lkml.org 
[lkml]   [2010]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] hwmon: (coretemp) Get TjMax value from MSR
From
Date
On Wed, 2010-06-02 at 19:34 +0300, Maxim Levitsky wrote: 
> On Mon, 2010-05-31 at 09:39 +0800, Huaxu Wan wrote:
> > On 08:39 Sat 29 May, Maxim Levitsky wrote:
> > > On Fri, 2010-05-07 at 17:59 +0800, Huaxu Wan wrote:
> > > > The MSR IA32_TEMPERATURE_TARGET contains the TjMax value in the newer
> > > > processers.
> > >
> > > I know that TjMax on my system is 85, and now coretemp reports wrong
> > > temperatures.
> > > First of all BIOS using stupid tricks actualy reports CPU temperature
> > > through ACPI, and assuming it was correct TjMax is 85.
> > > It also shuts down the system if I 'lie' to it that cpu temperature is
> > > 85C.
> >
> > From the list at [1], the TjMax(Tjunction) of T5450 is 100C. Does anyone
> > here can make a double check?
> >
> > [1] http://ark.intel.com/Product.aspx?id=30787&processor=T5450&spec-codes=SLA4F
>
> This is very interesting.
>
> With TjMax 85C, the CPUs idle temperature is reported at around 45~50C
> GPU temperature that is around 60C
>
> BIOS also reports 45~50C.
>
> BIOS hooks an SMI to CPU thermal report, and stores the temperature it
> read in ram, then ACPI code reads it, reports and passes to the EC
> (embedded controller).
>
> If I write myself 85 to embedded controller, systems shuts down.
> (values less that 85, eg 84 don't shut system).


Another clue is that right after resume from ram, after long delay
(~hour) the displayed temperature with TjMax 85 is 33C. Since room
temperature here is around 27C, this seems more plausible that
33 + 15 = 48C


Best regards,
Maxim Levitsky



\
 
 \ /
  Last update: 2010-06-02 22:13    [W:0.068 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site