Messages in this thread | | | Date | Fri, 13 Aug 2010 10:07:36 +0200 | From | Marc Haber <> | Subject | Re: e1000e crashes with 2.6.34.x and ThinkPad T60 |
| |
On Fri, Aug 13, 2010 at 03:25:51AM +0200, Marc Haber wrote: > On Tue, Aug 10, 2010 at 09:34:52AM -0700, Allan, Bruce W wrote: > > We have had other recent reports of issues with this part that are due to > > ASPM L1 being enabled. Would you please try disabling L1 after the driver > > is loaded as follows (assuming your adapter is still PCI bus/device/number > > 02:00.0 as indicated in the lspci output you provided earlier): > > 1) First check the hexadecimal value of the LnkCtl register - > > # setpci -s 2:0.0 0xf0 > > 2) Disable ASPM (both L0s and L1) by zeroing out bits 0 and 1 in the value > > returned by the previous step. For example, if it returned 42 (hex 42, > > that is) - > > # setpci -s 2:0.0 0xf0=0x40 > > 3) Confirm ASPM is disabled by checking the output from lspci again. > > It returned 42, and after setting 0x40, LnkCtl now says "ASPM Disabled". > > I'll dock the system now and will report after the weekend or after > the first crash.
Didn't work, freeze within the first 60 minutes after starting serious work. The system did sit idle for the night though without freezing.
Greetings Marc
-- ----------------------------------------------------------------------------- Marc Haber | "I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things." Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 3221 2323190
| |