lkml.org 
[lkml]   [2010]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
Hi Kevin,

Thanks for posting this driver.

Adding Jean Delvar for i2c bits.

On 7/13/2010 2:26 AM, Kevin McNeely wrote:
> From: Fred <fwk@ubuntu.linuxcertified.com>

E-mail id looks wrong. Do you mean fwk@cypress.com?

>
> This is a new touchscreen driver for the Cypress Semiconductor
> cyttsp family of devices. This driver is for the i2c version
> of cyttsp parts.

Please explain in commit text which exact version of the chips this driver is supporting.
It is hard to make out that from this text.
>
> Signed-off-by: Kevin McNeely <kev@cypress.com>
> ---
> drivers/input/touchscreen/Kconfig | 13 +
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/cyttsp-i2c.c | 2016 ++++++++++++++++++++++++++++++++
> include/linux/cyttsp.h | 649 ++++++++++

Please move this file to include/linux/input directory.


>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 3b9d5e2..a7a69a0 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -603,4 +603,17 @@ config TOUCHSCREEN_TPS6507X
> To compile this driver as a module, choose M here: the
> module will be called tps6507x_ts.
>
> +config TOUCHSCREEN_CYTTSP_I2C
> + default n

Do we need to provide this if it is no by default?

> + tristate "Cypress TTSP i2c touchscreen"
> + depends on I2C
> + help
> + Say Y here if you have a Cypress TTSP touchscreen
> + connected to your system's i2c bus.

What is TTSP?

> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called cyttsp_i2c.
> +
> endif


> diff --git a/drivers/input/touchscreen/cyttsp-i2c.c b/drivers/input/touchscreen/cyttsp-i2c.c
> new file mode 100644
> index 0000000..8397aa1
> --- /dev/null
> +++ b/drivers/input/touchscreen/cyttsp-i2c.c
> @@ -0,0 +1,2016 @@
> +/* Source for:
> + * Cypress TrueTouch(TM) Standard Product I2C touchscreen driver.
> + * drivers/input/touchscreen/cyttsp-i2c.c

No file paths please. Already commented on it by Christoph.

> + *
> + * Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2, and only version 2, as published by the
> + * Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> + *
> + * Cypress reserves the right to make changes without further notice
> + * to the materials described herein. Cypress does not assume any
> + * liability arising out of the application described herein.
> + *
> + * Contact Cypress Semiconductor at www.cypress.com

I would like Dmitry to comment on it. Dmitry?

> + *
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/slab.h>
> +#include <linux/gpio.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/timer.h>
> +#include <linux/workqueue.h>
> +#include <linux/byteorder/generic.h>
> +#include <linux/bitops.h>
> +#ifdef CONFIG_HAS_EARLYSUSPEND
> +#include <linux/earlysuspend.h>
> +#endif /* CONFIG_HAS_EARLYSUSPEND */

We don't have early suspend support yet into the mainline kernel. Please remove this code from the driver.

> +
> +#define CY_DECLARE_GLOBALS

Could you please explain what it does?

> +
> +#include <linux/cyttsp.h>
> +
> +uint32_t cyttsp_tsdebug1 = 0xff;
> +module_param_named(tsdebug1, cyttsp_tsdebug1, uint, 0664);
> +
> +/* CY TTSP I2C Driver private data */
> +struct cyttsp {
> + struct i2c_client *client;
> + struct input_dev *input;
> + struct work_struct work;
> + struct timer_list timer;
> + struct mutex mutex;
> + char phys[32];
> + struct cyttsp_platform_data *platform_data;
> + u8 num_prv_st_tch;
> + u16 act_trk[CY_NUM_TRK_ID];
> + u16 prv_st_tch[CY_NUM_ST_TCH_ID];
> + u16 prv_mt_tch[CY_NUM_MT_TCH_ID];
> + u16 prv_mt_pos[CY_NUM_TRK_ID][2];
> + atomic_t irq_enabled;
> +#ifdef CONFIG_HAS_EARLYSUSPEND
> + struct early_suspend early_suspend;
> +#endif /* CONFIG_HAS_EARLYSUSPEND */
> +};
> +static u8 irq_cnt; /* comparison counter with register valuw */

s/valuw/value

> +static u32 irq_cnt_total; /* total interrupts */
> +static u32 irq_err_cnt; /* count number of touch interrupts with err */
> +#define CY_IRQ_CNT_MASK 0x000000FF /* mapped for sizeof count in reg */
> +#define CY_IRQ_CNT_REG 0x00 /* tt_undef[0]=reg 0x1B - Gen3 only */
> +
> +#ifdef CONFIG_HAS_EARLYSUSPEND
> +static void cyttsp_early_suspend(struct early_suspend *handler);
> +static void cyttsp_late_resume(struct early_suspend *handler);
> +#endif /* CONFIG_HAS_EARLYSUSPEND */
> +
> +static struct workqueue_struct *cyttsp_ts_wq;

Why there are so many global variables lying around?

> +
> +
> +/* ****************************************************************************
> + * Prototypes for static functions
> + * ************************************************************************** */
> +static void cyttsp_xy_worker(struct work_struct *work);
> +static irqreturn_t cyttsp_irq(int irq, void *handle);
> +static int cyttsp_inlist(u16 prev_track[],
> + u8 cur_trk_id, u8 *prev_loc, u8 num_touches);
> +static int cyttsp_next_avail_inlist(u16 cur_trk[],
> + u8 *new_loc, u8 num_touches);
> +static int cyttsp_putbl(struct cyttsp *ts, int show,
> + int show_status, int show_version, int show_cid);
> +static int __devinit cyttsp_probe(struct i2c_client *client,
> + const struct i2c_device_id *id);
> +static int __devexit cyttsp_remove(struct i2c_client *client);
> +static int cyttsp_resume(struct i2c_client *client);
> +static int cyttsp_suspend(struct i2c_client *client, pm_message_t message);

Please re-order the functions in the driver such a way so that you don't need have these prototypes here.

> +
> +/* Static variables */
> +static struct cyttsp_gen3_xydata_t g_xy_data;
> +static struct cyttsp_bootloader_data_t g_bl_data;
> +static struct cyttsp_sysinfo_data_t g_sysinfo_data;

again globals?

> +static const struct i2c_device_id cyttsp_id[] = {
> + { CY_I2C_NAME, 0 }, { }

Why dont you put ,{} at the next line.

> +};

You should not put driver name above, but it should be something like real chip name.

Say cy8ctXXX.

> +static u8 bl_cmd[] = {
> + CY_BL_FILE0, CY_BL_CMD, CY_BL_EXIT,
> + CY_BL_KEY0, CY_BL_KEY1, CY_BL_KEY2,
> + CY_BL_KEY3, CY_BL_KEY4, CY_BL_KEY5,
> + CY_BL_KEY6, CY_BL_KEY7};

and what these keys does?

> +
> +MODULE_DEVICE_TABLE(i2c, cyttsp_id);

Why it is not with cyttsp_id above?

> +
> +static struct i2c_driver cyttsp_driver = {
> + .driver = {
> + .name = CY_I2C_NAME,
> + .owner = THIS_MODULE,
> + },
> + .probe = cyttsp_probe,
> + .remove = __devexit_p(cyttsp_remove),
> + .suspend = cyttsp_suspend,
> + .resume = cyttsp_resume,
> + .id_table = cyttsp_id,
> +};
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver");
> +MODULE_AUTHOR("Cypress");

MODULE_ALIAS?

> +
> +static ssize_t cyttsp_irq_status(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct cyttsp *ts = i2c_get_clientdata(client);
> + return sprintf(buf, "%u\n", atomic_read(&ts->irq_enabled));
> +}
> +
> +static ssize_t cyttsp_irq_enable(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct cyttsp *ts = i2c_get_clientdata(client);
> + int err = 0;
> + unsigned long value;
> +
> + if (size > 2)
> + return -EINVAL;
> +
> + err = strict_strtoul(buf, 10, &value);
> + if (err != 0)
> + return err;
> +
> + switch (value) {
> + case 0:
> + if (atomic_cmpxchg(&ts->irq_enabled, 1, 0)) {
> + pr_info("touch irq disabled!\n");
> + disable_irq_nosync(ts->client->irq);
> + }
> + err = size;
> + break;
> + case 1:
> + if (!atomic_cmpxchg(&ts->irq_enabled, 0, 1)) {
> + pr_info("touch irq enabled!\n");
> + enable_irq(ts->client->irq);
> + }
> + err = size;
> + break;
> + default:
> + pr_info("cyttsp_irq_enable failed -> irq_enabled = %d\n",
> + atomic_read(&ts->irq_enabled));
> + err = -EINVAL;
> + break;
> + }
> +
> + return err;
> +}
> +
> +static DEVICE_ATTR(irq_enable, 0777, cyttsp_irq_status, cyttsp_irq_enable);


Please explain why you are providing this sysfs entries?

