lkml.org 
[lkml]   [2010]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: add Honeywell hmc5843 3-Axis Magnetometer (digital compass) driver.


> Steven King - 2009-12-11 06:50:12
> Signed-off-by: Steven King <sfking@fdwdc.com>
>
> ---
>
> drivers/input/misc/Kconfig | 10 +
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/hmc5843.c | 515
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 526 insertions(+), 0 deletions(-)
> create mode 100644 drivers/input/misc/hmc5843.c
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
> Jonathan Cameron - 2009-12-11 12:45:24
> Dear Steven,
>
> Mostly looks good to me. Couple of minor comments inline below.
>
> I'd also like to see some documentation for this chip. We don't really
> want people to have to read the data sheet in order to find out what the
> various modes and frequency settings are for example. Datasheets have
> a nasty habit of disappearing in the long run. Probably needs something
> in Documentation directory rather than merely comments in the code.
>
> Only one I'm really fussy about is making sure you use the unsigned
> strict_strtoul where appropriate. Fix that and you can add
> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
>
> I'm not entirely convinced this one should be in input as I can't really
> believe
> it is commonly used as an input device? Over to Dmitry and others for
> that
> though. We can always move it at a later date. The requirements of a
> chip
> this simple (interface wise) would make that trivial.
So can we recommend it in drivers/misc with input interface.

>
> Jonathan
> > Signed-off-by: Steven King <sfking@fdwdc.com>
> >
> > ---
> >
> > drivers/input/misc/Kconfig | 10 +
> > drivers/input/misc/Makefile | 1 +
> > drivers/input/misc/hmc5843.c | 515
> ++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 526 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/input/misc/hmc5843.c
> >
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index a9bb254..7564b96 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -317,4 +317,14 @@ config INPUT_PCAP
> > To compile this driver as a module, choose M here: the
> > module will be called pcap_keys.
> >
> > +config INPUT_HMC5843
> > + tristate "Honeywell HMC5843 3-Axis Magnetometer"
> > + depends on I2C && SYSFS
> > + select INPUT_POLLDEV
> > + help
> > + Say Y here to add support for the Honeywell HMC 5843 3-Axis
> > + Magnetometer (digital compass).
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called hmc5843.
> > endif
> > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > index a8b8485..825b70c 100644
> > --- a/drivers/input/misc/Makefile
> > +++ b/drivers/input/misc/Makefile
> > @@ -30,4 +30,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-
> cir.o
> > obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
> > obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
> > obj-$(CONFIG_INPUT_YEALINK) += yealink.o
> > +obj-$(CONFIG_INPUT_HMC5843) += hmc5843.o
> >
> > diff --git a/drivers/input/misc/hmc5843.c b/drivers/input/misc/hmc5843.c
> > new file mode 100644
> > index 0000000..51bb86c
> > --- /dev/null
> > +++ b/drivers/input/misc/hmc5843.c
> > @@ -0,0 +1,515 @@
> > +/*
> > + * Driver for the Honeywell HMC5843 3-Axis Magnetometer.
> > + *
> > + * Author: Steven King <sfking@fdwdc.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
> USA
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/jiffies.h>
> > +#include <linux/err.h>
> > +#include <linux/i2c.h>
> > +#include <linux/input-polldev.h>
> > +
> > +#define HMC5843_CFG_A_REG 0
> > +#define HMC5843_CFG_A_BIAS_MASK 0x03
> > +#define HMC5843_CFG_A_RATE_MASK 0x1c
> > +#define HMC5843_CFG_A_RATE_SHIFT 2
> > +#define HMC5843_CFG_B_REG 1
> > +#define MMC5843_CFG_B_GAIN_MASK 0xe0
> > +#define MMC5843_CFG_B_GAIN_SHIFT 5
> > +#define HMC5843_MODE_REG 2
> > +#define HMC5843_MODE_REPEAT 0
> > +#define HMC5843_MODE_ONCE 1
> > +#define HMC5843_MODE_IDLE 2
> > +#define HMC5843_MODE_SLEEP 3
> > +#define HMC5843_X_DATA_REG 3
> > +#define HMC5843_Y_DATA_REG 5
> > +#define HMC5843_Z_DATA_REG 7
> > +#define HMC5843_STATUS_REG 9
> > +#define HMC5843_STATUS_REN 0x04
> > +#define HMC5843_STATUS_LOCK 0x02
> > +#define HMC5843_STATUS_RDY 0x01
> > +#define HMC5843_ID_REG_A 10
> > +#define HMC5843_ID_REG_B 11
> > +#define HMC5843_ID_REG_C 12
> > +#define HMC5843_LAST_REG 12
> > +#define HMC5843_NUM_REG 13
> > +
> > +struct hmc5843 {
> > + struct i2c_client *client;
> > + struct mutex lock;
> > + struct input_polled_dev *ipdev;
> Size is of this is rather large given it can only be 0,1,2. U8 would
> make more sense. Same is true of the other elements here. It's a small
> saving, but why bloat the kernel for no gain?
