lkml.org 
[lkml]   [2010]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/49] x86, numa: fix boot without RAM on node0 again
Date
|commit e534c7c5f8d6e9fc46f57fab067c7e48d8ceb172
|Author: Lee Schermerhorn <lee.schermerhorn@hp.com>
|Date: Wed May 26 14:44:58 2010 -0700
|
| numa: x86_64: use generic percpu var numa_node_id() implementation
|
| x86 arch specific changes to use generic numa_node_id() based on generic
| percpu variable infrastructure. Back out x86's custom version of
| numa_node_id()

broke numa system that doesn't have ram on node0 when MEMORY_HOTPLUG is enabled.

because cpu_up() will call cpu_to_node() before per_cpu(numa_node) is setup for
APs.

When Node0 doesn't have RAM, on x86, cpus already round it to nearest node with
RAM in x86_cpu_to_node_map. and per_cpu(numa_node) is not set up until in c_init for APs.

when later cpu_up() calling cpu_to_node() will get 0 again, and make it online
even there is no RAM on node0. so later all APs can not booted up, and later
will have panic.

[ 1.611101] On node 0 totalpages: 0
.........
[ 2.608558] On node 0 totalpages: 0
[ 2.612065] Brought up 1 CPUs
[ 2.615199] Total of 1 processors activated (3990.31 BogoMIPS).
...
93.225341] calling loop_init+0x0/0x1a4 @ 1
[ 93.229314] PERCPU: allocation failed, size=80 align=8, failed to populate
[ 93.246539] Pid: 1, comm: swapper Tainted: G W 2.6.35-rc4-tip-yh-04371-gd64e6c4-dirty #354
[ 93.264621] Call Trace:
[ 93.266533] [<ffffffff81125e43>] pcpu_alloc+0x83a/0x8e7
[ 93.270710] [<ffffffff81125f15>] __alloc_percpu+0x10/0x12
[ 93.285849] [<ffffffff8140786c>] alloc_disk_node+0x94/0x16d
[ 93.291811] [<ffffffff81407956>] alloc_disk+0x11/0x13
[ 93.306157] [<ffffffff81503e51>] loop_alloc+0xa7/0x180
[ 93.310538] [<ffffffff8277ef48>] loop_init+0x9b/0x1a4
[ 93.324909] [<ffffffff8277eead>] ? loop_init+0x0/0x1a4
[ 93.329650] [<ffffffff810001f2>] do_one_initcall+0x57/0x136
[ 93.345197] [<ffffffff827486d0>] kernel_init+0x184/0x20e
[ 93.348146] [<ffffffff81034954>] kernel_thread_helper+0x4/0x10
[ 93.365194] [<ffffffff81c7cc3c>] ? restore_args+0x0/0x30
[ 93.369305] [<ffffffff8274854c>] ? kernel_init+0x0/0x20e
[ 93.386011] [<ffffffff81034950>] ? kernel_thread_helper+0x0/0x10
[ 93.392047] loop: out of memory
...
Try to assign per_cpu(numa_node) early

Signed-off-by: Yinghai <yinghai@kernel.org>
---
arch/x86/kernel/setup_percpu.c | 17 +++++++++--------
1 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index de3b63a..b03959c 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -238,6 +238,15 @@ void __init setup_per_cpu_areas(void)
#ifdef CONFIG_NUMA
per_cpu(x86_cpu_to_node_map, cpu) =
early_per_cpu_map(x86_cpu_to_node_map, cpu);
+ /*
+ * make sure boot cpu numa_node is right, when boot cpu is on
+ * the node that doesn't have mem installed
+ * also cpu_up() will call cpu_to_node() for APs when
+ * MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
+ * up later with c_init aka intel_init/amd_init
+ * So set them all (boot cpu and all APs)
+ */
+ set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
#endif
#endif
/*
@@ -257,14 +266,6 @@ void __init setup_per_cpu_areas(void)
early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
#endif

-#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
- /*
- * make sure boot cpu numa_node is right, when boot cpu is on the
- * node that doesn't have mem installed
- */
- set_cpu_numa_node(boot_cpu_id, early_cpu_to_node(boot_cpu_id));
-#endif
-
/* Setup node to cpumask map */
setup_node_to_cpumask_map();

--
1.6.4.2


\
 
 \ /
  Last update: 2010-07-20 02:01    [from the cache]
©2003-2011 Jasper Spaans