> +
> +/* The cyttsp_xy_worker function reads the XY coordinates and sends them to
> + * the input layer. It is scheduled from the interrupt (or timer).
> + */
> +void cyttsp_xy_worker(struct work_struct *work)
> +{
> + struct cyttsp *ts = container_of(work, struct cyttsp, work);
> + u8 id, tilt, rev_x, rev_y;
> + u8 i, loc;
> + u8 prv_tch; /* number of previous touches */
> + u8 cur_tch; /* number of current touches */
> + u16 tmp_trk[CY_NUM_MT_TCH_ID];
> + u16 snd_trk[CY_NUM_MT_TCH_ID];
> + u16 cur_trk[CY_NUM_TRK_ID];
> + u16 cur_st_tch[CY_NUM_ST_TCH_ID];
> + u16 cur_mt_tch[CY_NUM_MT_TCH_ID];
> + /* if NOT CY_USE_TRACKING_ID then
> + * only uses CY_NUM_MT_TCH_ID positions */
> + u16 cur_mt_pos[CY_NUM_TRK_ID][2];
> + /* if NOT CY_USE_TRACKING_ID then
> + * only uses CY_NUM_MT_TCH_ID positions */
> + u8 cur_mt_z[CY_NUM_TRK_ID];
> + u8 curr_tool_width;
> + u16 st_x1, st_y1;
> + u8 st_z1;
> + u16 st_x2, st_y2;
> + u8 st_z2;
> + s32 retval;
> +
> + cyttsp_xdebug("TTSP worker start 1:\n");
> +
> + /* get event data from CYTTSP device */
> + i = CY_NUM_RETRY;
> + do {
> + retval = i2c_smbus_read_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(struct cyttsp_gen3_xydata_t), (u8 *)&g_xy_data);
> + } while ((retval < CY_OK) && --i);
> +
> + if (retval < CY_OK) {
> + /* return immediately on
> + * failure to read device on the i2c bus */
> + goto exit_xy_worker;
> + }
> +
> + cyttsp_xdebug("TTSP worker start 2:\n");
> +
> + /* compare own irq counter with the device irq counter */
> + if (ts->client->irq) {
> + u8 host_reg;
> + u8 cur_cnt;
> + if (ts->platform_data->use_hndshk) {
> +
> + host_reg = g_xy_data.hst_mode & CY_HNDSHK_BIT ?
> + g_xy_data.hst_mode & ~CY_HNDSHK_BIT :
> + g_xy_data.hst_mode | CY_HNDSHK_BIT;
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE, sizeof(host_reg), &host_reg);
> + }
> + cur_cnt = g_xy_data.tt_undef[CY_IRQ_CNT_REG];
> + irq_cnt_total++;
> + irq_cnt++;
> + if (irq_cnt != cur_cnt) {
> + irq_err_cnt++;
> + cyttsp_debug("i_c_ER: dv=%d fw=%d hm=%02X t=%lu te=%lu\n", \
> + irq_cnt, \
> + cur_cnt, g_xy_data.hst_mode, \
> + (unsigned long)irq_cnt_total, \
> + (unsigned long)irq_err_cnt);
> + } else {
> + cyttsp_debug("i_c_ok: dv=%d fw=%d hm=%02X t=%lu te=%lu\n", \
> + irq_cnt, \
> + cur_cnt, g_xy_data.hst_mode, \
> + (unsigned long)irq_cnt_total, \
> + (unsigned long)irq_err_cnt);
> + }
> + irq_cnt = cur_cnt;
> + }
> +
> + /* Get the current num touches and return if there are no touches */
> + if ((GET_BOOTLOADERMODE(g_xy_data.tt_mode) == 1) ||
> + (GET_HSTMODE(g_xy_data.hst_mode) != CY_OK)) {
> + u8 host_reg, tries;
> + /* the TTSP device has suffered spurious reset or mode switch */
> + cyttsp_debug( \
> + "Spurious err opmode (tt_mode=%02X hst_mode=%02X)\n", \
> + g_xy_data.tt_mode, g_xy_data.hst_mode);
> + cyttsp_debug("Reset TTSP Device; Terminating active tracks\n");
> + /* terminate all active tracks */
> + cur_tch = CY_NTCH;
> + /* reset TTSP part and take it back out of Bootloader mode */
> + host_reg = CY_SOFT_RESET_MODE;
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(host_reg), &host_reg);
> + tries = 0;
> + do {
> + mdelay(1000);
> +
> + /* set arg2 to non-0 to activate */
> + retval = cyttsp_putbl(ts, 1, false, false, false);
> + } while (!(retval < CY_OK) &&
> + !GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
> + !(g_bl_data.bl_file ==
> + CY_OP_MODE + CY_LOW_PWR_MODE) &&
> + tries++ < 10);
> + /* switch back to operational mode */
> + if (GET_BOOTLOADERMODE(g_bl_data.bl_status)) {
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(bl_cmd), bl_cmd);
> + tries = 0;
> + do {
> + mdelay(1000);
> + cyttsp_putbl(ts, 1, false, false, false);
> + } while (GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
> + tries++ < 10);
> + }
> + if (!(retval < CY_OK)) {
> + host_reg = CY_OP_MODE
> + /* + CY_LOW_PWR_MODE */;
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(host_reg), &host_reg);
> + /* wait for TTSP Device to complete switch to Op mode */
> + mdelay(1000);
> + }
> + goto exit_xy_worker;
> + } else {
> + cur_tch = GET_NUM_TOUCHES(g_xy_data.tt_stat);
> + if (IS_LARGE_AREA(g_xy_data.tt_stat)) {
> + /* terminate all active tracks */
> + cur_tch = CY_NTCH;
> + cyttsp_debug("Large obj detect (tt_stat=0x%02X). Terminate act trks\n", \
> + g_xy_data.tt_stat);
> + } else if (cur_tch > CY_NUM_MT_TCH_ID) {
> + /* if the number of fingers on the touch surface
> + * is more than the maximum then
> + * there will be no new track information
> + * even for the original touches.
> + * Therefore, terminate all active tracks.
> + */
> + cur_tch = CY_NTCH;
> + cyttsp_debug("Num touch err (tt_stat=0x%02X). Terminate act trks\n", \
> + g_xy_data.tt_stat);
> + }
> + }
> +
> + /* set tool size */
> + curr_tool_width = CY_SMALL_TOOL_WIDTH;
> +
> + /* translate Gen2 interface data into comparable Gen3 data */
> + if (ts->platform_data->gen == CY_GEN2) {
> + struct cyttsp_gen2_xydata_t *pxy_gen2_data;
> + pxy_gen2_data = (struct cyttsp_gen2_xydata_t *)(&g_xy_data);
> +
> + /* use test data? */
> + cyttsp_testdat(&g_xy_data, &tt_gen2_testray, \
> + sizeof(struct cyttsp_gen3_xydata_t));
> +
> + if (pxy_gen2_data->evnt_idx == CY_GEN2_NOTOUCH) {
> + cur_tch = 0;
> + } else if (cur_tch == CY_GEN2_GHOST) {
> + cur_tch = 0;
> + } else if (cur_tch == CY_GEN2_2TOUCH) {
> + /* stuff artificial track ID1 and ID2 */
> + g_xy_data.touch12_id = 0x12;
> + g_xy_data.z1 = CY_MAXZ;
> + g_xy_data.z2 = CY_MAXZ;
> + cur_tch--; /* 2 touches */
> + } else if (cur_tch == CY_GEN2_1TOUCH) {
> + /* stuff artificial track ID1 and ID2 */
> + g_xy_data.touch12_id = 0x12;
> + g_xy_data.z1 = CY_MAXZ;
> + g_xy_data.z2 = CY_NTCH;
> + if (pxy_gen2_data->evnt_idx == CY_GEN2_TOUCH2) {
> + /* push touch 2 data into touch1
> + * (first finger up; second finger down) */
> + /* stuff artificial track ID1 for touch2 info */
> + g_xy_data.touch12_id = 0x20;
> + /* stuff touch 1 with touch 2 coordinate data */
> + g_xy_data.x1 = g_xy_data.x2;
> + g_xy_data.y1 = g_xy_data.y2;
> + }
> + } else {
> + cur_tch = 0;
> + }
> + } else {
> + /* use test data? */
> + cyttsp_testdat(&g_xy_data, &tt_gen3_testray, \
> + sizeof(struct cyttsp_gen3_xydata_t));
> + }
> +
> +
> +
> + /* clear current active track ID array and count previous touches */
> + for (id = 0, prv_tch = CY_NTCH;
> + id < CY_NUM_TRK_ID; id++) {
> + cur_trk[id] = CY_NTCH;
> + prv_tch += ts->act_trk[id];
> + }
> +
> + /* send no events if no previous touches and no new touches */
> + if ((prv_tch == CY_NTCH) &&
> + ((cur_tch == CY_NTCH) ||
> + (cur_tch > CY_NUM_MT_TCH_ID))) {
> + goto exit_xy_worker;
> + }
> +
> + cyttsp_debug("prev=%d curr=%d\n", prv_tch, cur_tch);
> +
> + for (id = 0; id < CY_NUM_ST_TCH_ID; id++) {
> + /* clear current single touches array */
> + cur_st_tch[id] = CY_IGNR_TCH;
> + }
> +
> + /* clear single touch positions */
> + st_x1 = CY_NTCH;
> + st_y1 = CY_NTCH;
> + st_z1 = CY_NTCH;
> + st_x2 = CY_NTCH;
> + st_y2 = CY_NTCH;
> + st_z2 = CY_NTCH;
> +
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
> + /* clear current multi-touches array and
> + * multi-touch positions/z */
> + cur_mt_tch[id] = CY_IGNR_TCH;
> + }
> +
> + if (ts->platform_data->use_trk_id) {
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
> + cur_mt_pos[id][CY_XPOS] = 0;
> + cur_mt_pos[id][CY_YPOS] = 0;
> + cur_mt_z[id] = 0;
> + }
> + } else {
> + for (id = 0; id < CY_NUM_TRK_ID; id++) {
> + cur_mt_pos[id][CY_XPOS] = 0;
> + cur_mt_pos[id][CY_YPOS] = 0;
> + cur_mt_z[id] = 0;
> + }
> + }
> +
> + /* Determine if display is tilted */
> + if (FLIP_DATA(ts->platform_data->flags))
> + tilt = true;
> + else
> + tilt = false;
> +
> + /* Check for switch in origin */
> + if (REVERSE_X(ts->platform_data->flags))
> + rev_x = true;
> + else
> + rev_x = false;
> +
> + if (REVERSE_Y(ts->platform_data->flags))
> + rev_y = true;
> + else
> + rev_y = false;
> +
> + if (cur_tch) {
> + struct cyttsp_gen2_xydata_t *pxy_gen2_data;
> + struct cyttsp_gen3_xydata_t *pxy_gen3_data;
> + switch (ts->platform_data->gen) {
> + case CY_GEN2: {
> + pxy_gen2_data =
> + (struct cyttsp_gen2_xydata_t *)(&g_xy_data);
> + cyttsp_xdebug("TTSP Gen2 report:\n");
> + cyttsp_xdebug("%02X %02X %02X\n", \
> + pxy_gen2_data->hst_mode, \
> + pxy_gen2_data->tt_mode, \
> + pxy_gen2_data->tt_stat);
> + cyttsp_xdebug("%04X %04X %02X %02X\n", \
> + pxy_gen2_data->x1, \
> + pxy_gen2_data->y1, \
> + pxy_gen2_data->z1, \
> + pxy_gen2_data->evnt_idx);
> + cyttsp_xdebug("%04X %04X %02X\n", \
> + pxy_gen2_data->x2, \
> + pxy_gen2_data->y2, \
> + pxy_gen2_data->tt_undef1);
> + cyttsp_xdebug("%02X %02X %02X\n", \
> + pxy_gen2_data->gest_cnt, \
> + pxy_gen2_data->gest_id, \
> + pxy_gen2_data->gest_set);
> + break;
> + }
> + case CY_GEN3:
> + default: {
> + pxy_gen3_data =
> + (struct cyttsp_gen3_xydata_t *)(&g_xy_data);
> + cyttsp_xdebug("TTSP Gen3 report:\n");
> + cyttsp_xdebug("%02X %02X %02X\n", \
> + pxy_gen3_data->hst_mode,
> + pxy_gen3_data->tt_mode,
> + pxy_gen3_data->tt_stat);
> + cyttsp_xdebug("%04X %04X %02X %02X", \
> + pxy_gen3_data->x1,
> + pxy_gen3_data->y1,
> + pxy_gen3_data->z1, \
> + pxy_gen3_data->touch12_id);
> + cyttsp_xdebug("%04X %04X %02X\n", \
> + pxy_gen3_data->x2, \
> + pxy_gen3_data->y2, \
> + pxy_gen3_data->z2);
> + cyttsp_xdebug("%02X %02X %02X\n", \
> + pxy_gen3_data->gest_cnt, \
> + pxy_gen3_data->gest_id, \
> + pxy_gen3_data->gest_set);
> + cyttsp_xdebug("%04X %04X %02X %02X\n", \
> + pxy_gen3_data->x3, \
> + pxy_gen3_data->y3, \
> + pxy_gen3_data->z3, \
> + pxy_gen3_data->touch34_id);
> + cyttsp_xdebug("%04X %04X %02X\n", \
> + pxy_gen3_data->x4, \
> + pxy_gen3_data->y4, \
> + pxy_gen3_data->z4);
> + break;
> + }
> + }
> + }
> +
> + /* process the touches */
> + switch (cur_tch) {
> + case 4: {
> + g_xy_data.x4 = be16_to_cpu(g_xy_data.x4);
> + g_xy_data.y4 = be16_to_cpu(g_xy_data.y4);
> + if (tilt)
> + FLIP_XY(g_xy_data.x4, g_xy_data.y4);
> +
> + if (rev_x) {
> + g_xy_data.x4 =
> + INVERT_X(g_xy_data.x4, ts->platform_data->maxx);
> + }
> + if (rev_y) {
> + g_xy_data.y4 =
> + INVERT_X(g_xy_data.y4, ts->platform_data->maxy);
> + }
> + id = GET_TOUCH4_ID(g_xy_data.touch34_id);
> + if (ts->platform_data->use_trk_id) {
> + cur_mt_pos[CY_MT_TCH4_IDX][CY_XPOS] =
> + g_xy_data.x4;
> + cur_mt_pos[CY_MT_TCH4_IDX][CY_YPOS] =
> + g_xy_data.y4;
> + cur_mt_z[CY_MT_TCH4_IDX] = g_xy_data.z4;
> + } else {
> + cur_mt_pos[id][CY_XPOS] = g_xy_data.x4;
> + cur_mt_pos[id][CY_YPOS] = g_xy_data.y4;
> + cur_mt_z[id] = g_xy_data.z4;
> + }
> + cur_mt_tch[CY_MT_TCH4_IDX] = id;
> + cur_trk[id] = CY_TCH;
> + if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
> + CY_NUM_TRK_ID) {
> + if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
> + st_x1 = g_xy_data.x4;
> + st_y1 = g_xy_data.y4;
> + st_z1 = g_xy_data.z4;
> + cur_st_tch[CY_ST_FNGR1_IDX] = id;
> + } else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
> + st_x2 = g_xy_data.x4;
> + st_y2 = g_xy_data.y4;
> + st_z2 = g_xy_data.z4;
> + cur_st_tch[CY_ST_FNGR2_IDX] = id;
> + }
> + }
> + cyttsp_xdebug("4th XYZ:% 3d,% 3d,% 3d ID:% 2d\n\n", \
> + g_xy_data.x4, g_xy_data.y4, g_xy_data.z4, \
> + (g_xy_data.touch34_id & 0x0F));
> + /* do not break */
> + }
> + case 3: {
> + g_xy_data.x3 = be16_to_cpu(g_xy_data.x3);
> + g_xy_data.y3 = be16_to_cpu(g_xy_data.y3);
> + if (tilt)
> + FLIP_XY(g_xy_data.x3, g_xy_data.y3);
> +
> + if (rev_x) {
> + g_xy_data.x3 =
> + INVERT_X(g_xy_data.x3, ts->platform_data->maxx);
> + }
> + if (rev_y) {
> + g_xy_data.y3 =
> + INVERT_X(g_xy_data.y3, ts->platform_data->maxy);
> + }
> + id = GET_TOUCH3_ID(g_xy_data.touch34_id);
> + if (ts->platform_data->use_trk_id) {
> + cur_mt_pos[CY_MT_TCH3_IDX][CY_XPOS] =
> + g_xy_data.x3;
> + cur_mt_pos[CY_MT_TCH3_IDX][CY_YPOS] =
> + g_xy_data.y3;
> + cur_mt_z[CY_MT_TCH3_IDX] = g_xy_data.z3;
> + } else {
> + cur_mt_pos[id][CY_XPOS] = g_xy_data.x3;
> + cur_mt_pos[id][CY_YPOS] = g_xy_data.y3;
> + cur_mt_z[id] = g_xy_data.z3;
> + }
> + cur_mt_tch[CY_MT_TCH3_IDX] = id;
> + cur_trk[id] = CY_TCH;
> + if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
> + CY_NUM_TRK_ID) {
> + if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
> + st_x1 = g_xy_data.x3;
> + st_y1 = g_xy_data.y3;
> + st_z1 = g_xy_data.z3;
> + cur_st_tch[CY_ST_FNGR1_IDX] = id;
> + } else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
> + st_x2 = g_xy_data.x3;
> + st_y2 = g_xy_data.y3;
> + st_z2 = g_xy_data.z3;
> + cur_st_tch[CY_ST_FNGR2_IDX] = id;
> + }
> + }
> + cyttsp_xdebug("3rd XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
> + g_xy_data.x3, g_xy_data.y3, g_xy_data.z3, \
> + ((g_xy_data.touch34_id >> 4) & 0x0F));
> + /* do not break */
> + }
> + case 2: {
> + g_xy_data.x2 = be16_to_cpu(g_xy_data.x2);
> + g_xy_data.y2 = be16_to_cpu(g_xy_data.y2);
> + if (tilt)
> + FLIP_XY(g_xy_data.x2, g_xy_data.y2);
> +
> + if (rev_x) {
> + g_xy_data.x2 =
> + INVERT_X(g_xy_data.x2, ts->platform_data->maxx);
> + }
> + if (rev_y) {
> + g_xy_data.y2 =
> + INVERT_X(g_xy_data.y2, ts->platform_data->maxy);
> + }
> + id = GET_TOUCH2_ID(g_xy_data.touch12_id);
> + if (ts->platform_data->use_trk_id) {
> + cur_mt_pos[CY_MT_TCH2_IDX][CY_XPOS] =
> + g_xy_data.x2;
> + cur_mt_pos[CY_MT_TCH2_IDX][CY_YPOS] =
> + g_xy_data.y2;
> + cur_mt_z[CY_MT_TCH2_IDX] = g_xy_data.z2;
> + } else {
> + cur_mt_pos[id][CY_XPOS] = g_xy_data.x2;
> + cur_mt_pos[id][CY_YPOS] = g_xy_data.y2;
> + cur_mt_z[id] = g_xy_data.z2;
> + }
> + cur_mt_tch[CY_MT_TCH2_IDX] = id;
> + cur_trk[id] = CY_TCH;
