lkml.org 
[lkml]   [2010]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH 3/5] scsi: megaraid_sas - Add input parameter for max_sectors
From
Driver add the input parameters support for max_sectors for our gen2
chip. Customer can
Set the max_sectors support to 1MB for gen2 chip during the driver load.

Signed-off-by Bo Yang<bo.yang@lsi.com>

---
drivers/scsi/megaraid/megaraid_sas.c | 30 ++++++++++++++++++++++++++++++
drivers/scsi/megaraid/megaraid_sas.h | 1 +
2 files changed, 31 insertions(+)

diff -rupN old/drivers/scsi/megaraid/megaraid_sas.c
new/drivers/scsi/megaraid/megaraid_sas.c
--- old/drivers/scsi/megaraid/megaraid_sas.c 2010-08-08 02:30:29.000000000 -0400
+++ new/drivers/scsi/megaraid/megaraid_sas.c 2010-08-10 04:24:26.000000000 -0400
@@ -57,6 +57,15 @@ module_param_named(poll_mode_io, poll_mo
MODULE_PARM_DESC(poll_mode_io,
"Complete cmds from IO path, (default=0)");

+/*
+ * Number of sectors per IO command
+ * Will be set in megasas_init_mfi if user does not provide
+ */
+static unsigned int max_sectors;
+module_param_named(max_sectors, max_sectors, int, 0);
+MODULE_PARM_DESC(max_sectors,
+ "Maximum number of sectors per IO command");
+
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGASAS_VERSION);
MODULE_AUTHOR("megaraidlinux@lsi.com");
@@ -3588,6 +3597,27 @@ static int megasas_io_attach(struct mega
instance->max_fw_cmds - MEGASAS_INT_CMDS;
host->this_id = instance->init_id;
host->sg_tablesize = instance->max_num_sge;
+ /*
+ * Check if the module parameter value for max_sectors can be used
+ */
+ if (max_sectors && max_sectors < instance->max_sectors_per_req)
+ instance->max_sectors_per_req = max_sectors;
+ else {
+ if (max_sectors) {
+ if (((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0079GEN2)) &&
+ (max_sectors <= MEGASAS_MAX_SECTORS)) {
+ instance->max_sectors_per_req = max_sectors;
+ } else {
+ printk(KERN_INFO "megasas: max_sectors should be > 0"
+ "and <= %d (or < 1MB for GEN2 controller)\n",
+ instance->max_sectors_per_req);
+ }
+ }
+ }
+
host->max_sectors = instance->max_sectors_per_req;
host->cmd_per_lun = 128;
host->max_channel = MEGASAS_MAX_CHANNELS - 1;
diff -rupN old/drivers/scsi/megaraid/megaraid_sas.h
new/drivers/scsi/megaraid/megaraid_sas.h
--- old/drivers/scsi/megaraid/megaraid_sas.h 2010-08-08 02:30:29.000000000 -0400
+++ new/drivers/scsi/megaraid/megaraid_sas.h 2010-08-10 04:20:35.000000000 -0400
@@ -706,6 +706,7 @@ struct megasas_ctrl_info {
#define MEGASAS_MAX_LD_IDS (MEGASAS_MAX_LD_CHANNELS * \
MEGASAS_MAX_DEV_PER_CHANNEL)

+#define MEGASAS_MAX_SECTORS (2*1024)
#define MEGASAS_DBG_LVL 1

#define MEGASAS_FW_BUSY 1

\
 
 \ /
  Last update: 2010-08-11 23:05    [W:0.703 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site