lkml.org 
[lkml]   [2010]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] net/nuc900: enable Mac driver clock
This patch fixed a bug that Mac driver does not work,because I missed the clk enable.

I have ever tested the driver when I submitted previous Mac driver patch,
and it worked good, since my bootloader has enabled the clock in advance.

But when I try to use other bootloader where clock engine was disabled,the
Mac driver does not work, so I send this patch to fix this issue.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>

---
drivers/net/arm/w90p910_ether.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c
index 2e85246..4545d5a 100644
--- a/drivers/net/arm/w90p910_ether.c
+++ b/drivers/net/arm/w90p910_ether.c
@@ -822,6 +822,9 @@ static int w90p910_ether_open(struct net_device *dev)
w90p910_set_global_maccmd(dev);
w90p910_enable_rx(dev, 1);

+ clk_enable(ether->rmiiclk);
+ clk_enable(ether->clk);
+
ether->rx_packets = 0x0;
ether->rx_bytes = 0x0;

--
1.6.3.3

\
 
 \ /
  Last update: 2010-07-14 11:51    [W:0.072 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site