lkml.org 
[lkml]   [2010]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCHv6 07/11] USB: gadget: g_ether: updated INF file
Updated the INF file for the g_ether gadegt.  It should work with most
recent Windows systems now.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
Documentation/usb/linux.inf | 228 +++++++++----------------------------------
1 files changed, 47 insertions(+), 181 deletions(-)
diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf
index 8e7e793..b9e538c 100644
--- a/Documentation/usb/linux.inf
+++ b/Documentation/usb/linux.inf
@@ -1,200 +1,66 @@
-; MS-Windows driver config matching some basic modes of the
-; Linux-USB Ethernet/RNDIS gadget firmware:
-;
-; - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
-; cable modem profile, and supports most non-Microsoft USB hosts
-;
-; - RNDIS plus CDC Subset ... used by hardware that incapable of
-; full CDC Ethernet support.
-;
-; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
-; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
-; http://www.microsoft.com/whdc/hwdev/resources/HWservices/rndis.mspx
-
+; Based on template INF file found at
+; <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
+; which was:
+; Copyright (c) Microsoft Corporation
+; and released under the MLPL as found at:
+; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.

[Version]
-Signature = "$CHICAGO$"
+Signature = "$Windows NT$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Linux%
-Compatible = 1
-MillenniumPreferred = .ME
-DriverVer = 03/30/2004,0.0.0.0
-; catalog file would be used by WHQL
-;CatalogFile = Linux.cat
+DriverVer = 06/21/2006,6.0.6000.16384

[Manufacturer]
-%Linux% = LinuxDevices,NT.5.1
+%Linux% = LinuxDevices,NTx86,NTamd64,NTia64
+
+; Decoration for x86 architecture
+[LinuxDevices.NTx86]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2

-[LinuxDevices]
-; NetChip IDs, used by both firmware modes
-%LinuxDevice% = RNDIS, USB\VID_0525&PID_a4a2
+; Decoration for x64 architecture
+[LinuxDevices.NTamd64]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2

-[LinuxDevices.NT.5.1]
-%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+; Decoration for ia64 architecture
+[LinuxDevices.NTia64]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2

