01 -0700, Linus Torvalds wrote:
> On Sun, Aug 15, 2010 at 8:30 PM, Dave Airlie <airlied@redhat.com> wrote:
> >
> > At least we should replace mdelay with msleep in those functions.
>
> How precise does the timing have to be? I think i2c is self-clocking,
> so it's ok to see big skews? Becuase msleep() can be off by quite a
> bit (mdelay can too, but it's _way_ more rare, and requires either a
> preemptible kernel or serious interrupt activity).

In this case it definitely doesn't matter, I expect msleep to be a much
nicer to the system in general idea esp in routines we can all at
runtime from userspace.

>
> > Can you get a boot with drm.debug=4?
>
> Sure. That results in a truncated dmesg (with a 128k buffer). The
> thing seems to spew out something every ten seconds:
>
> ...
> [ 232.610044] [drm:intel_sdvo_debug_write], SDVOB: W: 0B
> (SDVO_CMD_GET_ATTACHED_DISPLAYS)
> [ 232.624504] [drm:intel_sdvo_debug_response], SDVOB: R: 01 00
> (Success)
> [ 232.624517] [drm:intel_sdvo_detect], SDVO response 1 0
> [ 232.624524] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 01
> (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> [ 242.672044] [drm:intel_sdvo_debug_write], SDVOB: W: 0B
> (SDVO_CMD_GET_ATTACHED_DISPLAYS)
> [ 242.686503] [drm:intel_sdvo_debug_response], SDVOB: R: 01 00
> (Success)
> [ 242.686516] [drm:intel_sdvo_detect], SDVO response 1 0
> [ 242.686523] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 01
> (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
> [ 252.750044] [drm:intel_sdvo_debug_write], SDVOB: W: 0B
> (SDVO_CMD_GET_ATTACHED_DISPLAYS)
> [ 252.764526] [drm:intel_sdvo_debug_response], SDVOB: R: 01 00
> (Success)
> [ 252.764539] [drm:intel_sdvo_detect], SDVO response 1 0
> ...
>
> It looks like it takes about 15 ms each time. But 15 ms each 10s
> doesn't seem to be enough to account for the load average. Maybe it
> gets synchronized with the timer tick or something, causing the load
> average to look artificially inflated (it also doesn't match up with
> kworker using 1%+ CPU time).
>
> So maybe there is something else going on. Maybe the load average
> thing comes from some interaction with the new workqueue thing.
>
> I'll send the whole dmesg to you in a private message, I don't think
> we want 128kB of crud on lkml.
>
> > I wonder are we picking up a bad SDVO, the insane code retries 50 times
> > with a hard loop delay.
>
> Well, I'm not seeing any failures, but maybe those don't get printed out?

Oh wierd, so not where I thought it was, I expect then the SDVO HDMI
detection is completely insane,

intel_sdvo_hdmi_sink_detect looks to contain some really uninspiring
code. Might be worth adding some debug in there to see if it sinks a lot
of time.

Dave.



\
 
 \ /
  Last update: 2010-08-16 06:31    [W:0.600 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site