> > + int bias;
> > + int gain;
> rate is only between 0 and 6 so again U8. On this element, might it be
> better to go with meaningful readings rather than an index? Not sure what
> similar drivers do.
> > + int rate;
>
> > + int mode;
> > + int index;
> > +};
> > +
> > +/* interval between samples for the different rates, in msecs */
> > +static const unsigned int hmc5843_sample_interval[] = {
> > + 1000 * 2, 1000, 1000 / 2, 1000 / 5,
> > + 1000 / 10, 1000 / 20, 1000 / 50,
> > +};
> > +
> > +/*
> > + * From the datasheet:
> > + *
> > + * The devices uses an address pointer to indicate which register
> location is
> > + * to be read from or written to. These pointer locations are sent from
> the
> > + * master to this slave device and succeed the 7-bit address plus 1 bit
> > + * read/write identifier.
> > + *
> > + * To minimize the communication between the master and this device,
> the
> > + * address pointer updated automatically without master intervention.
> This
> > + * automatic address pointer update has two additional features. First
> when
> > + * address 12 or higher is accessed the pointer updates to address 00
> and
> > + * secondly when address 09 is reached, the pointer rolls back to
> address 03.
> > + * Logically, the address pointer operation functions as shown below.
> > + *
> > + * If (address pointer = 09) then address pointer = 03
> > + * Else if (address pointer >= 12) then address pointer = 0
> > + * Else (address pointer) = (address pointer) + 1
> > + *
> > + * Since the set of operations performed by this driver is pretty
> simple,
> > + * we keep track of the register being written to when updating the
> > + * configuration and when reading data only update the address ptr when
> its not
> > + * pointing to the first data register.
> > +*/
> > +
> > +static int hmc5843_write_register(struct hmc5843 *hmc5843, int index)
> > +{
> > + u8 buf[2];
> > + int result;
> > +
> > + buf[0] = index;
> A switch statement might make this easier to read.
> > + if (index == HMC5843_CFG_A_REG)
> > + buf[1] = hmc5843->bias |
> > + (hmc5843->rate << HMC5843_CFG_A_RATE_SHIFT);
> > + else if (index == HMC5843_CFG_B_REG)
> > + buf[1] = hmc5843->gain << MMC5843_CFG_B_GAIN_SHIFT;
> > + else if (index == HMC5843_MODE_REG)
> > + buf[1] = hmc5843->mode;
> > + else
> > + return -EINVAL;
> > + result = i2c_master_send(hmc5843->client, buf, sizeof(buf));
> > +
> Blank line here is a bit unconventional. (feel free to ignore this sort of
> comment!)
> > + if (result != 2) {
> > + hmc5843->index = -1;
> > + return result;
> > + }
> > + hmc5843->index = index + 1;
> Fussy formatting puts a blank line here.