> + if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
> + CY_NUM_TRK_ID) {
> + if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
> + st_x1 = g_xy_data.x2;
> + st_y1 = g_xy_data.y2;
> + st_z1 = g_xy_data.z2;
> + cur_st_tch[CY_ST_FNGR1_IDX] = id;
> + } else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
> + st_x2 = g_xy_data.x2;
> + st_y2 = g_xy_data.y2;
> + st_z2 = g_xy_data.z2;
> + cur_st_tch[CY_ST_FNGR2_IDX] = id;
> + }
> + }
> + cyttsp_xdebug("2nd XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
> + g_xy_data.x2, g_xy_data.y2, g_xy_data.z2, \
> + (g_xy_data.touch12_id & 0x0F));
> + /* do not break */
> + }
> + case 1: {
> + g_xy_data.x1 = be16_to_cpu(g_xy_data.x1);
> + g_xy_data.y1 = be16_to_cpu(g_xy_data.y1);
> + if (tilt)
> + FLIP_XY(g_xy_data.x1, g_xy_data.y1);
> +
> + if (rev_x) {
> + g_xy_data.x1 =
> + INVERT_X(g_xy_data.x1, ts->platform_data->maxx);
> + }
> + if (rev_y) {
> + g_xy_data.y1 =
> + INVERT_X(g_xy_data.y1, ts->platform_data->maxy);
> + }
> + id = GET_TOUCH1_ID(g_xy_data.touch12_id);
> + if (ts->platform_data->use_trk_id) {
> + cur_mt_pos[CY_MT_TCH1_IDX][CY_XPOS] =
> + g_xy_data.x1;
> + cur_mt_pos[CY_MT_TCH1_IDX][CY_YPOS] =
> + g_xy_data.y1;
> + cur_mt_z[CY_MT_TCH1_IDX] = g_xy_data.z1;
> + } else {
> + cur_mt_pos[id][CY_XPOS] = g_xy_data.x1;
> + cur_mt_pos[id][CY_YPOS] = g_xy_data.y1;
> + cur_mt_z[id] = g_xy_data.z1;
> + }
> + cur_mt_tch[CY_MT_TCH1_IDX] = id;
> + cur_trk[id] = CY_TCH;
> + if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
> + CY_NUM_TRK_ID) {
> + if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
> + st_x1 = g_xy_data.x1;
> + st_y1 = g_xy_data.y1;
> + st_z1 = g_xy_data.z1;
> + cur_st_tch[CY_ST_FNGR1_IDX] = id;
> + } else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
> + st_x2 = g_xy_data.x1;
> + st_y2 = g_xy_data.y1;
> + st_z2 = g_xy_data.z1;
> + cur_st_tch[CY_ST_FNGR2_IDX] = id;
> + }
> + }
> + cyttsp_xdebug("1st XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
> + g_xy_data.x1, g_xy_data.y1, g_xy_data.z1, \
> + ((g_xy_data.touch12_id >> 4) & 0x0F));
> + break;
> + }
> + case 0:
> + default:{
> + break;
> + }
> + }
> +
> + /* handle Single Touch signals */
> + if (ts->platform_data->use_st) {
> + cyttsp_xdebug("ST STEP 0 - ST1 ID=%d ST2 ID=%d\n", \
> + cur_st_tch[CY_ST_FNGR1_IDX], \
> + cur_st_tch[CY_ST_FNGR2_IDX]);
> + if (cur_st_tch[CY_ST_FNGR1_IDX] > CY_NUM_TRK_ID) {
> + /* reassign finger 1 and 2 positions to new tracks */
> + if (cur_tch > 0) {
> + /* reassign st finger1 */
> + if (ts->platform_data->use_trk_id) {
> + id = CY_MT_TCH1_IDX;
> + cur_st_tch[CY_ST_FNGR1_IDX] = cur_mt_tch[id];
> + } else {
> + id = GET_TOUCH1_ID(g_xy_data.touch12_id);
> + cur_st_tch[CY_ST_FNGR1_IDX] = id;
> + }
> + st_x1 = cur_mt_pos[id][CY_XPOS];
> + st_y1 = cur_mt_pos[id][CY_YPOS];
> + st_z1 = cur_mt_z[id];
> + cyttsp_xdebug("ST STEP 1 - ST1 ID=%3d\n", \
> + cur_st_tch[CY_ST_FNGR1_IDX]);
> + if ((cur_tch > 1) &&
> + (cur_st_tch[CY_ST_FNGR2_IDX] >
> + CY_NUM_TRK_ID)) {
> + /* reassign st finger2 */
> + if (cur_tch > 1) {
> + if (ts->platform_data->use_trk_id) {
> + id = CY_MT_TCH2_IDX;
> + cur_st_tch[CY_ST_FNGR2_IDX] = cur_mt_tch[id];
> + } else {
> + id = GET_TOUCH2_ID(g_xy_data.touch12_id);
> + cur_st_tch[CY_ST_FNGR2_IDX] = id;
> + }
> + st_x2 = cur_mt_pos[id][CY_XPOS];
> + st_y2 = cur_mt_pos[id][CY_YPOS];
> + st_z2 = cur_mt_z[id];
> + cyttsp_xdebug("ST STEP 2 - ST2 ID=%3d\n", \
> + cur_st_tch[CY_ST_FNGR2_IDX]);
> + }
> + }
> + }
> + } else if (cur_st_tch[CY_ST_FNGR2_IDX] > CY_NUM_TRK_ID) {
> + if (cur_tch > 1) {
> + /* reassign st finger2 */
> + if (ts->platform_data->use_trk_id) {
> + /* reassign st finger2 */
> + id = CY_MT_TCH2_IDX;
> + cur_st_tch[CY_ST_FNGR2_IDX] =
> + cur_mt_tch[id];
> + } else {
> + /* reassign st finger2 */
> + id = GET_TOUCH2_ID(g_xy_data.touch12_id);
> + cur_st_tch[CY_ST_FNGR2_IDX] = id;
> + }
> + st_x2 = cur_mt_pos[id][CY_XPOS];
> + st_y2 = cur_mt_pos[id][CY_YPOS];
> + st_z2 = cur_mt_z[id];
> + cyttsp_xdebug("ST STEP 3 - ST2 ID=%3d\n", \
> + cur_st_tch[CY_ST_FNGR2_IDX]);
> + }
> + }
> + /* if the 1st touch is missing and there is a 2nd touch,
> + * then set the 1st touch to 2nd touch and terminate 2nd touch
> + */
> + if ((cur_st_tch[CY_ST_FNGR1_IDX] > CY_NUM_TRK_ID) &&
> + (cur_st_tch[CY_ST_FNGR2_IDX] < CY_NUM_TRK_ID)) {
> + st_x1 = st_x2;
> + st_y1 = st_y2;
> + st_z1 = st_z2;
> + cur_st_tch[CY_ST_FNGR1_IDX] =
> + cur_st_tch[CY_ST_FNGR2_IDX];
> + cur_st_tch[CY_ST_FNGR2_IDX] =
> + CY_IGNR_TCH;
> + }
> + /* if the 2nd touch ends up equal to the 1st touch,
> + * then just report a single touch */
> + if (cur_st_tch[CY_ST_FNGR1_IDX] ==
> + cur_st_tch[CY_ST_FNGR2_IDX]) {
> + cur_st_tch[CY_ST_FNGR2_IDX] =
> + CY_IGNR_TCH;
> + }
> + /* set Single Touch current event signals */
> + if (cur_st_tch[CY_ST_FNGR1_IDX] < CY_NUM_TRK_ID) {
> + input_report_abs(ts->input,
> + ABS_X, st_x1);
> + input_report_abs(ts->input,
> + ABS_Y, st_y1);
> + input_report_abs(ts->input,
> + ABS_PRESSURE, st_z1);
> + input_report_key(ts->input,
> + BTN_TOUCH,
> + CY_TCH);
> + input_report_abs(ts->input,
> + ABS_TOOL_WIDTH,
> + curr_tool_width);
> + cyttsp_debug("ST->F1:%3d X:%3d Y:%3d Z:%3d\n", \
> + cur_st_tch[CY_ST_FNGR1_IDX], \
> + st_x1, st_y1, st_z1);
> + if (cur_st_tch[CY_ST_FNGR2_IDX] < CY_NUM_TRK_ID) {
> + input_report_key(ts->input, BTN_2, CY_TCH);
> + input_report_abs(ts->input, ABS_HAT0X, st_x2);
> + input_report_abs(ts->input, ABS_HAT0Y, st_y2);
> + cyttsp_debug("ST->F2:%3d X:%3d Y:%3d Z:%3d\n", \
> + cur_st_tch[CY_ST_FNGR2_IDX],
> + st_x2, st_y2, st_z2);
> + } else {
> + input_report_key(ts->input,
> + BTN_2,
> + CY_NTCH);
> + }
> + } else {
> + input_report_abs(ts->input, ABS_PRESSURE, CY_NTCH);
> + input_report_key(ts->input, BTN_TOUCH, CY_NTCH);
> + input_report_key(ts->input, BTN_2, CY_NTCH);
> + }
> + /* update platform data for the current single touch info */
> + ts->prv_st_tch[CY_ST_FNGR1_IDX] = cur_st_tch[CY_ST_FNGR1_IDX];
> + ts->prv_st_tch[CY_ST_FNGR2_IDX] = cur_st_tch[CY_ST_FNGR2_IDX];
> +
> + }
> +
> + /* handle Multi-touch signals */
> + if (ts->platform_data->use_mt) {
> + if (ts->platform_data->use_trk_id) {
> + /* terminate any previous touch where the track
> + * is missing from the current event */
> + for (id = 0; id < CY_NUM_TRK_ID; id++) {
> + if ((ts->act_trk[id] != CY_NTCH) &&
> + (cur_trk[id] == CY_NTCH)) {
> + input_report_abs(ts->input,
> + ABS_MT_TRACKING_ID,
> + id);
> + input_report_abs(ts->input,
> + ABS_MT_TOUCH_MAJOR,
> + CY_NTCH);
> + input_report_abs(ts->input,
> + ABS_MT_WIDTH_MAJOR,
> + curr_tool_width);
> + input_report_abs(ts->input,
> + ABS_MT_POSITION_X,
> + ts->prv_mt_pos[id][CY_XPOS]);
> + input_report_abs(ts->input,
> + ABS_MT_POSITION_Y,
> + ts->prv_mt_pos[id][CY_YPOS]);
> + CY_MT_SYNC(ts->input);
> + ts->act_trk[id] = CY_NTCH;
> + ts->prv_mt_pos[id][CY_XPOS] = 0;
> + ts->prv_mt_pos[id][CY_YPOS] = 0;
> + }
> + }
> + /* set Multi-Touch current event signals */
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
> + if (cur_mt_tch[id] < CY_NUM_TRK_ID) {
> + input_report_abs(ts->input,
> + ABS_MT_TRACKING_ID,
> + cur_mt_tch[id]);
> + input_report_abs(ts->input,
> + ABS_MT_TOUCH_MAJOR,
> + cur_mt_z[id]);
> + input_report_abs(ts->input,
> + ABS_MT_WIDTH_MAJOR,
> + curr_tool_width);
> + input_report_abs(ts->input,
> + ABS_MT_POSITION_X,
> + cur_mt_pos[id][CY_XPOS]);
> + input_report_abs(ts->input,
> + ABS_MT_POSITION_Y,
> + cur_mt_pos[id][CY_YPOS]);
> + CY_MT_SYNC(ts->input);
> + ts->act_trk[id] = CY_TCH;
> + ts->prv_mt_pos[id][CY_XPOS] =
> + cur_mt_pos[id][CY_XPOS];
> + ts->prv_mt_pos[id][CY_YPOS] =
> + cur_mt_pos[id][CY_YPOS];
> + }
> + }
> + } else {
> + /* set temporary track array elements to voids */
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
> + tmp_trk[id] = CY_IGNR_TCH;
> + snd_trk[id] = CY_IGNR_TCH;
> + }
> +
> + /* get what is currently active */
> + for (i = 0, id = 0;
> + id < CY_NUM_TRK_ID && i < CY_NUM_MT_TCH_ID;
> + id++) {
> + if (cur_trk[id] == CY_TCH) {
> + /* only incr counter if track found */
> + tmp_trk[i] = id;
> + i++;
> + }
> + }
> + cyttsp_xdebug("T1: t0=%d, t1=%d, t2=%d, t3=%d\n", \
> + tmp_trk[0], tmp_trk[1], tmp_trk[2], \
> + tmp_trk[3]);
> + cyttsp_xdebug("T1: p0=%d, p1=%d, p2=%d, p3=%d\n", \
> + ts->prv_mt_tch[0], ts->prv_mt_tch[1], \
> + ts->prv_mt_tch[2], ts->prv_mt_tch[3]);
> +
> + /* pack in still active previous touches */
> + for (id = 0, prv_tch = 0;
> + id < CY_NUM_MT_TCH_ID; id++) {
> + if (tmp_trk[id] < CY_NUM_TRK_ID) {
> + if (cyttsp_inlist(ts->prv_mt_tch,
> + tmp_trk[id], &loc,
> + CY_NUM_MT_TCH_ID)) {
> + loc &= CY_NUM_MT_TCH_ID - 1;
> + snd_trk[loc] = tmp_trk[id];
> + prv_tch++;
> + cyttsp_xdebug("inlist s[%d]=%d t[%d]=%d l=%d p=%d\n", \
> + loc, snd_trk[loc], \
> + id, tmp_trk[id], \
> + loc, prv_tch);
> + } else {
> + cyttsp_xdebug("not inlist s[%d]=%d t[%d]=%d l=%d \n", \
> + id, snd_trk[id], \
> + id, tmp_trk[id], \
> + loc);
> + }
> + }
> + }
> + cyttsp_xdebug("S1: s0=%d, s1=%d, s2=%d, s3=%d p=%d\n", \
> + snd_trk[0], snd_trk[1], snd_trk[2], \
> + snd_trk[3], prv_tch);
> +
> + /* pack in new touches */
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
> + if (tmp_trk[id] < CY_NUM_TRK_ID) {
> + if (!cyttsp_inlist(snd_trk, tmp_trk[id], &loc, CY_NUM_MT_TCH_ID)) {
> + cyttsp_xdebug("not inlist t[%d]=%d l=%d\n", \
> + id, tmp_trk[id], loc);
> + if (cyttsp_next_avail_inlist(snd_trk, &loc, CY_NUM_MT_TCH_ID)) {
> + loc &= CY_NUM_MT_TCH_ID - 1;
> + snd_trk[loc] = tmp_trk[id];
> + cyttsp_xdebug("put inlist s[%d]=%d t[%d]=%d\n",
> + loc, snd_trk[loc], id, tmp_trk[id]);
> + }
> + } else {
> + cyttsp_xdebug("is in list s[%d]=%d t[%d]=%d loc=%d\n", \
> + id, snd_trk[id], id, tmp_trk[id], loc);
> + }
> + }
> + }
> + cyttsp_xdebug("S2: s0=%d, s1=%d, s2=%d, s3=%d\n", \
> + snd_trk[0], snd_trk[1],
> + snd_trk[2], snd_trk[3]);
> +
> + /* sync motion event signals for each current touch */
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
> + /* z will either be 0 (NOTOUCH) or
> + * some pressure (TOUCH) */
> + cyttsp_xdebug("MT0 prev[%d]=%d temp[%d]=%d send[%d]=%d\n", \
> + id, ts->prv_mt_tch[id], \
> + id, tmp_trk[id], \
> + id, snd_trk[id]);
> + if (snd_trk[id] < CY_NUM_TRK_ID) {
> + input_report_abs(ts->input,
> + ABS_MT_TOUCH_MAJOR,
> + cur_mt_z[snd_trk[id]]);
> + input_report_abs(ts->input,
> + ABS_MT_WIDTH_MAJOR,
> + curr_tool_width);
> + input_report_abs(ts->input,
> + ABS_MT_POSITION_X,
> + cur_mt_pos[snd_trk[id]][CY_XPOS]);
> + input_report_abs(ts->input,
> + ABS_MT_POSITION_Y,
> + cur_mt_pos[snd_trk[id]][CY_YPOS]);
> + CY_MT_SYNC(ts->input);
> + cyttsp_debug("MT1->TID:%2d X:%3d Y:%3d Z:%3d touch-sent\n", \
> + snd_trk[id], \
> + cur_mt_pos[snd_trk[id]][CY_XPOS], \
> + cur_mt_pos[snd_trk[id]][CY_YPOS], \
> + cur_mt_z[snd_trk[id]]);
> + } else if (ts->prv_mt_tch[id] < CY_NUM_TRK_ID) {
> + /* void out this touch */
> + input_report_abs(ts->input,
> + ABS_MT_TOUCH_MAJOR,
> + CY_NTCH);
> + input_report_abs(ts->input,
> + ABS_MT_WIDTH_MAJOR,
> + curr_tool_width);
> + input_report_abs(ts->input,
> + ABS_MT_POSITION_X,
> + ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_XPOS]);
> + input_report_abs(ts->input,
> + ABS_MT_POSITION_Y,
> + ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_YPOS]);
> + CY_MT_SYNC(ts->input);
> + cyttsp_debug("MT2->TID:%2d X:%3d Y:%3d Z:%3d lift off-sent\n", \
> + ts->prv_mt_tch[id], \
> + ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_XPOS], \
> + ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_YPOS], \
> + CY_NTCH);
> + } else {
> + /* do not stuff any signals for this
> + * previously and currently
> + * void touches */
> + cyttsp_xdebug("MT3->send[%d]=%d - No touch - NOT sent\n", \
> + id, snd_trk[id]);
> + }
> + }
> +
> + /* save current posted tracks to
> + * previous track memory */
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
> + ts->prv_mt_tch[id] = snd_trk[id];
> + ts->prv_mt_pos[snd_trk[id]][CY_XPOS] =
> + cur_mt_pos[snd_trk[id]][CY_XPOS];
> + ts->prv_mt_pos[snd_trk[id]][CY_YPOS] =
> + cur_mt_pos[snd_trk[id]][CY_YPOS];
> + cyttsp_xdebug("MT4->TID:%2d X:%3d Y:%3d Z:%3d save for previous\n", \
> + snd_trk[id], \
> + ts->prv_mt_pos[snd_trk[id]][CY_XPOS], \
> + ts->prv_mt_pos[snd_trk[id]][CY_YPOS], \
> + CY_NTCH);
> + }
> + for (id = 0; id < CY_NUM_TRK_ID; id++)
> + ts->act_trk[id] = CY_NTCH;
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
> + if (snd_trk[id] < CY_NUM_TRK_ID)
> + ts->act_trk[snd_trk[id]] = CY_TCH;
> + }
> + }
> + }
> +
> + /* handle gestures */
> + if (ts->platform_data->use_gestures) {
> + if (g_xy_data.gest_id) {
> + input_report_key(ts->input,
> + BTN_3, CY_TCH);
> + input_report_abs(ts->input,
> + ABS_HAT1X, g_xy_data.gest_id);
> + input_report_abs(ts->input,
> + ABS_HAT2Y, g_xy_data.gest_cnt);
> + }
> + }
> +
> + /* signal the view motion event */
> + input_sync(ts->input);
> +
> + for (id = 0; id < CY_NUM_TRK_ID; id++) {
> + /* update platform data for the current MT information */
> + ts->act_trk[id] = cur_trk[id];
> + }
> +
> +exit_xy_worker:
> + if (cyttsp_disable_touch) {
> + /* Turn off the touch interrupts */
> + cyttsp_debug("Not enabling touch\n");
> + } else {
> + if (ts->client->irq == 0) {
> + /* restart event timer */
> + mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
> + } else {
> + /* re-enable the interrupt after processing */
> + enable_irq(ts->client->irq);
> + }
> + }
> + return;
> +}
> +
> +static int cyttsp_inlist(u16 prev_track[], u8 cur_trk_id,
> + u8 *prev_loc, u8 num_touches)
> +{

