lkml.org 
[lkml]   [2010]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectNew P2020-based board (mpc85xx) gets "Processor 1 is stuck" on 2.6.34, not on 2.6.32
Hello,

I'm working on a new board port for a P2020-based board, and I'm
having problems with my second core not starting up on 2.6.34, even
though it starts up fine on 2.6.32.

In adding various debugs to mpc85xx_kick_cpu(), it looks like the
virtual address is detected as 0x7ffff280 on both, and it seems to
ioremap it to the same address. Furthermore, both of them get the
"ack" from the other CPU almost immediately (within 1ms).
Unfortunately, after that the second core fails to rendezvous
elsewhere in the SMP code and as a result I get "Processor 1 is
stuck".

Unfortunately I've had no luck looking through "git log
v2.6.32..v2.6.34 -- arch/powerpc/" by hand, and there are enough
mechanical merge conflicts with my patchset to make "bisection" very
painful (IE: git bisect, git cherry-pick, test, git reset --hard
HEAD^, repeat)

Any additional suggestions on where to look would be much appreciated.

Cheers,
Kyle Moffett


\
 
 \ /
  Last update: 2010-06-25 05:35    [W:0.038 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site