> > + return 0;
> > +}
> > +
> > +static int hmc5843_read_xyz(struct hmc5843 *hmc5843, int *x, int *y,
> int *z)
> > +{
> > + struct i2c_msg msgs[2];
> > + u8 buf[6];
> > + int n = 0;
> > + int result;
> > +
> > + if (hmc5843->index != HMC5843_X_DATA_REG) {
> > + buf[0] = HMC5843_X_DATA_REG;
> > +
> > + msgs[0].addr = hmc5843->client->addr;
> > + msgs[0].flags = 0;
> > + msgs[0].buf = buf;
> > + msgs[0].len = 1;
> > +
> > + hmc5843->index = HMC5843_X_DATA_REG;
> > + n = 1;
> > + }
> > + msgs[n].addr = hmc5843->client->addr;
> > + msgs[n].flags = I2C_M_RD;
> > + msgs[n].buf = buf;
> > + msgs[n].len = 6;
> > + ++n;
> > +
> > + result = i2c_transfer(hmc5843->client->adapter, msgs, n);
> > + if (result != n) {
> > + hmc5843->index = -1;
> > + return result;
> > + }
> > +
> > + *x = (((int)((s8)buf[0])) << 8) | buf[1];
> > + *y = (((int)((s8)buf[2])) << 8) | buf[3];
> > + *z = (((int)((s8)buf[4])) << 8) | buf[5];
> > + return 0;
> > +}
> > +
> > +/* sysfs stuff */
> > +
> > +/* bias */
> > +static ssize_t hmc5843_show_bias(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > +
> > + return sprintf(buf, "%d\n", hmc5843->bias);
> > +}
> > +
> > +static ssize_t hmc5843_store_bias(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > + unsigned long val;
> > + int status = count;
> > +
> > + if ((strict_strtol(buf, 10, &val) < 0) || (val > 2))
> > + return -EINVAL;
> > + mutex_lock(&hmc5843->lock);
> > + if (hmc5843->bias != val) {
> > + hmc5843->bias = val;
> > + status = hmc5843_write_register(hmc5843, HMC5843_CFG_A_REG);
> > + }
> > + mutex_unlock(&hmc5843->lock);
> > + return status;
> > +}
> > +
> > +static DEVICE_ATTR(bias, S_IWUSR | S_IRUGO, hmc5843_show_bias,
> > + hmc5843_store_bias);
> > +
> > +/* rate */
> > +static ssize_t hmc5843_show_rate(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > +
> > + return sprintf(buf, "%d\n", hmc5843->rate);
> > +}
> > +
> > +static ssize_t hmc5843_store_rate(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > + unsigned long val;
> > + int status = count;
> > + if ((strict_strtol(buf, 10, &val) < 0) || (val > 6))
> > + return -EINVAL;
> > + mutex_lock(&hmc5843->lock);
> > + if (hmc5843->rate != val) {
> > + hmc5843->rate = val;
> > + hmc5843->ipdev->poll_interval = hmc5843_sample_interval[val];
> > + status = hmc5843_write_register(hmc5843, HMC5843_CFG_A_REG);
> > + }
> > + mutex_unlock(&hmc5843->lock);
> > + return status;
> > +}
> > +
> > +static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, hmc5843_show_rate,
> > + hmc5843_store_rate);
> > +
> > +/* gain */
> > +static ssize_t hmc5843_show_gain(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > +
> > + return sprintf(buf, "%d\n", hmc5843->gain);
> > +}
> > +
> > +static ssize_t hmc5843_store_gain(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > + unsigned long val;
> > + int status = count;
> You want strict_strtoul as it is unsigned. (probably true elsewhere in
> driver
> I just noticed it here!)
> > + if ((strict_strtol(buf, 10, &val) < 0) || (val > 6))
> > + return -EINVAL;
> > + mutex_lock(&hmc5843->lock);
> > + if (hmc5843->gain != val) {
> > + hmc5843->gain = val;
> > + status = hmc5843_write_register(hmc5843, HMC5843_CFG_B_REG);
> > + }
> > + mutex_unlock(&hmc5843->lock);
> > + return status;
> > +}
> > +
> > +static DEVICE_ATTR(gain, S_IWUSR | S_IRUGO, hmc5843_show_gain,
> > + hmc5843_store_gain);
> > +
> > +/* mode */
> > +static ssize_t hmc5843_show_mode(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > +
> > + return sprintf(buf, "%d\n", hmc5843->mode);
> > +}
> > +
> > +static ssize_t hmc5843_store_mode(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t count)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > + unsigned long val;