return could be "bool" instead of "int" right?

> + u8 id = 0;
> +
> + *prev_loc = CY_IGNR_TCH;
> +
> + cyttsp_xdebug("IN p[%d]=%d c=%d n=%d loc=%d\n", \
> + id, prev_track[id], cur_trk_id, \
> + num_touches, *prev_loc);

Indentation problem.

> + for (id = 0, *prev_loc = CY_IGNR_TCH;
> + (id < num_touches); id++) {
> + cyttsp_xdebug("p[%d]=%d c=%d n=%d loc=%d\n", \
> + id, prev_track[id], cur_trk_id, \
> + num_touches, *prev_loc);
> + if (prev_track[id] == cur_trk_id) {
> + *prev_loc = id;
> + break;
> + }
> + }
> + cyttsp_xdebug("OUT p[%d]=%d c=%d n=%d loc=%d\n", \
> + id, prev_track[id], cur_trk_id, num_touches, *prev_loc);
> +
> + return ((*prev_loc < CY_NUM_TRK_ID) ? true : false);
> +}
> +
> +static int cyttsp_next_avail_inlist(u16 cur_trk[],
> + u8 *new_loc, u8 num_touches)
> +{

return could be "bool" instead of "int" right?

> + u8 id;
> +
> + for (id = 0, *new_loc = CY_IGNR_TCH;
> + (id < num_touches); id++) {
> + if (cur_trk[id] > CY_NUM_TRK_ID) {
> + *new_loc = id;
> + break;
> + }
> + }
> +
> + return ((*new_loc < CY_NUM_TRK_ID) ? true : false);
> +}
> +
> +/* Timer function used as dummy interrupt driver */
> +static void cyttsp_timer(unsigned long handle)
> +{
> + struct cyttsp *ts = (struct cyttsp *) handle;
> +
> + cyttsp_xdebug("TTSP Device timer event\n");
> +
> + /* schedule motion signal handling */
> + queue_work(cyttsp_ts_wq, &ts->work);
> +
> + return;
> +}
> +
> +
> +
> +/* ************************************************************************
> + * ISR function. This function is general, initialized in drivers init
> + * function
> + * ************************************************************************ */
> +static irqreturn_t cyttsp_irq(int irq, void *handle)
> +{
> + struct cyttsp *ts = (struct cyttsp *) handle;
> +
> + cyttsp_xdebug("%s: Got IRQ\n", CY_I2C_NAME);
> +
> + /* disable further interrupts until this interrupt is processed */
> + disable_irq_nosync(ts->client->irq);

As indicated below please use request_threaded_irq(..).


> +
> + /* schedule motion signal handling */
> + queue_work(cyttsp_ts_wq, &ts->work);
> + return IRQ_HANDLED;
> +}
> +
> +/* ************************************************************************
> + * Probe initialization functions
> + * ************************************************************************ */
> +static int cyttsp_putbl(struct cyttsp *ts, int show,
> + int show_status, int show_version, int show_cid)
> +{
> + int retval = CY_OK;
> +
> + int num_bytes = (show_status * 3) + (show_version * 6) + (show_cid * 3);
> +
> + if (show_cid)
> + num_bytes = sizeof(struct cyttsp_bootloader_data_t);
> + else if (show_version)
> + num_bytes = sizeof(struct cyttsp_bootloader_data_t) - 3;
> + else
> + num_bytes = sizeof(struct cyttsp_bootloader_data_t) - 9;
> +
> + if (show) {
> + retval = i2c_smbus_read_i2c_block_data(ts->client,
> + CY_REG_BASE, num_bytes, (u8 *)&g_bl_data);
> + if (show_status) {
> + cyttsp_debug("BL%d: f=%02X s=%02X err=%02X bl=%02X%02X bld=%02X%02X\n", \
> + show, \
> + g_bl_data.bl_file, \
> + g_bl_data.bl_status, \
> + g_bl_data.bl_error, \
> + g_bl_data.blver_hi, g_bl_data.blver_lo, \
> + g_bl_data.bld_blver_hi, g_bl_data.bld_blver_lo);
> + }
> + if (show_version) {
> + cyttsp_debug("BL%d: ttspver=0x%02X%02X appid=0x%02X%02X appver=0x%02X%02X\n", \
> + show, \
> + g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
> + g_bl_data.appid_hi, g_bl_data.appid_lo, \
> + g_bl_data.appver_hi, g_bl_data.appver_lo);
> + }
> + if (show_cid) {
> + cyttsp_debug("BL%d: cid=0x%02X%02X%02X\n", \
> + show, \
> + g_bl_data.cid_0, \
> + g_bl_data.cid_1, \
> + g_bl_data.cid_2);
> + }
> + mdelay(CY_DLY_DFLT);
> + }
> +
> + return retval;
> +}
> +
> +#ifdef CY_INCLUDE_LOAD_FILE

Could you please explain what is the use of this #define?

Are we loading any firmware? Please explain why we can't use request_firware(...).

