lkml.org 
[lkml]   [2010]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6.35-rc3 BUG: unable to handle kernel paging request (ahci_stop_engine)
Date
On Tuesday, June 15, 2010 04:24:38 pm Brian Bloniarz wrote:
> On 06/15/2010 03:11 PM, Brian Bloniarz wrote:
> > I'm seeing the following BUG booting a Dell Precision T3500
> > with 2.6.35-rc3 -- does this ring any bells for anyone?
> >
> > Looks like -rc1 has the same behavior, I haven't gotten any
> > farther than that yet.
>
> 2.6.34 does not boot for me on this machine either, it times
> out waiting for the boot device. However, it doesn't BUG.
> I'm wondering if there are two issues, some issue which
> showed up pre 2.6.34 causing this:
>
> [ 5.854464] ahci 0000:00:1f.2: controller reset failed (0xffffffff)
>
> and then something post-2.6.34 which triggers the BUG.

Yes, it sounds like this may be two separate issues, but both
could be regressions, and we definitely want to resolve them.
Thanks for giving me a heads-up!

I assume there is *some* older kernel that works. If so, can
you open a report at http://bugzilla.kernel.org that mentions
the working older revision and the broken new one, and attach
the dmesg logs for both?

> Googling for "controller reset failed" gives this:
> https://bugzilla.kernel.org/show_bug.cgi?id=15744
> on a similar machine, but that was fixed before 2.6.34.
> Bjorn, could you tell me if this boot log shows anything
> similar to the behavior you describe in that bug link?

The symptoms are similar to 15744, but I think you're seeing something
a bit different. Here's what you see:

ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfc000000]
pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff]
pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff]

The BIOS left the device set to an address that isn't within any of
the host bridge windows, so we moved it:

pci 0000:00:1f.2: BAR 5: assigned [mem 0xbff00000-0xbff007ff]
pci 0000:00:1f.2: BAR 5: set to [mem 0xbff00000-0xbff007ff] (PCI address [0xbff00000-0xbff007ff]

The new address (0xbff00000) is inside one of the windows and looks
reasonable. If you booted Windows on this system, I think it would
also move the device, though it would probably pick a different
place to put it.

ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: controller reset failed (0xffffffff)

The device seems to be responding there (we read the IRQ information,
for example), so I don't see a problem from the PCI side yet, but
something is still wrong.

It's conceivable that booting with "pci=nocrs" would make a difference.
If so, please collect the dmesg log so I can see where we went wrong.

The BUG:

ahci 0000:00:1f.2: failed to stop engine (-5)
BUG: unable to handle kernel paging request at ffffc90012621018
IP: [<ffffffffa002c77c>] ahci_stop_engine+0x2c/0x70 [libahci]

looks very strange to me. ahci_stop_engine() does a read from the
device, then a write, and it looks like the page fault was on the
write to the same address we just read. I don't know enough about
x86 to go any farther yet.

