lkml.org 
[lkml]   [2010]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [URGENT] Re: bit errors on spitz + voipac
On Thu, Jun 3, 2010 at 8:01 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Dne Po 8. března 2010 13:16:35 Cyril Hrubis napsal(a):
>> Hi!
>>
>> > - And I see display noise while CF Wi-Fi card is active.
>>
>> Forgotten about this one. See for yourself, notice short black vertical
>> lines flashing randomly.
>>
>> http://atrey.karlin.mff.cuni.cz/~metan/outgoing/zaurus_sickness.mpg
>
> This is not only case of spitz. I've seen LCD image falling apart on pxafb on
> Voipac PXA270 board. The image was like "torn in half and part of it was moved
> to right, the hole between staying white".
>
> This happened exactly when I started doing a DMA transfer from a harddrive
> attached through pata_pxa. It's perfectly replicable. If I disabled DMA and let
> it run only in PIO, the image was fine.
>
> I assume the corruption Pavel was seeing is related. My guess is the problems
> are caused when DMA between the CPU and a companion chip happens. I dunno if the
> DMA controller doesn't have enough power to supply LCD and the companion chip
> with data, but that's one of my guesses.
>
> btw. Adjusting the DMA descriptor length in pata_pxa didn't help.
>

If there is a FIFO attached, may need the FIFO status when the error happens.
And a dump of the DMA registers would also be helpful.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-06-03 04:33    [W:0.103 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site