> +#define CY_MAX_I2C_LEN 256
> +#define CY_MAX_TRY 10
> +#define CY_BL_PAGE_SIZE 16
> +#define CY_BL_NUM_PAGES 5
> +static int cyttsp_i2c_wr_blk_data(struct i2c_client *client, u8 command,
> + u8 length, const u8 *values)
> +{
> + int retval = CY_OK;
> +
> + u8 dataray[CY_MAX_I2C_LEN];
> + u8 try;
> + dataray[0] = command;
> + if (length)
> + memcpy(&dataray[1], values, length);
> +
> + try = CY_MAX_TRY;
> + do {
> + retval = i2c_master_send(client, dataray, length+1);
> + mdelay(CY_DLY_DFLT*2);
> + } while ((retval != length+1) && try--);
> +
> + return retval;
> +}
> +
> +static int cyttsp_i2c_wr_blk_chunks(struct cyttsp *ts, u8 command,
> + u8 length, const u8 *values)
> +{
> + int retval = CY_OK;
> + int block = 1;
> +
> + u8 dataray[CY_MAX_I2C_LEN];
> +
> + /* first page already includes the bl page offset */
> + retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
> + CY_BL_PAGE_SIZE+1, values);
> + mdelay(10);
> + values += CY_BL_PAGE_SIZE+1;
> + length -= CY_BL_PAGE_SIZE+1;
> +
> + /* rem blocks require bl page offset stuffing */
> + while (length &&
> + (block < CY_BL_NUM_PAGES) &&
> + !(retval < CY_OK)) {
> + dataray[0] = CY_BL_PAGE_SIZE*block;
> + memcpy(&dataray[1], values,
> + length >= CY_BL_PAGE_SIZE ?
> + CY_BL_PAGE_SIZE : length);
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + length >= CY_BL_PAGE_SIZE ?
> + CY_BL_PAGE_SIZE + 1 : length+1, dataray);
> + mdelay(10);
> + values += CY_BL_PAGE_SIZE;
> + length = length >= CY_BL_PAGE_SIZE ?
> + length - CY_BL_PAGE_SIZE : 0;
> + block++;
> + }
> +
> + return retval;
> +}
> +
> +static int cyttsp_bootload_app(struct cyttsp *ts)
> +{
> + int retval = CY_OK;
> + int i, tries;
> + u8 host_reg;
> +
> + cyttsp_debug("load new firmware \n");
> + /* reset TTSP Device back to bootloader mode */
> + host_reg = CY_SOFT_RESET_MODE;
> + retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
> + sizeof(host_reg), &host_reg);
> + /* wait for TTSP Device to complete reset back to bootloader */
> + mdelay(1000);
> + cyttsp_putbl(ts, 3, true, true, true);
> + cyttsp_debug("load file - tver=0x%02X%02X a_id=0x%02X%02X aver=0x%02X%02X\n", \
> + cyttsp_fw_tts_verh, cyttsp_fw_tts_verl, \
> + cyttsp_fw_app_idh, cyttsp_fw_app_idl, \
> + cyttsp_fw_app_verh, cyttsp_fw_app_verl);
> +
> + /* download new TTSP Application to the Bootloader */
> + if (!(retval < CY_OK)) {
> + i = 0;
> + /* send bootload initiation command */
> + if (cyttsp_fw[i].Command == CY_BL_INIT_LOAD) {
> + g_bl_data.bl_file = 0;
> + g_bl_data.bl_status = 0;
> + g_bl_data.bl_error = 0;
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + cyttsp_fw[i].Length, cyttsp_fw[i].Block);
> + /* delay to allow bl to get ready for block writes */
> + i++;
> + tries = 0;
> + cyttsp_debug("wait init f=%02X, s=%02X, e=%02X t=%d\n", \
> + g_bl_data.bl_file, g_bl_data.bl_status, \
> + g_bl_data.bl_error, tries);
> + do {
> + mdelay(1000);
> + cyttsp_putbl(ts, 4, true, false, false);
> + } while (g_bl_data.bl_status != 0x10 &&
> + g_bl_data.bl_status != 0x11 &&
> + tries++ < 10);
> + /* send bootload firmware load blocks */
> + if (!(retval < CY_OK)) {
> + while (cyttsp_fw[i].Command == CY_BL_WRITE_BLK) {
> + retval = cyttsp_i2c_wr_blk_chunks(ts,
> + CY_REG_BASE,
> + cyttsp_fw[i].Length,
> + cyttsp_fw[i].Block);
> + /* bl requires dly after blocks */
> + mdelay(100);
> + cyttsp_debug("BL DNLD Rec=% 3d Len=% 3d Addr=%04X\n", \
> + cyttsp_fw[i].Record, \
> + cyttsp_fw[i].Length, \
> + cyttsp_fw[i].Address);
> + i++;
> + if (retval < CY_OK) {
> + cyttsp_debug("BL fail Rec=%3d retval=%d\n", \
> + cyttsp_fw[i-1].Record, \
> + retval);
> + break;
> + } else {
> + /* reset TTSP I2C counter */
> + retval = cyttsp_i2c_wr_blk_data(ts->client,
> + CY_REG_BASE,
> + 0, NULL);
> + mdelay(10);
> + cyttsp_putbl(ts, 5,
> + true, false, false);
> + }
> + }
> + if (!(retval < CY_OK)) {
> + while (i < cyttsp_fw_records) {
> + retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
> + cyttsp_fw[i].Length,
> + cyttsp_fw[i].Block);
> + i++;
> + tries = 0;
> + cyttsp_debug("wait init f=%02X, s=%02X, e=%02X t=%d\n", \
> + g_bl_data.bl_file, \
> + g_bl_data.bl_status, \
> + g_bl_data.bl_error, \
> + tries);
> + do {
> + mdelay(1000);
> + cyttsp_putbl(ts, 6, true, false, false);
> + } while (g_bl_data.bl_status != 0x10 &&
> + g_bl_data.bl_status != 0x11 &&
> + tries++ < 10);
> + cyttsp_putbl(ts, 7, true, false,
> + false);
> + if (retval < CY_OK)
> + break;
> + }
> + }
> + }
> + }
> + }
> +
> + /* reset TTSP Device back to bootloader mode */
> + host_reg = CY_SOFT_RESET_MODE;
> + retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
> + sizeof(host_reg), &host_reg);
> + /* wait for TTSP Device to complete reset back to bootloader */
> + mdelay(1000);
> +
> + /* set arg2 to non-0 to activate */
> + retval = cyttsp_putbl(ts, 8, true, true, true);
> +
> + return retval;
> +}
> +#else
> +static int cyttsp_bootload_app(struct cyttsp *ts)
> +{
> + cyttsp_debug("no-load new firmware \n");
> + return CY_OK;
> +}
> +#endif /* CY_INCLUDE_LOAD_FILE */
> +
> +
> +static int cyttsp_power_on(struct cyttsp *ts)
> +{
> + int retval = CY_OK;
> + u8 host_reg;
> + int tries;
> +
> + cyttsp_debug("Power up \n");
> +
> + /* check if the TTSP device has a bootloader installed */
> + host_reg = CY_SOFT_RESET_MODE;
> + retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
> + sizeof(host_reg), &host_reg);
> + tries = 0;
> + do {
> + mdelay(1000);
> +
> + /* set arg2 to non-0 to activate */
> + retval = cyttsp_putbl(ts, 1, true, true, true);
> + cyttsp_info("BL%d: f=%02X s=%02X err=%02X bl=%02X%02X bld=%02X%02X R=%d\n", \
> + 101, \
> + g_bl_data.bl_file, g_bl_data.bl_status, \
> + g_bl_data.bl_error, \
> + g_bl_data.blver_hi, g_bl_data.blver_lo, \
> + g_bl_data.bld_blver_hi, g_bl_data.bld_blver_lo,
> + retval);
> + cyttsp_info("BL%d: tver=%02X%02X a_id=%02X%02X aver=%02X%02X\n", \
> + 102, \
> + g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
> + g_bl_data.appid_hi, g_bl_data.appid_lo, \
> + g_bl_data.appver_hi, g_bl_data.appver_lo);
> + cyttsp_info("BL%d: c_id=%02X%02X%02X\n", \
> + 103, \
> + g_bl_data.cid_0, g_bl_data.cid_1, g_bl_data.cid_2);
> + } while (!(retval < CY_OK) &&
> + !GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
> + !(g_bl_data.bl_file == CY_OP_MODE + CY_LOW_PWR_MODE) &&
> + tries++ < 10);
> +
> + /* is bootloader missing? */
> + if (!(retval < CY_OK)) {
> + cyttsp_xdebug("Ret=%d Check if bootloader is missing...\n", \
> + retval);
> + if (!GET_BOOTLOADERMODE(g_bl_data.bl_status)) {
> + /* skip all bl and sys info and go to op mode */
> + if (!(retval < CY_OK)) {
> + cyttsp_xdebug("Bl is missing (ret=%d)\n", \
> + retval);
> + host_reg = CY_OP_MODE/* + CY_LOW_PWR_MODE*/;
> + retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
> + sizeof(host_reg), &host_reg);
> + /* wait for TTSP Device to complete switch to
> + * Operational mode */
> + mdelay(1000);
> + goto bypass;
> + }
> + }
> + }
> +
> +
> + /* take TTSP out of bootloader mode; go to TrueTouch operational mode */
> + if (!(retval < CY_OK)) {
> + cyttsp_xdebug1("exit bootloader; go operational\n");
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE, sizeof(bl_cmd), bl_cmd);
> + tries = 0;
> + do {
> + mdelay(1000);
> + cyttsp_putbl(ts, 4, true, false, false);
> + cyttsp_info("BL%d: f=%02X s=%02X err=%02X bl=%02X%02X bld=%02X%02X\n", \
> + 104, \
> + g_bl_data.bl_file, g_bl_data.bl_status, \
> + g_bl_data.bl_error, \
> + g_bl_data.blver_hi, g_bl_data.blver_lo, \
> + g_bl_data.bld_blver_hi, g_bl_data.bld_blver_lo);
> + } while (GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
> + tries++ < 10);
> + }
> +
> +
> +
> + if (!(retval < CY_OK) &&
> + cyttsp_app_load()) {
> + mdelay(1000);
> + if (CY_DIFF(g_bl_data.ttspver_hi, cyttsp_tts_verh()) ||
> + CY_DIFF(g_bl_data.ttspver_lo, cyttsp_tts_verl()) ||
> + CY_DIFF(g_bl_data.appid_hi, cyttsp_app_idh()) ||
> + CY_DIFF(g_bl_data.appid_lo, cyttsp_app_idl()) ||
> + CY_DIFF(g_bl_data.appver_hi, cyttsp_app_verh()) ||
> + CY_DIFF(g_bl_data.appver_lo, cyttsp_app_verl()) ||
> + CY_DIFF(g_bl_data.cid_0, cyttsp_cid_0()) ||
> + CY_DIFF(g_bl_data.cid_1, cyttsp_cid_1()) ||
> + CY_DIFF(g_bl_data.cid_2, cyttsp_cid_2()) ||
> + cyttsp_force_fw_load()) {
> + cyttsp_debug("blttsp=0x%02X%02X flttsp=0x%02X%02X force=%d\n", \
> + g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
> + cyttsp_tts_verh(), cyttsp_tts_verl(), \
> + cyttsp_force_fw_load());
> + cyttsp_debug("blappid=0x%02X%02X flappid=0x%02X%02X\n", \
> + g_bl_data.appid_hi, g_bl_data.appid_lo, \
> + cyttsp_app_idh(), cyttsp_app_idl());
> + cyttsp_debug("blappver=0x%02X%02X flappver=0x%02X%02X\n", \
> + g_bl_data.appver_hi, g_bl_data.appver_lo, \
> + cyttsp_app_verh(), cyttsp_app_verl());
> + cyttsp_debug("blcid=0x%02X%02X%02X flcid=0x%02X%02X%02X\n", \
> + g_bl_data.cid_0, \
> + g_bl_data.cid_1, \
> + g_bl_data.cid_2, \
> + cyttsp_cid_0(), \
> + cyttsp_cid_1(), \
> + cyttsp_cid_2());
> + /* enter bootloader to load new app into TTSP Device */
> + retval = cyttsp_bootload_app(ts);
> + /* take TTSP device out of bootloader mode;
> + * switch back to TrueTouch operational mode */
> + if (!(retval < CY_OK)) {
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(bl_cmd), bl_cmd);
> + /* wait for TTSP Device to complete
> + * switch to Operational mode */
> + mdelay(1000);
> + }
> + }
> + }
> +
> +bypass:
> + /* switch to System Information mode to read versions
> + * and set interval registers */
> + if (!(retval < CY_OK)) {
> + cyttsp_debug("switch to sysinfo mode \n");
> + host_reg = CY_SYSINFO_MODE;
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE, sizeof(host_reg), &host_reg);
> + /* wait for TTSP Device to complete switch to SysInfo mode */
> + mdelay(1000);
> + if (!(retval < CY_OK)) {
> + retval = i2c_smbus_read_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(struct cyttsp_sysinfo_data_t),
> + (u8 *)&g_sysinfo_data);
> + cyttsp_debug("SI2: hst_mode=0x%02X mfg_cmd=0x%02X mfg_stat=0x%02X\n", \
> + g_sysinfo_data.hst_mode, \
> + g_sysinfo_data.mfg_cmd, \
> + g_sysinfo_data.mfg_stat);
> + cyttsp_debug("SI2: bl_ver=0x%02X%02X\n", \
> + g_sysinfo_data.bl_verh, \
> + g_sysinfo_data.bl_verl);
> + cyttsp_debug("SI2: sysinfo act_int=0x%02X tch_tmout=0x%02X lp_int=0x%02X\n", \
> + g_sysinfo_data.act_intrvl, \
> + g_sysinfo_data.tch_tmout, \
> + g_sysinfo_data.lp_intrvl);
> + cyttsp_info("SI%d: tver=%02X%02X a_id=%02X%02X aver=%02X%02X\n", \
> + 102, \
> + g_sysinfo_data.tts_verh, \
> + g_sysinfo_data.tts_verl, \
> + g_sysinfo_data.app_idh, \
> + g_sysinfo_data.app_idl, \
> + g_sysinfo_data.app_verh, \
> + g_sysinfo_data.app_verl);
> + cyttsp_info("SI%d: c_id=%02X%02X%02X\n", \
> + 103, \
> + g_sysinfo_data.cid[0], \
> + g_sysinfo_data.cid[1], \
> + g_sysinfo_data.cid[2]);
> + if (!(retval < CY_OK) &&
> + (CY_DIFF(ts->platform_data->act_intrvl,
> + CY_ACT_INTRVL_DFLT) ||
> + CY_DIFF(ts->platform_data->tch_tmout,
> + CY_TCH_TMOUT_DFLT) ||
> + CY_DIFF(ts->platform_data->lp_intrvl,
> + CY_LP_INTRVL_DFLT))) {
> + if (!(retval < CY_OK)) {
> + u8 intrvl_ray[sizeof(ts->platform_data->act_intrvl) +
> + sizeof(ts->platform_data->tch_tmout) +
> + sizeof(ts->platform_data->lp_intrvl)];
> + u8 i = 0;
> +
> + intrvl_ray[i++] =
> + ts->platform_data->act_intrvl;
> + intrvl_ray[i++] =
> + ts->platform_data->tch_tmout;
> + intrvl_ray[i++] =
> + ts->platform_data->lp_intrvl;
> +
> + cyttsp_debug("SI2: platinfo act_intrvl=0x%02X tch_tmout=0x%02X lp_intrvl=0x%02X\n", \
> + ts->platform_data->act_intrvl, \
> + ts->platform_data->tch_tmout, \
> + ts->platform_data->lp_intrvl);
> + /* set intrvl registers */
> + retval = i2c_smbus_write_i2c_block_data(
> + ts->client,
> + CY_REG_ACT_INTRVL,
> + sizeof(intrvl_ray), intrvl_ray);
> + mdelay(CY_DLY_SYSINFO);
> + }
> + }
> + }
> + /* switch back to Operational mode */
> + cyttsp_debug("switch back to operational mode \n");
> + if (!(retval < CY_OK)) {
> + host_reg = CY_OP_MODE/* + CY_LOW_PWR_MODE*/;
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(host_reg), &host_reg);
> + /* wait for TTSP Device to complete
> + * switch to Operational mode */
> + mdelay(1000);
> + }
> + }
> + /* init gesture setup;
> + * this is required even if not using gestures
> + * in order to set the active distance */
> + if (!(retval < CY_OK)) {
> + u8 gesture_setup;
> + cyttsp_debug("init gesture setup \n");
> + gesture_setup = ts->platform_data->gest_set;
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_GEST_SET,
> + sizeof(gesture_setup), &gesture_setup);
> + mdelay(CY_DLY_DFLT);
> + }
> +
> + if (!(retval < CY_OK))
> + ts->platform_data->power_state = CY_ACTIVE_STATE;
> + else
> + ts->platform_data->power_state = CY_IDLE_STATE;
> +
> + cyttsp_debug("Retval=%d Power state is %s\n", \
> + retval, \
> + ts->platform_data->power_state == CY_ACTIVE_STATE ? \
> + "ACTIVE" : "IDLE");

Whole function looks scary and hard to understand. Is it possible to break it into the smaller
functionality so that it becomes easy to understand.

