lkml.org 
[lkml]   [2010]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 4/5] isdn/gigaset: encode HLC and BC together
From
Date
Adapt to buggy device firmware which accepts setting HLC only in the
same command line as BC, by encoding HLC and BC in a single command
if both are specified, and rejecting HLC without BC.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
---
drivers/isdn/gigaset/capi.c | 83 +++++++++++++++++++++++---------------
drivers/isdn/gigaset/ev-layer.c | 4 +-
drivers/isdn/gigaset/gigaset.h | 5 +-
3 files changed, 53 insertions(+), 39 deletions(-)

diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index e685123..7d9549e 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -1166,7 +1166,7 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
char **commands;
char *s;
u8 *pp;
- int i, l;
+ int i, l, lbc, lhlc;
u16 info;

/* decode message */
@@ -1293,43 +1293,60 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
goto error;
}

- /* check/encode parameter: BC */
- if (cmsg->BC && cmsg->BC[0]) {
- /* explicit BC overrides CIP */
- l = 2*cmsg->BC[0] + 7;
+ /*
+ * check/encode parameters: BC & HLC
+ * must be encoded together as device doesn't accept HLC separately
+ * explicit parameters override values derived from CIP
+ */
+
+ /* determine lengths */
+ if (cmsg->BC && cmsg->BC[0]) /* BC specified explicitly */
+ lbc = 2*cmsg->BC[0];
+ else if (cip2bchlc[cmsg->CIPValue].bc) /* BC derived from CIP */
+ lbc = strlen(cip2bchlc[cmsg->CIPValue].bc);
+ else /* no BC */
+ lbc = 0;
+ if (cmsg->HLC && cmsg->HLC[0]) /* HLC specified explicitly */
+ lhlc = 2*cmsg->HLC[0];
+ else if (cip2bchlc[cmsg->CIPValue].hlc) /* HLC derived from CIP */
+ lhlc = strlen(cip2bchlc[cmsg->CIPValue].hlc);
+ else /* no HLC */
+ lhlc = 0;
+
+ if (lbc) {
+ /* have BC: allocate and assemble command string */
+ l = lbc + 7; /* "^SBC=" + value + "\r" + null byte */
+ if (lhlc)
+ l += lhlc + 7; /* ";^SHLC=" + value */
commands[AT_BC] = kmalloc(l, GFP_KERNEL);
if (!commands[AT_BC])
goto oom;
strcpy(commands[AT_BC], "^SBC=");
- decode_ie(cmsg->BC, commands[AT_BC]+5);
+ if (cmsg->BC && cmsg->BC[0]) /* BC specified explicitly */
+ decode_ie(cmsg->BC, commands[AT_BC] + 5);
+ else /* BC derived from CIP */
+ strcpy(commands[AT_BC] + 5,
+ cip2bchlc[cmsg->CIPValue].bc);
+ if (lhlc) {
+ strcpy(commands[AT_BC] + lbc + 5, ";^SHLC=");
+ if (cmsg->HLC && cmsg->HLC[0])
+ /* HLC specified explicitly */
+ decode_ie(cmsg->HLC,
+ commands[AT_BC] + lbc + 12);
+ else /* HLC derived from CIP */
+ strcpy(commands[AT_BC] + lbc + 12,
+ cip2bchlc[cmsg->CIPValue].hlc);
+ }
strcpy(commands[AT_BC] + l - 2, "\r");
- } else if (cip2bchlc[cmsg->CIPValue].bc) {
- l = strlen(cip2bchlc[cmsg->CIPValue].bc) + 7;
- commands[AT_BC] = kmalloc(l, GFP_KERNEL);
- if (!commands[AT_BC])
- goto oom;
- snprintf(commands[AT_BC], l, "^SBC=%s\r",
- cip2bchlc[cmsg->CIPValue].bc);
- }
-
- /* check/encode parameter: HLC */
- if (cmsg->HLC && cmsg->HLC[0]) {
- /* explicit HLC overrides CIP */
- l = 2*cmsg->HLC[0] + 7;
- commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
- if (!commands[AT_HLC])
- goto oom;
- strcpy(commands[AT_HLC], "^SHLC=");
- decode_ie(cmsg->HLC, commands[AT_HLC]+5);
- strcpy(commands[AT_HLC] + l - 2, "\r");
- } else if (cip2bchlc[cmsg->CIPValue].hlc) {
- l = strlen(cip2bchlc[cmsg->CIPValue].hlc) + 7;
- commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
- if (!commands[AT_HLC])
- goto oom;
- snprintf(commands[AT_HLC], l, "^SHLC=%s\r",
- cip2bchlc[cmsg->CIPValue].hlc);
- }
+ } else {
+ /* no BC */
+ if (lhlc) {
+ dev_notice(cs->dev, "%s: cannot set HLC without BC\n",
+ "CONNECT_REQ");
+ info = CapiIllMessageParmCoding; /* ? */
+ goto error;
+ }
+ }

/* check/encode parameter: B Protocol */
if (cmsg->BProtocol == CAPI_DEFAULT) {
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index 206c380..ceaef9a 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -282,9 +282,7 @@ struct reply_t gigaset_tab_cid[] =
/* dial */
{EV_DIAL, -1, -1, -1, -1, -1, {ACT_DIAL} },
{RSP_INIT, 0, 0, SEQ_DIAL, 601, 5, {ACT_CMD+AT_BC} },
-{RSP_OK, 601, 601, -1, 602, 5, {ACT_CMD+AT_HLC} },
-{RSP_NULL, 602, 602, -1, 603, 5, {ACT_CMD+AT_PROTO} },
-{RSP_OK, 602, 602, -1, 603, 5, {ACT_CMD+AT_PROTO} },
+{RSP_OK, 601, 601, -1, 603, 5, {ACT_CMD+AT_PROTO} },
{RSP_OK, 603, 603, -1, 604, 5, {ACT_CMD+AT_TYPE} },
{RSP_OK, 604, 604, -1, 605, 5, {ACT_CMD+AT_MSN} },
{RSP_NULL, 605, 605, -1, 606, 5, {ACT_CMD+AT_CLIP} },
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index f77ec54..c4e6c26 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -186,10 +186,9 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
#define AT_BC 3
#define AT_PROTO 4
#define AT_TYPE 5
-#define AT_HLC 6
-#define AT_CLIP 7
+#define AT_CLIP 6
/* total number */
-#define AT_NUM 8
+#define AT_NUM 7

/* variables in struct at_state_t */
#define VAR_ZSAU 0
--
1.6.5.3.298.g39add


\
 
 \ /
  Last update: 2010-06-22 02:07    [W:0.423 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site