[lkml]   [2010]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3} hwmon: Driver for SMM665 Six-Channel Active DC Output Controller/Monitor
This driver adds support for the hardware monitoring features of the Summit
Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor.

- Some of the command register enum values are currently unused.
Keep or remove ?
- Critical voltage values are not supported by the current sysfs API,
though available from the chip. Would it make sense to report those values,
e.g. as inX_min_crit and inX_max_crit ?
Note: This also applies to PMBus chips, so the question will come up again.
- It would be nice to be able to support other variants of this chip,
but I have no means to test it. Some test coverage by others would be helpful.

 \ /
  Last update: 2010-06-18 18:11    [W:0.044 / U:0.928 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site