> +
> + return retval;
> +}
> +
> +/* cyttsp_initialize: Driver Initialization. This function takes
> + * care of the following tasks:
> + * 1. Create and register an input device with input layer
> + * 2. Take CYTTSP device out of bootloader mode; go operational
> + * 3. Start any timers/Work queues. */
> +static int cyttsp_initialize(struct i2c_client *client, struct cyttsp *ts)
> +{
> + struct input_dev *input_device;
> + int error = 0;
> + int retval = CY_OK;
> + u8 id;
> +
> + /* Create the input device and register it. */
> + input_device = input_allocate_device();
> + if (!input_device) {
> + error = -ENOMEM;
> + cyttsp_xdebug1("err input allocate device\n");
> + goto error_free_device;
> + }
> +
> + if (!client) {
> + error = ~ENODEV;
> + cyttsp_xdebug1("err client is Null\n");
> + goto error_free_device;
> + }

Why you are checking !client here?

> +
> + if (!ts) {
> + error = ~ENODEV;

~? It should be -ENODEV, right?

> + cyttsp_xdebug1("err context is Null\n");
> + goto error_free_device;
> + }
> +
> + ts->input = input_device;
> + input_device->name = CY_I2C_NAME;
> + input_device->phys = ts->phys;
> + input_device->dev.parent = &client->dev;
> +
> + /* init the touch structures */
> + ts->num_prv_st_tch = CY_NTCH;
> + for (id = 0; id < CY_NUM_TRK_ID; id++) {
> + ts->act_trk[id] = CY_NTCH;
> + ts->prv_mt_pos[id][CY_XPOS] = 0;
> + ts->prv_mt_pos[id][CY_YPOS] = 0;
> + }
> +
> + for (id = 0; id < CY_NUM_MT_TCH_ID; id++)
> + ts->prv_mt_tch[id] = CY_IGNR_TCH;
> +
> + for (id = 0; id < CY_NUM_ST_TCH_ID; id++)
> + ts->prv_st_tch[id] = CY_IGNR_TCH;
> +
> + set_bit(EV_SYN, input_device->evbit);
> + set_bit(EV_KEY, input_device->evbit);
> + set_bit(EV_ABS, input_device->evbit);
> + set_bit(BTN_TOUCH, input_device->keybit);
> + set_bit(BTN_2, input_device->keybit);

You need not use atomic versions. Please use __set_bit.

> + if (ts->platform_data->use_gestures)
> + set_bit(BTN_3, input_device->keybit);
> +
> + input_set_abs_params(input_device,
> + ABS_X, 0, ts->platform_data->maxx, 0, 0);
> + input_set_abs_params(input_device,
> + ABS_Y, 0, ts->platform_data->maxy, 0, 0);
> + input_set_abs_params(input_device,
> + ABS_TOOL_WIDTH, 0, CY_LARGE_TOOL_WIDTH, 0 , 0);
> + input_set_abs_params(input_device,
> + ABS_PRESSURE, 0, CY_MAXZ, 0, 0);
> + input_set_abs_params(input_device,
> + ABS_HAT0X, 0, ts->platform_data->maxx, 0, 0);
> + input_set_abs_params(input_device,
> + ABS_HAT0Y, 0, ts->platform_data->maxy, 0, 0);

Why you are using HATxx? MT should be able to satisfy all the requirements.

> + if (ts->platform_data->use_gestures) {
> + input_set_abs_params(input_device,
> + ABS_HAT1X, 0, CY_MAXZ, 0, 0);
> + input_set_abs_params(input_device,
> + ABS_HAT1Y, 0, CY_MAXZ, 0, 0);
> + }
> + if (ts->platform_data->use_mt) {
> + input_set_abs_params(input_device,
> + ABS_MT_POSITION_X, 0, ts->platform_data->maxx, 0, 0);
> + input_set_abs_params(input_device,
> + ABS_MT_POSITION_Y, 0, ts->platform_data->maxy, 0, 0);
> + input_set_abs_params(input_device,
> + ABS_MT_TOUCH_MAJOR, 0, CY_MAXZ, 0, 0);
> + input_set_abs_params(input_device,
> + ABS_MT_WIDTH_MAJOR, 0, CY_LARGE_TOOL_WIDTH, 0, 0);
> + if (ts->platform_data->use_trk_id) {
> + input_set_abs_params(input_device,
> + ABS_MT_TRACKING_ID, 0, CY_NUM_TRK_ID, 0, 0);
> + }
> + }
> +
> + /* set dummy key to make driver work with virtual keys */
> + input_set_capability(input_device, EV_KEY, KEY_PROG1);

What is virtual keys and how they are supported?

> +
> + cyttsp_info("%s: Register input device\n", CY_I2C_NAME);
> + error = input_register_device(input_device);
> + if (error) {
> + cyttsp_alert("%s: Failed to register input device\n", \
> + CY_I2C_NAME);
> + retval = error;
> + goto error_free_device;
> + }
> +
> + /* Prepare our worker structure prior to setting up the timer/ISR */
> + INIT_WORK(&ts->work, cyttsp_xy_worker);
> +
> + /* Power on the chip and make sure that I/Os are set as specified
> + * in the platform */
> + if (ts->platform_data->init)
> + retval = ts->platform_data->init(client);
> +
> + if (!(retval < CY_OK))
> + retval = cyttsp_power_on(ts);
> +
> + if (retval < 0)
> + goto error_free_device;

Wrong.

if (!rc) {
rc = power_on(ts);
if (!rc) {
rc = -Exxx;
goto error_path;
}
}

> +
> + /* Timer or Interrupt setup */
> + if (ts->client->irq == 0) {
> + cyttsp_info("Setting up timer\n");
> + setup_timer(&ts->timer, cyttsp_timer, (unsigned long) ts);
> + mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);

Please support only one mode in the driver. Most of the time polling mode is used
only during early development phase when the IRQs doesn't work, but we don't want to carry
this code here.

Please remove polling mode code.

> + } else {
> + cyttsp_info("Setting up interrupt\n");
> + /* request_irq() will also call enable_irq() */
> + error = request_irq(client->irq, cyttsp_irq,
> + IRQF_TRIGGER_FALLING,
> + client->dev.driver->name, ts);

Please use request_threaded_irq(...) with IRQF_ONESHOT flag.

> + if (error) {
> + cyttsp_alert("error: could not request irq\n");
> + retval = error;
> + goto error_free_irq;
> + }
> + }
> +
> + irq_cnt = 0;
> + irq_cnt_total = 0;
> + irq_err_cnt = 0;
> +
> + atomic_set(&ts->irq_enabled, 1);
> + retval = device_create_file(&ts->client->dev, &dev_attr_irq_enable);
> + if (retval < CY_OK) {
> + cyttsp_alert("File device creation failed: %d\n", retval);
> + retval = -ENODEV;
> + goto error_free_irq;
> + }
> +
> + cyttsp_info("%s: Successful registration\n", CY_I2C_NAME);
> + goto success;
> +
> +error_free_irq:
> + cyttsp_alert("Error: Failed to register IRQ handler\n");
> + free_irq(client->irq, ts);
> +
> +error_free_device:
> + if (input_device)
> + input_free_device(input_device);
> +
> +success:
> + return retval;
> +}
> +
> +/* I2C driver probe function */
> +static int __devinit cyttsp_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct cyttsp *ts;
> + int error;
> + int retval = CY_OK;

Please don't define your own error return codes. Use appropriate one
from the kernel like say -EINVAL etc.,

> +
> + cyttsp_info("Start Probe 1.2\n");

Please remove such debug statements. They are of no use.

I don't see call to i2c_check_functionality(...)

> +
> + /* allocate and clear memory */
> + ts = kzalloc(sizeof(struct cyttsp), GFP_KERNEL);
> + if (ts == NULL) {
> + cyttsp_xdebug1("err kzalloc for cyttsp\n");

Please use dev_dbg or pr_debug provided by kernel only. This comment applies to whole driver.
We don't need driver specific macros please.

> + retval = -ENOMEM;
> + }
> +
> + if (!(retval < CY_OK)) {
> + /* register driver_data */
> + ts->client = client;
> + ts->platform_data = client->dev.platform_data;
> + i2c_set_clientdata(client, ts);
> +
> + error = cyttsp_initialize(client, ts);
> + if (error) {
> + cyttsp_xdebug1("err cyttsp_initialize\n");
> + if (ts != NULL) {
> + /* deallocate memory */
> + kfree(ts);
> + }
> +/*
> + i2c_del_driver(&cyttsp_driver);
> +*/

Do you need this commented out code?

> + retval = -ENODEV;
> + } else
> + cyttsp_openlog();
> + }
> +
> +#ifdef CONFIG_HAS_EARLYSUSPEND
> + if (!(retval < CY_OK)) {
> + ts->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
> + ts->early_suspend.suspend = cyttsp_early_suspend;
> + ts->early_suspend.resume = cyttsp_late_resume;
> + register_early_suspend(&ts->early_suspend);
> + }
> +#endif /* CONFIG_HAS_EARLYSUSPEND */

As mentioned above I want all the early suspend code to be removed. Explore RunTime PM framework of the kernel.

> +
> + cyttsp_info("Start Probe %s\n", \
> + (retval < CY_OK) ? "FAIL" : "PASS");
> +
> + return retval;
> +}
> +
> +/* Function to manage power-on resume */
> +static int cyttsp_resume(struct i2c_client *client)
> +{
> + struct cyttsp *ts;
> + int retval = CY_OK;
> +
> + cyttsp_debug("Wake Up\n");
> + ts = (struct cyttsp *) i2c_get_clientdata(client);

No need of casting.

> +
> + /* re-enable the interrupt prior to wake device */
> + if (ts->client->irq)
> + enable_irq(ts->client->irq);
> +
> + if (ts->platform_data->use_sleep &&
> + (ts->platform_data->power_state != CY_ACTIVE_STATE)) {
> + if (ts->platform_data->resume)
> + retval = ts->platform_data->resume(client);
> + if (!(retval < CY_OK)) {
> + retval = i2c_smbus_read_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(struct cyttsp_bootloader_data_t),
> + (u8 *)&g_bl_data);
> + if (!(retval < CY_OK) &&
> + GET_BOOTLOADERMODE(g_bl_data.bl_status)) {
> + u8 tries;
> + retval = i2c_smbus_write_i2c_block_data(
> + ts->client,
> + CY_REG_BASE,
> + sizeof(bl_cmd), bl_cmd);
> + /* switch back to operational mode */
> + tries = 0;
> + mdelay(10);
> + while (GET_BOOTLOADERMODE(g_bl_data.bl_status)
> + && tries++ < 10) {
> + mdelay(100);

Do you really need to use mdelay(...) in the resume path? Is there any way you could use msleep(..)
or say no delay at all.

> + cyttsp_putbl(ts, 16,
> + false, false, false);
> + }
> + }
> + }
> + }
> +
> + if (!(retval < CY_OK) &&
> + (GET_HSTMODE(g_bl_data.bl_file) == CY_OK)) {
> + ts->platform_data->power_state = CY_ACTIVE_STATE;
> +
> + /* re-enable the timer after resuming */
> + if (ts->client->irq == 0)
> + mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
> + } else
> + retval = -ENODEV;
> +
> + cyttsp_debug("Wake Up %s\n", \
> + (retval < CY_OK) ? "FAIL" : "PASS");
> +
> + return retval;
> +}
> +
> +
> +/* Function to manage low power suspend */
> +static int cyttsp_suspend(struct i2c_client *client, pm_message_t message)

Please put #ifdef CONFIG_PM around suspend/resume functions.

> +{
> + struct cyttsp *ts;
> + u8 sleep_mode = CY_OK;
> + int retval = CY_OK;
> +
> + cyttsp_debug("Enter Sleep\n");
> + ts = (struct cyttsp *) i2c_get_clientdata(client);

Casting from void * is not required. Please remove.

> +
> + /* disable worker */
> + if (ts->client->irq == 0)
> + del_timer(&ts->timer);
> + else
> + disable_irq_nosync(ts->client->irq);
> + retval = cancel_work_sync(&ts->work);
> +
> + if (retval)
> + enable_irq(ts->client->irq);
> +
> + if (!(retval < CY_OK)) {
> + if (ts->platform_data->use_sleep &&
> + (ts->platform_data->power_state == CY_ACTIVE_STATE)) {
> + if (ts->platform_data->use_sleep & CY_USE_DEEP_SLEEP_SEL)
> + sleep_mode = CY_DEEP_SLEEP_MODE;
> + else
> + sleep_mode = CY_LOW_PWR_MODE;
> +
> + retval = i2c_smbus_write_i2c_block_data(ts->client,
> + CY_REG_BASE,
> + sizeof(sleep_mode), &sleep_mode);
> + }
> + }
> +
> + if (!(retval < CY_OK)) {
> + if (sleep_mode == CY_DEEP_SLEEP_MODE)
> + ts->platform_data->power_state = CY_SLEEP_STATE;
> + else if (sleep_mode == CY_LOW_PWR_MODE)
> + ts->platform_data->power_state = CY_LOW_PWR_STATE;
> + }
> +
> + cyttsp_debug("Sleep Power state is %s\n", \
> + (ts->platform_data->power_state == CY_ACTIVE_STATE) ? \
> + "ACTIVE" : \
> + ((ts->platform_data->power_state == CY_SLEEP_STATE) ? \
> + "SLEEP" : "LOW POWER"));
> +
> + return retval;
> +}
> +
> +/* registered in driver struct */
> +static int __devexit cyttsp_remove(struct i2c_client *client)
> +{
> + struct cyttsp *ts;
> + int err;
> +
> + cyttsp_alert("Unregister\n");
> +
> + /* clientdata registered on probe */
> + ts = i2c_get_clientdata(client);
> + device_remove_file(&ts->client->dev, &dev_attr_irq_enable);
> +
> + /* Start cleaning up by removing any delayed work and the timer */
> + if (cancel_delayed_work((struct delayed_work *)&ts->work) < CY_OK)
> + cyttsp_alert("error: could not remove work from workqueue\n");
> +
> + /* free up timer or irq */
> + if (ts->client->irq == 0) {
> + err = del_timer(&ts->timer);
> + if (err < CY_OK)
> + cyttsp_alert("error: failed to delete timer\n");
> + } else
> + free_irq(client->irq, ts);
> +
> +#ifdef CONFIG_HAS_EARLYSUSPEND
> + unregister_early_suspend(&ts->early_suspend);
> +#endif /* CONFIG_HAS_EARLYSUSPEND */
> +
> + /* housekeeping */
> + if (ts != NULL)
> + kfree(ts);
> +
> + cyttsp_alert("Leaving\n");

I don't removal of input_dev structures.

> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_HAS_EARLYSUSPEND
> +static void cyttsp_early_suspend(struct early_suspend *handler)
> +{
> + struct cyttsp *ts;
> +
> + ts = container_of(handler, struct cyttsp, early_suspend);
> + cyttsp_suspend(ts->client, PMSG_SUSPEND);
> +}
> +
> +static void cyttsp_late_resume(struct early_suspend *handler)
> +{
> + struct cyttsp *ts;
> +
> + ts = container_of(handler, struct cyttsp, early_suspend);
> + cyttsp_resume(ts->client);
> +}
> +#endif /* CONFIG_HAS_EARLYSUSPEND */
> +
> +static int cyttsp_init(void)
> +{

__init

> + int ret;
> +
> + cyttsp_info("Cypress TrueTouch(R) Standard Product\n");
> + cyttsp_info("I2C Touchscreen Driver (Built %s @ %s)\n", \
> + __DATE__, __TIME__);
> +
> + cyttsp_ts_wq = create_singlethread_workqueue("cyttsp_ts_wq");
> + if (cyttsp_ts_wq == NULL) {
> + cyttsp_debug("No memory for cyttsp_ts_wq\n");
> + return -ENOMEM;
> + }
> +
> + ret = i2c_add_driver(&cyttsp_driver);
> +
> + return ret;
> +}
> +
> +static void cyttsp_exit(void)
> +{

__exit

> + if (cyttsp_ts_wq)
> + destroy_workqueue(cyttsp_ts_wq);
> + return i2c_del_driver(&cyttsp_driver);
> +}
> +
> +module_init(cyttsp_init);
> +module_exit(cyttsp_exit);
> +
> diff --git a/include/linux/cyttsp.h b/include/linux/cyttsp.h
> new file mode 100644
> index 0000000..2ab1a5c
> --- /dev/null
> +++ b/include/linux/cyttsp.h
> @@ -0,0 +1,649 @@
> +/* Header file for:
> + * Cypress TrueTouch(TM) Standard Product touchscreen drivers.
> + * include/linux/cyttsp.h
No file paths please.

> + *
> + * Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2, and only version 2, as published by the
> + * Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
> + *
> + * Cypress reserves the right to make changes without further notice
> + * to the materials described herein. Cypress does not assume any
> + * liability arising out of the application described herein.
> + *
> + * Contact Cypress Semiconductor at www.cypress.com
> + *
> + */
> +
> +
> +#ifndef __CYTTSP_H__
> +#define __CYTTSP_H__
> +
> +#include <linux/input.h>
> +#include <linux/timer.h>
> +#include <linux/workqueue.h>
> +#include <linux/kernel.h>
> +#include <linux/delay.h>
> +
> +#define CYPRESS_TTSP_NAME "cyttsp"
> +#define CY_I2C_NAME "cyttsp-i2c"
> +#define CY_SPI_NAME "cyttsp-spi"

I don't think that driver could be easily converted to fit with "spi",
as I see i2c calls all over.

> +
> +#ifdef CY_DECLARE_GLOBALS
> + uint32_t cyttsp_tsdebug;
> + module_param_named(tsdebug, cyttsp_tsdebug, uint, 0664);
> + uint32_t cyttsp_tsxdebug;
> + module_param_named(tsxdebug, cyttsp_tsxdebug, uint, 0664);
> +
> + uint32_t cyttsp_disable_touch;
> + module_param_named(disable_touch, cyttsp_disable_touch, uint, 0664);
> +#else
> + extern uint32_t cyttsp_tsdebug;
> + extern uint32_t cyttsp_tsxdebug;
> + extern uint32_t cyttsp_disable_touch;
> +#endif
> +
> +
> +
> +/******************************************************************************
> + * Global Control, Used to control the behavior of the driver
> + */
> +
> +/* defines for Gen2 (Txx2xx); Gen3 (Txx3xx)
> + * use these defines to set cyttsp_platform_data.gen in board config file
> + */
> +#define CY_GEN2 2
> +#define CY_GEN3 3
> +
> +/* define for using I2C driver
> + */
> +#define CY_USE_I2C_DRIVER
> +
> +/* defines for using SPI driver */
> +/*
> +#define CY_USE_SPI_DRIVER
> + */
> +#define CY_SPI_DFLT_SPEED_HZ 1000000
> +#define CY_SPI_MAX_SPEED_HZ 4000000
> +#define CY_SPI_SPEED_HZ CY_SPI_DFLT_SPEED_HZ
> +#define CY_SPI_BITS_PER_WORD 8
> +#define CY_SPI_DAV 139 /* set correct gpio id */
> +#define CY_SPI_BUFSIZE 512


No need of these #defines unless we see driver for SPI.

> +
> +
> +/* define for inclusion of TTSP App Update Load File
> + * use this define if update to the TTSP Device is desired
> + */
> +/*
> +#define CY_INCLUDE_LOAD_FILE
> +*/
> +
> +/* define if force new load file for bootloader load */
> +/*
> +#define CY_FORCE_FW_UPDATE
> +*/
> +
> +/* undef for production use */
> +/*
> + */
> +#define CY_USE_DEBUG

As indicated please use kernel dev_dbg/dev_xxx and pr_debug/pr_xxx friends.

> +
> +/* undef for irq use; use this define in the board configuration file */
> +/*
> +#define CY_USE_TIMER
> + */

As indicated above polling mode should be removed.

> +
> +/* undef to allow use of extra debug capability */
> +/*
> +#define CY_ALLOW_EXTRA_DEBUG
> +*/
> +
> +/* undef to remove additional debug prints */
> +/*
> +#define CY_USE_EXTRA_DEBUG
> +*/
> +
> +/* undef to remove additional debug prints */
> +/*
> +#define CY_USE_EXTRA_DEBUG1
> + */
> +
> +/* undef to use operational touch timer jiffies; else use test jiffies */
> +/*
> +#define CY_USE_TIMER_DEBUG
> + */
> +
> +/* define to use canned test data */
> +/*
> +#define CY_USE_TEST_DATA
> + */
> +
> +/* define to activate power management */
> +/*
> +#define CY_USE_LOW_POWER
> + */

Please see if you can use RunTime PM apis for LPM.

> +
> +/* define if wake on i2c addr is activated */
> +/*
> +#define CY_USE_DEEP_SLEEP
> + */
> +
> +/* define if gesture signaling is used
> + * and which gesture groups to use
> + */
> +/*
> +#define CY_USE_GEST
> +#define CY_USE_GEST_GRP1
> +#define CY_USE_GEST_GRP2
> +#define CY_USE_GEST_GRP3
> +#define CY_USE_GEST_GRP4
> + */
> +/* Active distance in pixels for a gesture to be reported
> + * if set to 0, then all gesture movements are reported
> + */
> +#define CY_ACT_DIST_DFLT 8
> +#define CY_ACT_DIST CY_ACT_DIST_DFLT
> +
> +/* define if MT signals are desired */
> +/*
> +*/
> +#define CY_USE_MT_SIGNALS
> +
> +/* define if MT tracking id signals are used */
> +/*
> +#define CY_USE_MT_TRACK_ID
> + */
> +
> +/* define if ST signals are required */
> +/*
> +#define CY_USE_ST_SIGNALS
> +*/
> +
> +/* define to send handshake to device */
> +/*
> +#define CY_USE_HNDSHK
> +*/
> +
> +/* define if log all raw motion signals to a sysfs file */
> +/*
> +#define CY_LOG_TO_FILE
> +*/
> +
> +
> +/* End of the Global Control section
> + ******************************************************************************
> + */
> +#define CY_DIFF(m, n) ((m) != (n))
> +
> +#ifdef CY_LOG_TO_FILE
> + #define cyttsp_openlog() /* use sysfs */
> +#else
> + #define cyttsp_openlog()
> +#endif /* CY_LOG_TO_FILE */
> +
> +/* see kernel.h for pr_xxx def'ns */
> +#define cyttsp_info(f, a...) pr_info("%s:" f, __func__ , ## a)
> +#define cyttsp_error(f, a...) pr_err("%s:" f, __func__ , ## a)
> +#define cyttsp_alert(f, a...) pr_alert("%s:" f, __func__ , ## a)
> +
> +#ifdef CY_USE_DEBUG
> + #define cyttsp_debug(f, a...) pr_alert("%s:" f, __func__ , ## a)
> +#else
> + #define cyttsp_debug(f, a...) {if (cyttsp_tsdebug) \
> + pr_alert("%s:" f, __func__ , ## a); }
> +#endif /* CY_USE_DEBUG */
> +
> +#ifdef CY_ALLOW_EXTRA_DEBUG
> +#ifdef CY_USE_EXTRA_DEBUG
> + #define cyttsp_xdebug(f, a...) pr_alert("%s:" f, __func__ , ## a)
> +#else
> + #define cyttsp_xdebug(f, a...) {if (cyttsp_tsxdebug) \
> + pr_alert("%s:" f, __func__ , ## a); }
> +#endif /* CY_USE_EXTRA_DEBUG */
> +
> +#ifdef CY_USE_EXTRA_DEBUG1
> + #define cyttsp_xdebug1(f, a...) pr_alert("%s:" f, __func__ , ## a)
> +#else
> + #define cyttsp_xdebug1(f, a...)
> +#endif /* CY_USE_EXTRA_DEBUG1 */
> +#else
> + #define cyttsp_xdebug(f, a...)
> + #define cyttsp_xdebug1(f, a...)
> +#endif /* CY_ALLOW_EXTRA_DEBUG */

Please remove customized debugs.

> +
> +#ifdef CY_USE_TIMER_DEBUG
> + #define TOUCHSCREEN_TIMEOUT (msecs_to_jiffies(1000))
> +#else
> + #define TOUCHSCREEN_TIMEOUT (msecs_to_jiffies(28))
> +#endif
> +



> +/* reduce extra signals in MT only build
> + * be careful not to lose backward compatibility for pre-MT apps
> + */
> +#ifdef CY_USE_ST_SIGNALS
> + #define CY_USE_ST 1
> +#else
> + #define CY_USE_ST 0
> +#endif /* CY_USE_ST_SIGNALS */
> +
> +/* rely on kernel input.h to define Multi-Touch capability */
> +/* if input.h defines the Multi-Touch signals, then use MT */
> +#if defined(ABS_MT_TOUCH_MAJOR) && defined(CY_USE_MT_SIGNALS)
> + #define CY_USE_MT 1
> + #define CY_MT_SYNC(input) input_mt_sync(input)
> +#else

I don't think we need such hacks, as latest kernel supports MT.