+;@@@ This is the common setting for setup
[ControlFlags]
ExcludeFromSelect=*

-; Windows 98, Windows 98 Second Edition specific sections --------
-
-[RNDIS]
-DeviceID = usb8023
-MaxInstance = 512
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_98, RNDIS_AddReg_Common
-
-[RNDIS_AddReg_98]
-HKR, , DevLoader, 0, *ndis
-HKR, , DeviceVxDs, 0, usb8023.sys
-HKR, NDIS, LogDriverName, 0, "usb8023"
-HKR, NDIS, MajorNdisVersion, 1, 5
-HKR, NDIS, MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_98"
-HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_98"
-HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_98"
-HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_98]
-CopyFiles=RNDIS_CopyFiles_98
-
-[RNDIS_CopyFiles_98]
-usb8023.sys, usb8023w.sys, , 0
-rndismp.sys, rndismpw.sys, , 0
-
-; Windows Millennium Edition specific sections --------------------
-
-[RNDIS.ME]
-DeviceID = usb8023
-MaxInstance = 512
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_ME, RNDIS_AddReg_Common
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-
-[RNDIS_AddReg_ME]
-HKR, , DevLoader, 0, *ndis
-HKR, , DeviceVxDs, 0, usb8023.sys
-HKR, NDIS, LogDriverName, 0, "usb8023"
-HKR, NDIS, MajorNdisVersion, 1, 5
-HKR, NDIS, MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_ME"
-HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_ME"
-HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_ME"
-HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_ME]
-CopyFiles=RNDIS_CopyFiles_ME
-
-[RNDIS_CopyFiles_ME]
-usb8023.sys, usb8023m.sys, , 0
-rndismp.sys, rndismpm.sys, , 0
-
-; Windows 2000 specific sections ---------------------------------
-
-[RNDIS.NT]
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-CopyFiles = RNDIS_CopyFiles_NT
-
-[RNDIS.NT.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
-
-[RNDIS_CopyFiles_NT]
-; no rename of files on Windows 2000, use the 'k' names as is
-usb8023k.sys, , , 0
-rndismpk.sys, , , 0
-
-[RNDIS_ServiceInst_NT]
-DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023k.sys
-LoadOrderGroup = NDIS
-AddReg = RNDIS_WMI_AddReg_NT
-
-[RNDIS_WMI_AddReg_NT]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
-
-; Windows XP specific sections -----------------------------------
-
+; DDInstall section
+; References the in-build Netrndis.inf
[RNDIS.NT.5.1]
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-; no copyfiles - the files are already in place
-
+Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType = 15
+; NEVER REMOVE THE FOLLOWING REFERENCE FOR NETRNDIS.INF
+include = netrndis.inf
+needs = Usb_Rndis.ndi
+AddReg = Rndis_AddReg_Vista
+
+; DDInstal.Services section
[RNDIS.NT.5.1.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
-
-[RNDIS_ServiceInst_51]
-DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023.sys
-LoadOrderGroup = NDIS
-AddReg = RNDIS_WMI_AddReg_51
-
-[RNDIS_WMI_AddReg_51]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
-
-; Windows 2000 and Windows XP common sections --------------------
-
-[RNDIS_AddReg_NT]
-HKR, Ndi, Service, 0, "USB_RNDIS"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-
-[RNDIS_EventLog]
-AddReg = RNDIS_EventLog_AddReg
-
-[RNDIS_EventLog_AddReg]
-HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
-HKR, , TypesSupported, 0x00010001, 7
-
-; Common Sections -------------------------------------------------
-
-[RNDIS_AddReg_Common]
-HKR, NDI\params\NetworkAddress, ParamDesc, 0, %NetworkAddress%
-HKR, NDI\params\NetworkAddress, type, 0, "edit"
-HKR, NDI\params\NetworkAddress, LimitText, 0, "12"
-HKR, NDI\params\NetworkAddress, UpperCase, 0, "1"
-HKR, NDI\params\NetworkAddress, default, 0, " "
-HKR, NDI\params\NetworkAddress, optional, 0, "1"
-
-[SourceDisksNames]
-1=%SourceDisk%,,1
-
-[SourceDisksFiles]
-usb8023m.sys=1
-rndismpm.sys=1
-usb8023w.sys=1
-rndismpw.sys=1
-usb8023k.sys=1
-rndismpk.sys=1
-
-[DestinationDirs]
-RNDIS_CopyFiles_98 = 10, system32/drivers
-RNDIS_CopyFiles_ME = 10, system32/drivers
-RNDIS_CopyFiles_NT = 12
+include = netrndis.inf
+needs = Usb_Rndis.ndi.Services
+
+; Optional registry settings. You can modify as needed.
+[RNDIS_AddReg_Vista]
+HKR, NDI\params\VistaProperty, ParamDesc, 0, %Vista_Property%
+HKR, NDI\params\VistaProperty, type, 0, "edit"
+HKR, NDI\params\VistaProperty, LimitText, 0, "12"
+HKR, NDI\params\VistaProperty, UpperCase, 0, "1"
+HKR, NDI\params\VistaProperty, default, 0, " "
+HKR, NDI\params\VistaProperty, optional, 0, "1"
+
+; No sys copyfiles - the sys files are already in-build
+; (part of the operating system).
+; We do not support XP SP1-, 2003 SP1-, ME, 9x.

[Strings]
-ServiceDisplayName = "USB Remote NDIS Network Device Driver"
-NetworkAddress = "Network Address"
Linux = "Linux Developer Community"
LinuxDevice = "Linux USB Ethernet/RNDIS Gadget"
-SourceDisk = "Ethernet/RNDIS Gadget Driver Install Disk"
-
+Vista_Property = "Optional Vista Property"
--
1.7.1


\
 
 \ /
  Last update: 2010-06-18 14:51    [from the cache]
©2003-2011 Jasper Spaans