Bjorn

> > [ 0.000000] Initializing cgroup subsys cpuset
> > [ 0.000000] Initializing cgroup subsys cpu
> > [ 0.000000] Linux version 2.6.35-020635rc3-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #020635rc3 SMP Sat Jun 12 09:09:12 UTC 2010
> > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-020635rc3-generic root=UUID=45f3fa71-d7b2-4af5-9bfe-0702e8a64758 ro crashkernel=384M-2G:64M,2G-:128M console=ttyS0,115200
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096800 (usable)
> > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfdf9c00 (usable)
> > [ 0.000000] BIOS-e820: 00000000bfdf9c00 - 00000000bfe4bc00 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 00000000bfe4bc00 - 00000000bfe4dc00 (ACPI data)
> > [ 0.000000] BIOS-e820: 00000000bfe4dc00 - 00000000c0000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fc000000 - 00000000fd000000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fe000000 - 00000000fed00400 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
> > [ 0.000000] NX (Execute Disable) protection: active
> > [ 0.000000] DMI 2.5 present.
> > [ 0.000000] No AGP bridge found
> > [ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
> > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> > [ 0.000000] last_pfn = 0xbfdf9 max_arch_pfn = 0x400000000
> > [ 0.000000] Scanning 1 areas for low memory corruption
> > [ 0.000000] modified physical RAM map:
> > [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
> > [ 0.000000] modified: 0000000000010000 - 0000000000096800 (usable)
> > [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
> > [ 0.000000] modified: 0000000000100000 - 00000000bfdf9c00 (usable)
> > [ 0.000000] modified: 00000000bfdf9c00 - 00000000bfe4bc00 (ACPI NVS)
> > [ 0.000000] modified: 00000000bfe4bc00 - 00000000bfe4dc00 (ACPI data)
> > [ 0.000000] modified: 00000000bfe4dc00 - 00000000c0000000 (reserved)
> > [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
> > [ 0.000000] modified: 00000000fc000000 - 00000000fd000000 (reserved)
> > [ 0.000000] modified: 00000000fe000000 - 00000000fed00400 (reserved)
> > [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
> > [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
> > [ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable)
> > [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfdf9000
> > [ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
> > [ 0.000000] RAMDISK: 3772c000 - 37ff0000
> > [ 0.000000] Reserving 128MB of memory at 32MB for crashkernel (System RAM: 13312MB)
> > [ 0.000000] ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
> > [ 0.000000] ACPI: XSDT 00000000000fcd96 0007C (v01 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: FACP 00000000000fce86 000F4 (v03 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: DSDT 00000000ffe9825b 04A18 (v01 DELL dt_ex 00001000 INTL 20050624)
> > [ 0.000000] ACPI: FACS 00000000bfdf9c00 00040
> > [ 0.000000] ACPI: SSDT 00000000ffe9cd94 000AC (v01 DELL st_ex 00001000 INTL 20050624)
> > [ 0.000000] ACPI: APIC 00000000000fcf7a 0009E (v01 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: BOOT 00000000000fd018 00028 (v01 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: ASF! 00000000000fd040 00096 (v32 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: MCFG 00000000000fd0d6 0003E (v01 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: HPET 00000000000fd114 00038 (v01 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: TCPA 00000000000fd370 00032 (v01 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: DMAR 00000000000fd3a2 000C8 (v01 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: SLIC 00000000000fd14c 00176 (v01 DELL B10K 00000015 ASL 00000061)
> > [ 0.000000] ACPI: SSDT 00000000bfe4dc00 0185C (v01 INTEL PPM RCM 80000001 INTL 20061109)
> > [ 0.000000] No NUMA configuration found
> > [ 0.000000] Faking a node at 0000000000000000-0000000340000000
