lkml.org 
[lkml]   [2010]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG] object: is not initialized, yet kobject_put() is being called
On Thu, 12 Aug 2010, Markus Trippelsdorf wrote:

> > > > Guys, could you please send me your .config with which you are
> > > > experiencing the problem, so that I can try to reproduce it with it?
> > >
> > > Attached.
> >
> > So I had to add support for HW of mine (SATA_VIA, PATA_VIA, disabled the
> > radeon firmware stuff, and, most importantly, enabled UHCI, which is what
> > is on machine I am using now for testing), and disconnect-connect cycle
> > works nicely:
> >
> > usb 3-2: USB disconnect, address 3
> > usb 3-2: new low speed USB device using uhci_hcd and address 4
> > input: mouse USB mouse with wheel as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input6
> > generic-usb 0003:05B8:3091.0004: input,hidraw0: USB HID v1.10 Mouse [mouse USB mouse with wheel] on usb-0000:00:10.1-2/input0
> > input: mouse USB mouse with wheel as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input7
> > generic-usb 0003:05B8:3091.0005: input,hidraw1: USB HID v1.10 Keyboard [mouse USB mouse with wheel] on usb-0000:00:10.1-2/input1
> >
> > so still no BUG from kobject refcounting, and the hidraw numbers are the
> > same. The major difference seems to be that I am using UHCI and you have
> > your HID devices connected through OHCI, is that correct?
>
> Correct. And I should add that it very easy to reproduce here; just
> disconnecting the usb receiver triggers the WARNING.

Hmm ... there is a certain interface of the device which doesn't get
connected to input, right? (0003:046D:C52B.0008).

What happens if you compile without CONFIG_HIDRAW and/or
CONFIG_USB_HIDDEV?

--
Jiri Kosina
SUSE Labs, Novell Inc.


\
 
 \ /
  Last update: 2010-08-12 13:59    [W:0.444 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site