lkml.org 
[lkml]   [2010]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH repost] sched: export sched_set/getaffinity to modules
From
Date
On Mon, 2010-07-26 at 20:12 +0300, Michael S. Tsirkin wrote:
> On Fri, Jul 02, 2010 at 11:06:37PM +0200, Oleg Nesterov wrote:
> > On 07/02, Peter Zijlstra wrote:
> > >
> > > On Fri, 2010-07-02 at 11:01 -0700, Sridhar Samudrala wrote:
> > > >
> > > > Does it (Tejun's kthread_clone() patch) also inherit the
> > > > cgroup of the caller?
> > >
> > > Of course, its a simple do_fork() which inherits everything just as you
> > > would expect from a similar sys_clone()/sys_fork() call.
> >
> > Yes. And I'm afraid it can inherit more than we want. IIUC, this is called
> > from ioctl(), right?
> >
> > Then the new thread becomes the natural child of the caller, and it shares
> > ->mm with the parent. And files, dup_fd() without CLONE_FS.
> >
> > Signals. Say, if you send SIGKILL to this new thread, it can't sleep in
> > TASK_INTERRUPTIBLE or KILLABLE after that. And this SIGKILL can be sent
> > just because the parent gets SIGQUIT or abother coredumpable signal.
> > Or the new thread can recieve SIGSTOP via ^Z.
> >
> > Perhaps this is OK, I do not know. Just to remind that kernel_thread()
> > is merely clone(CLONE_VM).
> >
> > Oleg.
>
> With some machinery to stop it later, yes.
> Oleg, how does the below look to you?
>
> Here I explicitly drop the fds so we don't share them.
> CLONE_VM takes care of sharing the mm I think.
> About signals - for the vhost-net use this is OK as we use
> uninterruptible sleep anyway (like the new kthread_worker does).
>
> This code seems to work fine for me so far - any comments?
>
> ---
>
> diff --git a/include/linux/kthread.h b/include/linux/kthread.h
> index aabc8a1..72c7b17 100644
> --- a/include/linux/kthread.h
> +++ b/include/linux/kthread.h
> @@ -9,6 +9,11 @@ struct task_struct *kthread_create(int (*threadfn)(void *data),
> const char namefmt[], ...)
> __attribute__((format(printf, 3, 4)));
>
> +struct task_struct *kthread_create_inherit(int (*threadfn)(void *data),
> + void *data,
> + const char namefmt[], ...)
> + __attribute__((format(printf, 3, 4)));
> +
> /**
> * kthread_run - create and wake a thread.
> * @threadfn: the function to run until signal_pending(current).
> diff --git a/kernel/kthread.c b/kernel/kthread.c
> index 83911c7..b81588c 100644
> --- a/kernel/kthread.c
> +++ b/kernel/kthread.c
> @@ -149,6 +149,38 @@ struct task_struct *kthread_create(int (*threadfn)(void *data),
> }
> EXPORT_SYMBOL(kthread_create);
>
> +/* Same as kthread_create, but inherit attributes (cgroups, priority, CPU mask)
> + * from current. */
> +struct task_struct *kthread_create_inherit(int (*threadfn)(void *data),
> + void *data,
> + const char namefmt[],
> + ...)
> +{
> + struct kthread_create_info create;
> +
> + create.threadfn = threadfn;
> + create.data = data;
> + init_completion(&create.done);
> +
> + create_kthread(&create);
> + wait_for_completion(&create.done);
> +
> + if (!IS_ERR(create.result)) {
> + va_list args;
> +
> + /* Don't share files with parent as drivers use release for
> + * close on exit, etc. */
> + exit_files(create.result);
> +
> + va_start(args, namefmt);
> + vsnprintf(create.result->comm, sizeof(create.result->comm),
> + namefmt, args);
> + va_end(args);
> + }
> + return create.result;
> +}
> +EXPORT_SYMBOL(kthread_create_inherit);
> +
> /**
> * kthread_bind - bind a just-created kthread to a cpu.
> * @p: thread created by kthread_create().


I have been testing out a similar patch that uses kernel_thread() without CLONE_FILES
flag rather than create_kthread() and then closing the files.
Either version should be fine.

diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index aabc8a1..634eaf7 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -9,6 +9,11 @@ struct task_struct *kthread_create(int (*threadfn)(void *data),
const char namefmt[], ...)
__attribute__((format(printf, 3, 4)));

+struct task_struct *kthread_clone(int (*threadfn)(void *data),
+ void *data,
+ const char namefmt[], ...)
+ __attribute__((format(printf, 3, 4)));
+
/**
* kthread_run - create and wake a thread.
* @threadfn: the function to run until signal_pending(current).
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 83911c7..806dae5 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -149,6 +149,38 @@ struct task_struct *kthread_create(int (*threadfn)(void *data),
}
EXPORT_SYMBOL(kthread_create);

+struct task_struct *kthread_clone(int (*threadfn)(void *data),
+ void *data,
+ const char namefmt[],
+ ...)
+{
+ struct kthread_create_info create;
+ int pid;
+
+ create.threadfn = threadfn;
+ create.data = data;
+ init_completion(&create.done);
+ INIT_LIST_HEAD(&create.list);
+
+ pid = kernel_thread(kthread, &create, CLONE_FS);
+ if (pid < 0) {
+ create.result = ERR_PTR(pid);
+ complete(&create.done);
+ }
+ wait_for_completion(&create.done);
+
+ if (!IS_ERR(create.result)) {
+ va_list args;
+ va_start(args, namefmt);
+ vsnprintf(create.result->comm, sizeof(create.result->comm),
+ namefmt, args);
+ va_end(args);
+ }
+
+ return create.result;
+}
+EXPORT_SYMBOL(kthread_clone);
+
/**
* kthread_bind - bind a just-created kthread to a cpu.
* @p: thread created by kthread_create().






\
 
 \ /
  Last update: 2010-07-26 19:55    [W:0.318 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site