> > [ 0.000000] Initmem setup node 0 0000000000000000-0000000340000000
> > [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0x00000010 -> 0x00001000
> > [ 0.000000] DMA32 0x00001000 -> 0x00100000
> > [ 0.000000] Normal 0x00100000 -> 0x00340000
> > [ 0.000000] Movable zone start PFN for each node
> > [ 0.000000] early_node_map[3] active PFN ranges
> > [ 0.000000] 0: 0x00000010 -> 0x00000096
> > [ 0.000000] 0: 0x00000100 -> 0x000bfdf9
> > [ 0.000000] 0: 0x00100000 -> 0x00340000
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
> > [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> > [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> > [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
> > [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > [ 0.000000] Using ACPI (MADT) for SMP configuration information
> > [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> > [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
> > [ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000f0000
> > [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> > [ 0.000000] PM: Registered nosave memory: 00000000bfdf9000 - 00000000bfdfa000
> > [ 0.000000] PM: Registered nosave memory: 00000000bfdfa000 - 00000000bfe4b000
> > [ 0.000000] PM: Registered nosave memory: 00000000bfe4b000 - 00000000bfe4c000
> > [ 0.000000] PM: Registered nosave memory: 00000000bfe4c000 - 00000000bfe4d000
> > [ 0.000000] PM: Registered nosave memory: 00000000bfe4d000 - 00000000bfe4e000
> > [ 0.000000] PM: Registered nosave memory: 00000000bfe4e000 - 00000000c0000000
> > [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
> > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
> > [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fc000000
> > [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fd000000
> > [ 0.000000] PM: Registered nosave memory: 00000000fd000000 - 00000000fe000000
> > [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fed00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
> > [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
> > [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
> > [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
> > [ 0.000000] Booting paravirtualized kernel on bare hardware
> > [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
> > [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91392 r8192 d23296 u262144
> > [ 0.000000] pcpu-alloc: s91392 r8192 d23296 u262144 alloc=1*2097152
> > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3098495
> > [ 0.000000] Policy zone: Normal
> > [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-020635rc3-generic root=UUID=45f3fa71-d7b2-4af5-9bfe-0702e8a64758 ro crashkernel=384M-2G:64M,2G-:128M console=ttyS0,115200
> > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> > [ 0.000000] Checking aperture...
> > [ 0.000000] No AGP bridge found
> > [ 0.000000] Subtract (59 early reservations)
> > [ 0.000000] #1 [0001000000 - 0001d2b514] TEXT DATA BSS
> > [ 0.000000] #2 [003772c000 - 0037ff0000] RAMDISK
> > [ 0.000000] #3 [0000096800 - 0000100000] BIOS reserved
> > [ 0.000000] #4 [0001d2c000 - 0001d2c1a4] BRK
> > [ 0.000000] #5 [0000010000 - 0000012000] TRAMPOLINE
> > [ 0.000000] #6 [0000012000 - 0000016000] ACPI WAKEUP
> > [ 0.000000] #7 [0000016000 - 0000019000] PGTABLE
> > [ 0.000000] #8 [0000019000 - 0000022000] PGTABLE
> > [ 0.000000] #9 [0002000000 - 000a000000] CRASH KERNEL
> > [ 0.000000] #10 [0100000000 - 0100005000] NODE_DATA
> > [ 0.000000] #11 [0001d2c1c0 - 0001d2d1c0] BOOTMEM
> > [ 0.000000] #12 [0001d2b540 - 0001d2be40] BOOTMEM
> > [ 0.000000] #13 [0100005000 - 0100006000] BOOTMEM
> > [ 0.000000] #14 [0100006000 - 0100007000] BOOTMEM
> > [ 0.000000] #15 [0100200000 - 010aa00000] MEMMAP 0
> > [ 0.000000] #16 [0001d2be40 - 0001d2bfc0] BOOTMEM
> > [ 0.000000] #17 [0001d2d1c0 - 0001d451c0] BOOTMEM
> > [ 0.000000] #18 [0001d451c0 - 0001d5d1c0] BOOTMEM
