lkml.org 
[lkml]   [2010]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[078/140] serial: cpm_uart: implement the cpm_uart_early_write() function for console poll
2.6.33-stable review patch.  If anyone has any objections, please let us know.

------------------
From: Dongdong Deng <dongdong.deng@windriver.com>

commit 8cd774ad30c22b9d89823f1f05d845f4cdaba9e8 upstream.

The cpm_uart_early_write() function which was used for console poll
isn't implemented in the cpm uart driver.

Implementing this function both fixes the build when CONFIG_CONSOLE_POLL
is set and allows kgdboc to work via the cpm uart.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/serial/cpm_uart/cpm_uart_core.c | 143 +++++++++++++++++---------------
1 file changed, 79 insertions(+), 64 deletions(-)
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct
}
}

+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE)
+/*
+ * Write a string to the serial port
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
+ const char *string, u_int count)
+{
+ unsigned int i;
+ cbd_t __iomem *bdp, *bdbase;
+ unsigned char *cpm_outp_addr;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = pinfo->tx_cur;
+ bdbase = pinfo->tx_bd_base;
+
+ /*
+ * Now, do each character. This is not as bad as it looks
+ * since this is a holding FIFO and not a transmitting FIFO.
+ * We could add the complexity of filling the entire transmit
+ * buffer, but we would just wait longer between accesses......
+ */
+ for (i = 0; i < count; i++, string++) {
+ /* Wait for transmitter fifo to empty.
+ * Ready indicates output is ready, and xmt is doing
+ * that, not that it is ready for us to send.
+ */
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ /* Send the character out.
+ * If the buffer address is in the CPM DPRAM, don't
+ * convert it.
+ */
+ cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+ pinfo);
+ *cpm_outp_addr = *string;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+
+ /* if a LF, also do CR... */
+ if (*string == 10) {
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+ pinfo);
+ *cpm_outp_addr = 13;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+ }
+ }
+
+ /*
+ * Finally, Wait for transmitter & holding register to empty
+ * and restore the IER
+ */
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ pinfo->tx_cur = bdp;
+}
+#endif
+
#ifdef CONFIG_CONSOLE_POLL
/* Serial polling routines for writing and reading from the uart while
* in an interrupt or debug context.
@@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uar
static char ch[2];

ch[0] = (char)c;
- cpm_uart_early_write(pinfo->port.line, ch, 1);
+ cpm_uart_early_write(pinfo, ch, 1);
}
#endif /* CONFIG_CONSOLE_POLL */

@@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struc
u_int count)
{
struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
- unsigned int i;
- cbd_t __iomem *bdp, *bdbase;
- unsigned char *cp;
unsigned long flags;
int nolock = oops_in_progress;

@@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struc
spin_lock_irqsave(&pinfo->port.lock, flags);
}

- /* Get the address of the host memory buffer.
- */
- bdp = pinfo->tx_cur;
- bdbase = pinfo->tx_bd_base;
-
- /*
- * Now, do each character. This is not as bad as it looks
- * since this is a holding FIFO and not a transmitting FIFO.
- * We could add the complexity of filling the entire transmit
- * buffer, but we would just wait longer between accesses......
- */
- for (i = 0; i < count; i++, s++) {
- /* Wait for transmitter fifo to empty.
- * Ready indicates output is ready, and xmt is doing
- * that, not that it is ready for us to send.
- */
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- /* Send the character out.
- * If the buffer address is in the CPM DPRAM, don't
- * convert it.
- */
- cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- *cp = *s;
-
- out_be16(&bdp->cbd_datlen, 1);
- setbits16(&bdp->cbd_sc, BD_SC_READY);
-
- if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
- bdp = bdbase;
- else
- bdp++;
-
- /* if a LF, also do CR... */
- if (*s == 10) {
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- *cp = 13;
-
- out_be16(&bdp->cbd_datlen, 1);
- setbits16(&bdp->cbd_sc, BD_SC_READY);
-
- if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
- bdp = bdbase;
- else
- bdp++;
- }
- }
-
- /*
- * Finally, Wait for transmitter & holding register to empty
- * and restore the IER
- */
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- pinfo->tx_cur = bdp;
+ cpm_uart_early_write(pinfo, s, count);

if (unlikely(nolock)) {
local_irq_restore(flags);



\
 
 \ /
  Last update: 2010-07-30 19:57    [from the cache]
©2003-2011 Jasper Spaans