Messages in this thread Patch in this message | | | Date | Wed, 11 Aug 2010 17:06:04 -0700 | From | Greg KH <> | Subject | [49/67] USB: serial: enabling support for Segway RMP in ftdi_sio |
| |
2.6.35-stable review patch. If anyone has any objections, please let us know.
------------------
From: John G. Rogers <jgrogers@gmail.com>
commit afad19648f70c6493193e0a774bd754b7790b4a0 upstream.
I have added the ProductID=0xe729 VendorID=FTDI_VID=0x0403 which will enable support for the Segway Robotic Mobility Platform (RMP200) in the ftdi_sio kernel module. Currently, users of the Segway RMP200 must use a RUN+="/sbin/modprobe -q ftdi-sio product=0xe729 vendor=0x0403 in a udev rule to get the ftdi_sio module to handle the usb interface and mount it on /dev/ttyXXX. This is not a good solution because some users will have multiple USB to Serial converters which will use the ftdi_sio module.
Signed-off-by: John Rogers <jgrogers@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
--- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 5 +++++ 2 files changed, 6 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -746,6 +746,7 @@ static struct usb_device_id id_table_com .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1032,3 +1032,8 @@ #define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 #define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 +/* + * Segway Robotic Mobility Platform USB interface (using VID 0x0403) + * Submitted by John G. Rogers + */ +#define SEGWAY_RMP200_PID 0xe729
| |