> > [ 0.000000] #19 [0001d5e000 - 0001d5f000] BOOTMEM
> > [ 0.000000] #20 [0001d5d1c0 - 0001d5d201] BOOTMEM
> > [ 0.000000] #21 [0001d5d240 - 0001d5d2c6] BOOTMEM
> > [ 0.000000] #22 [0001d5d300 - 0001d5d5d8] BOOTMEM
> > [ 0.000000] #23 [0001d5d600 - 0001d5d668] BOOTMEM
> > [ 0.000000] #24 [0001d5d680 - 0001d5d6e8] BOOTMEM
> > [ 0.000000] #25 [0001d5d700 - 0001d5d768] BOOTMEM
> > [ 0.000000] #26 [0001d5d780 - 0001d5d7e8] BOOTMEM
> > [ 0.000000] #27 [0001d5d800 - 0001d5d868] BOOTMEM
> > [ 0.000000] #28 [0001d5d880 - 0001d5d8e8] BOOTMEM
> > [ 0.000000] #29 [0001d5d900 - 0001d5d968] BOOTMEM
> > [ 0.000000] #30 [0001d5d980 - 0001d5d9e8] BOOTMEM
> > [ 0.000000] #31 [0001d5da00 - 0001d5da68] BOOTMEM
> > [ 0.000000] #32 [0001d5da80 - 0001d5dae8] BOOTMEM
> > [ 0.000000] #33 [0001d5db00 - 0001d5db68] BOOTMEM
> > [ 0.000000] #34 [0001d5db80 - 0001d5dbe8] BOOTMEM
> > [ 0.000000] #35 [0001d2bfc0 - 0001d2bfe0] BOOTMEM
> > [ 0.000000] #36 [0001d5dc00 - 0001d5dc20] BOOTMEM
> > [ 0.000000] #37 [0001d5dc40 - 0001d5dcda] BOOTMEM
> > [ 0.000000] #38 [0001d5dd00 - 0001d5dd9a] BOOTMEM
> > [ 0.000000] #39 [0001e00000 - 0001e1e000] BOOTMEM
> > [ 0.000000] #40 [0001e40000 - 0001e5e000] BOOTMEM
> > [ 0.000000] #41 [0001e80000 - 0001e9e000] BOOTMEM
> > [ 0.000000] #42 [0001ec0000 - 0001ede000] BOOTMEM
> > [ 0.000000] #43 [0001f00000 - 0001f1e000] BOOTMEM
> > [ 0.000000] #44 [0001f40000 - 0001f5e000] BOOTMEM
> > [ 0.000000] #45 [0001f80000 - 0001f9e000] BOOTMEM
> > [ 0.000000] #46 [0001fc0000 - 0001fde000] BOOTMEM
> > [ 0.000000] #47 [0001d5ddc0 - 0001d5ddc8] BOOTMEM
> > [ 0.000000] #48 [0001d5de00 - 0001d5de08] BOOTMEM
> > [ 0.000000] #49 [0001d5de40 - 0001d5de60] BOOTMEM
> > [ 0.000000] #50 [0001d5de80 - 0001d5dec0] BOOTMEM
> > [ 0.000000] #51 [0001d5dec0 - 0001d5dfe0] BOOTMEM
> > [ 0.000000] #52 [0001d61000 - 0001d61048] BOOTMEM
> > [ 0.000000] #53 [0001d61080 - 0001d610c8] BOOTMEM
> > [ 0.000000] #54 [0001d61100 - 0001d69100] BOOTMEM
> > [ 0.000000] #55 [000a000000 - 000e000000] BOOTMEM
> > [ 0.000000] #56 [0001d69100 - 0001d89100] BOOTMEM
> > [ 0.000000] #57 [0001d89100 - 0001dc9100] BOOTMEM
> > [ 0.000000] #58 [0000023800 - 000002b800] BOOTMEM
> > [ 0.000000] Memory: 12187524k/13631488k available (5620k kernel code, 1051140k absent, 392824k reserved, 5501k data, 968k init)
> > [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> > [ 0.000000] Hierarchical RCU implementation.
> > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> > [ 0.000000] RCU-based detection of stalled CPUs is disabled.
> > [ 0.000000] Verbose stalled-CPUs detection is disabled.
> > [ 0.000000] NR_IRQS:4352 nr_irqs:1152
> > [ 0.000000] Console: colour VGA+ 80x25
> > [ 0.000000] console [ttyS0] enabled
> > [ 0.000000] allocated 125829120 bytes of page_cgroup
> > [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> > [ 0.000000] Fast TSC calibration using PIT
> > [ 0.010000] Detected 2666.492 MHz processor.
> > [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.98 BogoMIPS (lpj=26664920)
> > [ 0.010684] pid_max: default: 32768 minimum: 301
> > [ 0.015297] Security Framework initialized
> > [ 0.019376] SELinux: Disabled at boot.
> > [ 0.024338] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> > [ 0.034619] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> > [ 0.043003] Mount-cache hash table entries: 256
> > [ 0.047600] Initializing cgroup subsys ns
> > [ 0.051607] Initializing cgroup subsys cpuacct
> > [ 0.056032] Initializing cgroup subsys memory
> > [ 0.060372] Initializing cgroup subsys devices
> > [ 0.064803] Initializing cgroup subsys freezer
> > [ 0.069227] Initializing cgroup subsys net_cls
> > [ 0.073671] CPU: Physical Processor ID: 0
> > [ 0.077661] CPU: Processor Core ID: 0
> > [ 0.081316] mce: CPU supports 9 MCE banks
> > [ 0.085313] CPU0: Thermal monitoring enabled (TM1)
> > [ 0.090088] using mwait in idle threads.