> > + int status = count;
> > +
> strict_strtoul
> > + if ((strict_strtol(buf, 10, &val) < 0) || (val > 3))
> > + return -EINVAL;
> > + mutex_lock(&hmc5843->lock);
> > + if (hmc5843->mode != val) {
> > + hmc5843->mode = val;
> > + status = hmc5843_write_register(hmc5843, HMC5843_MODE_REG);
> > + }
> > + mutex_unlock(&hmc5843->lock);
> > + return status;
> > +}
> > +
> > +static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO, hmc5843_show_mode,
> > + hmc5843_store_mode);
> > +
> > +static struct attribute *hmc5843_attributes[] = {
> > + &dev_attr_bias.attr,
> > + &dev_attr_rate.attr,
> > + &dev_attr_gain.attr,
> > + &dev_attr_mode.attr,
> > + NULL,
> > +};
> > +
> > +static const struct attribute_group hmc5843_attr_group = {
> > + .attrs = hmc5843_attributes,
> > +};
> > +
> > +/* use polled input device */
> > +
> > +static void hmc5843_poll(struct input_polled_dev *ipdev)
> > +{
> > + struct hmc5843 *hmc5843 = ipdev->private;
> > + int x, y, z;
> > +
> > + mutex_lock(&hmc5843->lock);
> > + if (!hmc5843_read_xyz(hmc5843, &x, &y, &z)) {
> > + input_report_abs(ipdev->input, ABS_X, x);
> > + input_report_abs(ipdev->input, ABS_Y, y);
> > + input_report_abs(ipdev->input, ABS_Z, z);
> > + input_sync(ipdev->input);
> > + }
> > + mutex_unlock(&hmc5843->lock);
> > +}
> > +
> > +static int __devinit hmc5843_input_init(struct hmc5843 *hmc5843)
> > +{
> > + int status;
> > + struct input_polled_dev *ipdev;
> > +
> > + ipdev = input_allocate_polled_device();
> > + if (!ipdev) {
> > + dev_dbg(&hmc5843->client->dev, "error creating input
> device\n");
> > + return -ENOMEM;
> > + }
> > + ipdev->poll = hmc5843_poll;
> > + ipdev->poll_interval = hmc5843_sample_interval[hmc5843->rate];
> > + ipdev->private = hmc5843;
> > +
> > + ipdev->input->name = "Honeywell HMC5843 3-Axis Magnetometer";
> > + ipdev->input->phys = "hmc5843/input0";
> > + ipdev->input->id.bustype = BUS_HOST;
> > +
> > + set_bit(EV_ABS, ipdev->input->evbit);
> > +
> > + input_set_abs_params(ipdev->input, ABS_X, -2047, 2047, 0, 0);
> > + input_set_abs_params(ipdev->input, ABS_Y, -2047, 2047, 0, 0);
> > + input_set_abs_params(ipdev->input, ABS_Z, -2047, 2047, 0, 0);
> > +
> > + status = input_register_polled_device(ipdev);
> > + if (status) {
> > + dev_dbg(&hmc5843->client->dev,
> > + "error registering input device\n");
> > + input_free_polled_device(ipdev);
> > + goto exit;
> > + }
> > + hmc5843->ipdev = ipdev;
> > +exit:
> > + return status;
> > +}
> > +
> > +static int __devinit hmc5843_device_init(struct hmc5843 *hmc5843)
> > +{
> > + struct i2c_client *client = hmc5843->client;
> > + int status;
> > +
> > + struct i2c_msg msgs[2];
> > + u8 buf[6] = { HMC5843_ID_REG_A }; /* start reading at 1st id reg */
> > +
> > + msgs[0].addr = client->addr;
> > + msgs[0].flags = 0;
> > + msgs[0].buf = buf;
> > + msgs[0].len = 1;
> > + msgs[1].addr = client->addr;
> > + msgs[1].flags = I2C_M_RD;
> > + msgs[1].buf = buf; /* overwrite sent address on read */
> > + msgs[1].len = 6; /* 3 id regs + cfg_a, cfg_b & mode reg */
> > +
> > + status = i2c_transfer(client->adapter, msgs, 2);
> > + if (status != 2) {
> > + dev_dbg(&client->dev, "unable to contact device\n");
> > + return status;
> > + }
> > + if (strncmp(buf, "H43", 3)) {
> > + dev_dbg(&client->dev, "incorrect device id %-3.3s", buf);
> > + return -EINVAL;
> > + }
> > + /* the read will have wrapped to 0, bytes 3-6 are cfg_a, cfg_b, mode
> */
> > + hmc5843->bias = buf[3] & HMC5843_CFG_A_BIAS_MASK;
> > + hmc5843->rate = buf[3] >> HMC5843_CFG_A_RATE_SHIFT;
> > + hmc5843->gain = buf[4] >> MMC5843_CFG_B_GAIN_SHIFT;
> > + hmc5843->mode = buf[5];
> > +
> > + hmc5843->index = 3;
> > + mutex_init(&hmc5843->lock);
> > + return 0;
> > +}
> > +