> + #define CY_USE_MT 0
> + #define CY_MT_SYNC(input)
> + /* the following includes are provided to ensure a compile;
> + * the code that compiles with these defines will not be executed if
> + * the CY_USE_MT is properly used in the platform structure init
> + */
> + #ifndef ABS_MT_TOUCH_MAJOR
> + #define ABS_MT_TOUCH_MAJOR 0x30 /* touching ellipse */
> + #define ABS_MT_TOUCH_MINOR 0x31 /* (omit if circular) */
> + #define ABS_MT_WIDTH_MAJOR 0x32 /* approaching ellipse */
> + #define ABS_MT_WIDTH_MINOR 0x33 /* (omit if circular) */
> + #define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
> + #define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
> + #define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
> + #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
> + #define ABS_MT_BLOB_ID 0x38 /* Group set of pkts as blob */
> + #endif /* ABS_MT_TOUCH_MAJOR */
> +#endif /* ABS_MT_TOUCH_MAJOR and CY_USE_MT_SIGNALS */
> +#if defined(ABS_MT_TRACKING_ID) && defined(CY_USE_MT_TRACK_ID)
> + #define CY_USE_TRACKING_ID 1
> +#else
> + #define CY_USE_TRACKING_ID 0
> +/* define only if not defined already by system;
> + * value based on linux kernel 2.6.30.10
> + */
> +#ifndef ABS_MT_TRACKING_ID
> + #define ABS_MT_TRACKING_ID (ABS_MT_BLOB_ID+1)
> +#endif
> +#endif /* ABS_MT_TRACKING_ID */
> +
> +#ifdef CY_USE_DEEP_SLEEP
> + #define CY_USE_DEEP_SLEEP_SEL 0x80
> +#else
> + #define CY_USE_DEEP_SLEEP_SEL 0x00
> +#endif
> +#ifdef CY_USE_LOW_POWER
> + #define CY_USE_SLEEP (CY_USE_DEEP_SLEEP_SEL | 0x01)
> +#else
> + #define CY_USE_SLEEP 0x00
> +#endif /* CY_USE_LOW_POWER */
> +
> +#ifdef CY_USE_TEST_DATA
> + #define cyttsp_testdat(ray1, ray2, sizeofray) \
> + { \
> + int i; \
> + u8 *up1 = (u8 *)ray1; \
> + u8 *up2 = (u8 *)ray2; \
> + for (i = 0; i < sizeofray; i++) { \
> + up1[i] = up2[i]; \
> + } \
> + }
> +#else
> + #define cyttsp_testdat(xy, test_xy, sizeofray)
> +#endif /* CY_USE_TEST_DATA */
> +
> +/* helper macros */
> +#define GET_NUM_TOUCHES(x) ((x) & 0x0F)
> +#define GET_TOUCH1_ID(x) (((x) & 0xF0) >> 4)
> +#define GET_TOUCH2_ID(x) ((x) & 0x0F)
> +#define GET_TOUCH3_ID(x) (((x) & 0xF0) >> 4)
> +#define GET_TOUCH4_ID(x) ((x) & 0x0F)
> +#define IS_LARGE_AREA(x) (((x) & 0x10) >> 4)
> +#define FLIP_DATA_FLAG 0x01
> +#define REVERSE_X_FLAG 0x02
> +#define REVERSE_Y_FLAG 0x04
> +#define FLIP_DATA(flags) ((flags) & FLIP_DATA_FLAG)
> +#define REVERSE_X(flags) ((flags) & REVERSE_X_FLAG)
> +#define REVERSE_Y(flags) ((flags) & REVERSE_Y_FLAG)
> +#define FLIP_XY(x, y) { \
> + u16 tmp; \
> + tmp = (x); \
> + (x) = (y); \
> + (y) = tmp; \
> + }
> +#define INVERT_X(x, xmax) ((xmax) - (x))
> +#define INVERT_Y(y, ymax) ((ymax) - (y))
> +#define SET_HSTMODE(reg, mode) ((reg) & (mode))
> +#define GET_HSTMODE(reg) ((reg & 0x70) >> 4)
> +#define GET_BOOTLOADERMODE(reg) ((reg & 0x10) >> 4)
> +
> +/* constant definitions */
> +/* maximum number of concurrent ST track IDs */
> +#define CY_NUM_ST_TCH_ID 2
> +
> +/* maximum number of concurrent MT track IDs */
> +#define CY_NUM_MT_TCH_ID 4
> +
> +/* maximum number of track IDs */
> +#define CY_NUM_TRK_ID 16
> +
> +#define CY_NTCH 0 /* no touch (lift off) */
> +#define CY_TCH 1 /* active touch (touchdown) */
> +#define CY_ST_FNGR1_IDX 0
> +#define CY_ST_FNGR2_IDX 1
> +#define CY_MT_TCH1_IDX 0
> +#define CY_MT_TCH2_IDX 1
> +#define CY_MT_TCH3_IDX 2
> +#define CY_MT_TCH4_IDX 3
> +#define CY_XPOS 0
> +#define CY_YPOS 1
> +#define CY_IGNR_TCH (-1)
> +#define CY_SMALL_TOOL_WIDTH 10
> +#define CY_LARGE_TOOL_WIDTH 255
> +#define CY_REG_BASE 0x00
> +#define CY_REG_GEST_SET 0x1E
> +#define CY_REG_ACT_INTRVL 0x1D
> +#define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL+1)
> +#define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT+1)
> +#define CY_SOFT_RESET ((1 << 0))
> +#define CY_DEEP_SLEEP ((1 << 1))
> +#define CY_LOW_POWER ((1 << 2))
> +#define CY_MAXZ 255
> +#define CY_OK 0
> +#define CY_INIT 1
> +#define CY_DLY_DFLT 10 /* ms */
> +#define CY_DLY_SYSINFO 20 /* ms */
> +#define CY_DLY_BL 300
> +#define CY_DLY_DNLOAD 100 /* ms */
> +#define CY_NUM_RETRY 4 /* max num touch data read */
> +
> +/* handshake bit in the hst_mode reg */
> +#define CY_HNDSHK_BIT 0x80
> +#ifdef CY_USE_HNDSHK
> + #define CY_SEND_HNDSHK 1
> +#else
> + #define CY_SEND_HNDSHK 0
> +#endif
> +
> +/* Bootloader File 0 offset */
> +#define CY_BL_FILE0 0x00
> +
> +/* Bootloader command directive */
> +#define CY_BL_CMD 0xFF
> +
> +/* Bootloader Initiate Bootload */
> +#define CY_BL_INIT_LOAD 0x38
> +
> +/* Bootloader Write a Block */
> +#define CY_BL_WRITE_BLK 0x39
> +
> +/* Bootloader Terminate Bootload */
> +#define CY_BL_TERMINATE 0x3B
> +
> +/* Bootloader Exit and Verify Checksum command */
> +#define CY_BL_EXIT 0xA5
> +
> +/* Bootloader default keys */
> +#define CY_BL_KEY0 0x00
> +#define CY_BL_KEY1 0x01
> +#define CY_BL_KEY2 0x02
> +#define CY_BL_KEY3 0x03
> +#define CY_BL_KEY4 0x04
> +#define CY_BL_KEY5 0x05
> +#define CY_BL_KEY6 0x06
> +#define CY_BL_KEY7 0x07
> +
> +/* Active Power state scanning/processing refresh interval */
> +#define CY_ACT_INTRVL_DFLT 0x00
> +
> +/* touch timeout for the Active power */
> +#define CY_TCH_TMOUT_DFLT 0xFF
> +
> +/* Low Power state scanning/processing refresh interval */
> +#define CY_LP_INTRVL_DFLT 0x0A
> +
> +#define CY_IDLE_STATE 0
> +#define CY_ACTIVE_STATE 1
> +#define CY_LOW_PWR_STATE 2
> +#define CY_SLEEP_STATE 3
> +
> +/* device mode bits */
> +#define CY_OP_MODE 0x00
> +#define CY_SYSINFO_MODE 0x10
> +
> +/* power mode select bits */
> +#define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */
> +#define CY_DEEP_SLEEP_MODE 0x02
> +#define CY_LOW_PWR_MODE 0x04
> +
> +#define CY_NUM_KEY 8
> +
> +#ifdef CY_USE_GEST
> + #define CY_USE_GESTURES 1
> +#else
> + #define CY_USE_GESTURES 0
> +#endif /* CY_USE_GESTURE_SIGNALS */
> +
> +#ifdef CY_USE_GEST_GRP1
> + #define CY_GEST_GRP1 0x10
> +#else
> + #define CY_GEST_GRP1 0x00
> +#endif /* CY_USE_GEST_GRP1 */
> +#ifdef CY_USE_GEST_GRP2
> + #define CY_GEST_GRP2 0x20
> +#else
> + #define CY_GEST_GRP2 0x00
> +#endif /* CY_USE_GEST_GRP2 */
> +#ifdef CY_USE_GEST_GRP3
> + #define CY_GEST_GRP3 0x40
> +#else
> + #define CY_GEST_GRP3 0x00
> +#endif /* CY_USE_GEST_GRP3 */
> +#ifdef CY_USE_GEST_GRP4
> + #define CY_GEST_GRP4 0x80
> +#else
> + #define CY_GEST_GRP4 0x00
> +#endif /* CY_USE_GEST_GRP4 */
> +
> +
> +struct cyttsp_platform_data {
> + u32 maxx;
> + u32 maxy;
> + u32 flags;
> + u8 gen;
> + u8 use_st;
> + u8 use_mt;
> + u8 use_hndshk;
> + u8 use_trk_id;
> + u8 use_sleep;
> + u8 use_gestures;
> + u8 gest_set;
> + u8 act_intrvl;
> + u8 tch_tmout;
> + u8 lp_intrvl;
> + u8 power_state;
> +#ifdef CY_USE_I2C_DRIVER
> + s32 (*init)(struct i2c_client *client);
> + s32 (*resume)(struct i2c_client *client);
> +#endif
> +#ifdef CY_USE_SPI_DRIVER
> + s32 (*init)(struct spi_device *spi);
> + s32 (*resume)(struct spi_device *spi);
> +#endif
> +};
> +
> +/* TrueTouch Standard Product Gen3 (Txx3xx) interface definition */
> +struct cyttsp_gen3_xydata_t {
> + u8 hst_mode;
> + u8 tt_mode;
> + u8 tt_stat;
> + u16 x1 __attribute__ ((packed));
> + u16 y1 __attribute__ ((packed));
> + u8 z1;
> + u8 touch12_id;
> + u16 x2 __attribute__ ((packed));
> + u16 y2 __attribute__ ((packed));
> + u8 z2;
> + u8 gest_cnt;
> + u8 gest_id;
> + u16 x3 __attribute__ ((packed));
> + u16 y3 __attribute__ ((packed));
> + u8 z3;
> + u8 touch34_id;
> + u16 x4 __attribute__ ((packed));
> + u16 y4 __attribute__ ((packed));
> + u8 z4;
> + u8 tt_undef[3];
> + u8 gest_set;
> + u8 tt_reserved;
> +};

Do you really need this to be exported in the header file? If possible move it to the .c file.

> +
> +/* TrueTouch Standard Product Gen2 (Txx2xx) interface definition */
> +#define CY_GEN2_NOTOUCH 0x03 /* Both touches removed */
> +#define CY_GEN2_GHOST 0x02 /* ghost */
> +#define CY_GEN2_2TOUCH 0x03 /* 2 touch; no ghost */
> +#define CY_GEN2_1TOUCH 0x01 /* 1 touch only */
> +#define CY_GEN2_TOUCH2 0x01 /* 1st touch removed;
> + * 2nd touch remains */
> +struct cyttsp_gen2_xydata_t {
> + u8 hst_mode;
> + u8 tt_mode;
> + u8 tt_stat;
> + u16 x1 __attribute__ ((packed));
> + u16 y1 __attribute__ ((packed));
> + u8 z1;
> + u8 evnt_idx;
> + u16 x2 __attribute__ ((packed));
> + u16 y2 __attribute__ ((packed));
> + u8 tt_undef1;
> + u8 gest_cnt;
> + u8 gest_id;
> + u8 tt_undef[14];
> + u8 gest_set;
> + u8 tt_reserved;
> +};
> +
> +/* TTSP System Information interface definition */
> +struct cyttsp_sysinfo_data_t {
> + u8 hst_mode;
> + u8 mfg_cmd;
> + u8 mfg_stat;
> + u8 cid[3];
> + u8 tt_undef1;
> + u8 uid[8];
> + u8 bl_verh;
> + u8 bl_verl;
> + u8 tts_verh;
> + u8 tts_verl;
> + u8 app_idh;
> + u8 app_idl;
> + u8 app_verh;
> + u8 app_verl;
> + u8 tt_undef[6];
> + u8 act_intrvl;
> + u8 tch_tmout;
> + u8 lp_intrvl;
> +};

Ditto.

> +
> +/* TTSP Bootloader Register Map interface definition */
> +#define CY_BL_CHKSUM_OK 0x01
> +struct cyttsp_bootloader_data_t {
> + u8 bl_file;
> + u8 bl_status;
> + u8 bl_error;
> + u8 blver_hi;
> + u8 blver_lo;
> + u8 bld_blver_hi;
> + u8 bld_blver_lo;
> + u8 ttspver_hi;
> + u8 ttspver_lo;
> + u8 appid_hi;
> + u8 appid_lo;
> + u8 appver_hi;
> + u8 appver_lo;
> + u8 cid_0;
> + u8 cid_1;
> + u8 cid_2;
> +};
> +
> +#define cyttsp_wake_data_t cyttsp_gen3_xydata_t
> +#ifdef CY_DECLARE_GLOBALS
> + #ifdef CY_INCLUDE_LOAD_FILE
> + /* this file declares:
> + * firmware download block array (cyttsp_fw[]),
> + * the number of command block records (cyttsp_fw_records),
> + * and the version variables
> + */
> + #include "cyttsp_fw.h" /* imports cyttsp_fw[] array */
> + #define cyttsp_app_load() 1
> + #ifdef CY_FORCE_FW_UPDATE
> + #define cyttsp_force_fw_load() 1
> + #else
> + #define cyttsp_force_fw_load() 0
> + #endif
> +
> + #else
> + /* the following declarations are to allow
> + * some debugging capability
> + */
> + unsigned char cyttsp_fw_tts_verh = 0x00;
> + unsigned char cyttsp_fw_tts_verl = 0x01;
> + unsigned char cyttsp_fw_app_idh = 0x02;
> + unsigned char cyttsp_fw_app_idl = 0x03;
> + unsigned char cyttsp_fw_app_verh = 0x04;
> + unsigned char cyttsp_fw_app_verl = 0x05;
> + unsigned char cyttsp_fw_cid_0 = 0x06;
> + unsigned char cyttsp_fw_cid_1 = 0x07;
> + unsigned char cyttsp_fw_cid_2 = 0x08;
> + #define cyttsp_app_load() 0
> + #define cyttsp_force_fw_load() 0
> + #endif
> + #define cyttsp_tts_verh() cyttsp_fw_tts_verh
> + #define cyttsp_tts_verl() cyttsp_fw_tts_verl
> + #define cyttsp_app_idh() cyttsp_fw_app_idh
> + #define cyttsp_app_idl() cyttsp_fw_app_idl
> + #define cyttsp_app_verh() cyttsp_fw_app_verh
> + #define cyttsp_app_verl() cyttsp_fw_app_verl
> + #define cyttsp_cid_0() cyttsp_fw_cid_0
> + #define cyttsp_cid_1() cyttsp_fw_cid_1
> + #define cyttsp_cid_2() cyttsp_fw_cid_2
> + #ifdef CY_USE_TEST_DATA
> + static struct cyttsp_gen2_xydata_t tt_gen2_testray[] = {
> + {0x00}, {0x00}, {0x04},
> + {0x4000}, {0x8000}, {0x80},
> + {0x03},
> + {0x2000}, {0x1000}, {0x00},
> + {0x00},
> + {0x00},
> + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
> + {0x00},
> + {0x00}
> + };
> +
> + static struct cyttsp_gen3_xydata_t tt_gen3_testray[] = {
> + {0x00}, {0x00}, {0x04},
> + {0x4000}, {0x8000}, {0x80},
> + {0x12},
> + {0x2000}, {0x1000}, {0xA0},
> + {0x00}, {0x00},
> + {0x8000}, {0x4000}, {0xB0},
> + {0x34},
> + {0x4000}, {0x1000}, {0xC0},
> + {0x00, 0x00, 0x00},
> + {0x00},
> + {0x00}
> + };
> + #endif /* CY_USE_TEST_DATA */
> +
> +#else
> + extern u8 g_appload_ray[];
> +#endif
> +
> +#endif /* __CYTTSP_H__ */

---Trilok Soni

--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.


\
 
 \ /
  Last update: 2010-07-13 09:35    [W:0.171 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site