> > [ 0.093999] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
> > [ 0.101139] ... version: 3
> > [ 0.105129] ... bit width: 48
> > [ 0.109206] ... generic registers: 4
> > [ 0.113204] ... value mask: 0000ffffffffffff
> > [ 0.118492] ... max period: 000000007fffffff
> > [ 0.123788] ... fixed-purpose events: 3
> > [ 0.127779] ... event mask: 000000070000000f
> > [ 0.134803] ACPI: Core revision 20100428
> > [ 0.276702] ftrace: converting mcount calls to 0f 1f 44 00 00
> > [ 0.282435] ftrace: allocating 26354 entries in 104 pages
> > [ 0.295108] Setting APIC routing to flat
> > [ 0.299474] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> > [ 0.405460] CPU0: Intel(R) Xeon(R) CPU W3520 @ 2.67GHz stepping 05
> > [ 0.530592] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
> > [ 1.790557] Brought up 8 CPUs
> > [ 1.793513] Total of 8 processors activated (42666.87 BogoMIPS).
> > [ 1.803682] devtmpfs: initialized
> > [ 1.807741] regulator: core version 0.5
> > [ 1.811585] Time: 18:22:34 Date: 06/15/10
> > [ 1.815689] NET: Registered protocol family 16
> > [ 1.820186] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> > [ 1.827731] ACPI: bus type pci registered
> > [ 1.831763] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> > [ 1.841038] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> > [ 1.863626] PCI: Using configuration type 1 for base access
> > [ 1.869721] bio: create slab <bio-0> at 0
> > [ 1.914658] ACPI: BIOS _OSI(Linux) query ignored
> > [ 1.938782] ACPI: Interpreter enabled
> > [ 1.942432] ACPI: (supports S0 S1 S3 S4 S5)
> > [ 1.946665] ACPI: Using IOAPIC for interrupt routing
> > [ 2.024783] ACPI Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0x7F (20100428/tbutils-314)
> > [ 2.034497] ACPI: No dock devices found.
> > [ 2.038405] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> > [ 2.054811] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> > [ 2.075566] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
> > [ 2.082159] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
> > [ 2.088751] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
> > [ 2.096035] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
> > [ 2.103320] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
> > [ 2.110604] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xdfffffff]
> > [ 2.117885] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfc000000]
> > [ 2.125167] pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff]
> > [ 2.132451] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
> > [ 2.139733] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
> > [ 2.148209] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
> > [ 2.156101] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
> > [ 2.163212] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
> > [ 2.170758] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
> > [ 2.178301] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0900 (mask 003f)
> > [ 2.186030] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> > [ 2.191406] pci 0000:00:03.0: PCI bridge to [bus 02-02]
> > [ 2.196652] pci 0000:00:07.0: PCI bridge to [bus 03-03]
> > [ 2.201902] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
> > [ 2.207333] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
> > [ 2.212606] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
> > [ 3.173750] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
> > [ 3.181628] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
> > [ 3.189498] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
> > [ 3.197357] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
> > [ 3.206378] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
> > [ 3.214243] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
> > [ 3.223267] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
> > [ 3.231135] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