> > +static int __devinit hmc5843_i2c_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + int status;
> > + struct hmc5843 *hmc5843;
> > +
> > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> > + dev_dbg(&client->dev, "adapter doesn't support I2C\n");
> > + return -ENODEV;
> > + }
> > +
> > + hmc5843 = kzalloc(sizeof(*hmc5843), GFP_KERNEL);
> > + if (!hmc5843) {
> > + dev_dbg(&client->dev, "unable to allocate memory\n");
> > + return -ENOMEM;
> > + }
> > +
> > + hmc5843->client = client;
> > + i2c_set_clientdata(client, hmc5843);
> > +
> > + status = hmc5843_device_init(hmc5843);
> > + if (status)
> > + goto fail0;
> > +
> > + status = hmc5843_input_init(hmc5843);
> > + if (status)
> > + goto fail0;
> > +
> > + status = sysfs_create_group(&client->dev.kobj, &hmc5843_attr_group);
> > + if (status) {
> > + dev_dbg(&client->dev, "could not create sysfs files\n");
> > + goto fail1;
> > + }
> > + return 0;
> > +fail1:
> > + input_unregister_polled_device(hmc5843->ipdev);
> > +fail0:
> > + kfree(hmc5843);
> > + return status;
> > +}
> > +
> > +static int __devexit hmc5843_i2c_remove(struct i2c_client *client)
> > +{
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > +
> > + sysfs_remove_group(&client->dev.kobj, &hmc5843_attr_group);
> > + input_unregister_polled_device(hmc5843->ipdev);
> > + i2c_set_clientdata(client, NULL);
> > + kfree(hmc5843);
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM
> > +static int hmc5843_suspend(struct device *dev)
> > +{
> > + struct i2c_client *client = dev_get_drvdata(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > +
> > + /* save our current mode for resume and put device to sleep */
> > + int m = hmc5843->mode;
> Not entirely certain but perhaps need a lock here to prevent user
> changing mode just as suspend occurs? I haven't worked out what exactly
> happens in that case though.
> > + hmc5843->mode = HMC5843_MODE_SLEEP;
> > + hmc5843_write_register(hmc5843, HMC5843_MODE_REG);
> > + hmc5843->mode = m;
> > + return 0;
> > +}
> > +
> > +static int hmc5843_resume(struct device *dev)
> > +{
> > + struct i2c_client *client = dev_get_drvdata(dev);
> > + struct hmc5843 *hmc5843 = i2c_get_clientdata(client);
> > +
> > + /* restore whatever mode we were in before suspending */
> > + hmc5843_write_register(hmc5843, HMC5843_MODE_REG);
> > + return 0;
> > +}
> > +
> > +static struct dev_pm_ops hmc5843_dev_pm_ops = {
> > + .suspend = hmc5843_suspend,
> > + .resume = hmc5843_resume,
> > +};
> > +
> > +#define HMC5843_DEV_PM_OPS (&hmc5843_dev_pm_ops)
> > +#else
> > +#define HMC5843_DEV_PM_OPS NULL
> > +#endif
> > +
> > +static const struct i2c_device_id hmc5843_id[] = {
> > + { "hmc5843", 0 },
> > + { },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, hmc5843_id);
> > +
> > +static struct i2c_driver hmc5843_i2c_driver = {
> > + .driver = {
> > + .name = "hmc5843",
> > + .owner = THIS_MODULE,
> > + .pm = HMC5843_DEV_PM_OPS,
> > + },
> > + .probe = hmc5843_i2c_probe,
> > + .remove = __devexit_p(hmc5843_i2c_remove),
> > + .id_table = hmc5843_id,
> > +};
> > +
> > +static int __init hmc5843_init(void)
> > +{
> > + return i2c_add_driver(&hmc5843_i2c_driver);
> > +}
> > +module_init(hmc5843_init);
> > +
> > +static void __exit hmc5843_exit(void)
> > +{
> > + i2c_del_driver(&hmc5843_i2c_driver);
> > +}
> > +module_exit(hmc5843_exit);
> > +
> > +MODULE_AUTHOR("Steven King <sfking@fdwdc.com>");
> > +MODULE_DESCRIPTION("Honeywell HMC5843 3-Axis Magnetometer driver");
> > +MODULE_LICENSE("GPL");
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-input"
> in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/



\
 
 \ /
  Last update: 2010-06-25 15:35    [W:0.040 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site