> > [ 3.238410] HEST: Table is not found!
> > [ 3.242109] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
> > [ 3.250172] vgaarb: loaded
> > [ 3.252952] SCSI subsystem initialized
> > [ 3.256820] usbcore: registered new interface driver usbfs
> > [ 3.262293] usbcore: registered new interface driver hub
> > [ 3.267601] usbcore: registered new device driver usb
> > [ 3.272785] ACPI: WMI: Mapper loaded
> > [ 3.276346] PCI: Using ACPI for IRQ routing
> > [ 3.280547] pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff]
> > [ 3.288742] Expanded resource reserved due to conflict with PCI Bus 0000:00
> > [ 3.295681] Expanded resource reserved due to conflict with PCI Bus 0000:00
> > [ 3.302681] NetLabel: Initializing
> > [ 3.306069] NetLabel: domain hash size = 128
> > [ 3.310407] NetLabel: protocols = UNLABELED CIPSOv4
> > [ 3.315363] NetLabel: unlabeled traffic allowed by default
> > [ 3.320937] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> > [ 3.327962] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> > [ 3.333138] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> > [ 3.400597] Switching to clocksource tsc
> > [ 3.410213] pnp: PnP ACPI init
> > [ 3.413263] ACPI: bus type pnp registered
> > [ 3.427206] pnp 00:01: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
> > [ 3.437350] pnp 00:01: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
> > [ 3.478775] pnp: PnP ACPI: found 9 devices
> > [ 3.482856] ACPI: ACPI bus type pnp unregistered
> > [ 3.487463] system 00:01: [io 0x0c00-0x0c7f] has been reserved
> > [ 3.498027] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
> > [ 3.504881] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
> > [ 3.512683] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
> > [ 3.518841] pci 0000:00:1f.2: BAR 5: assigned [mem 0xbff00000-0xbff007ff]
> > [ 3.525608] pci 0000:00:1f.2: BAR 5: set to [mem 0xbff00000-0xbff007ff] (PCI address [0xbff00000-0xbff007ff]
> > [ 3.535403] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> > [ 3.540607] pci 0000:00:01.0: bridge window [io disabled]
> > [ 3.546250] pci 0000:00:01.0: bridge window [mem 0xdbe00000-0xdbefffff]
> > [ 3.553013] pci 0000:00:01.0: bridge window [mem pref disabled]
> > [ 3.559089] pci 0000:00:03.0: PCI bridge to [bus 02-02]
> > [ 3.564295] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
> > [ 3.570369] pci 0000:00:03.0: bridge window [mem 0xdc000000-0xdfefffff]
> > [ 3.577135] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
> > [ 3.584854] pci 0000:00:07.0: PCI bridge to [bus 03-03]
> > [ 3.590059] pci 0000:00:07.0: bridge window [io disabled]
> > [ 3.595699] pci 0000:00:07.0: bridge window [mem 0xdbf00000-0xdbffffff]
> > [ 3.602462] pci 0000:00:07.0: bridge window [mem pref disabled]
> > [ 3.608536] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
> > [ 3.613741] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> > [ 3.619814] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
> > [ 3.626579] pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
> > [ 3.634297] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
> > [ 3.639505] pci 0000:00:1c.5: bridge window [io disabled]
> > [ 3.645145] pci 0000:00:1c.5: bridge window [mem 0xdbd00000-0xdbdfffff]
> > [ 3.651910] pci 0000:00:1c.5: bridge window [mem pref disabled]
> > [ 3.657984] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
> > [ 3.663188] pci 0000:00:1e.0: bridge window [io disabled]
> > [ 3.668829] pci 0000:00:1e.0: bridge window [mem disabled]
> > [ 3.674468] pci 0000:00:1e.0: bridge window [mem pref disabled]
> > [ 3.680553] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > [ 3.687238] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > [ 3.693920] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > [ 3.700605] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > [ 3.707295] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> > [ 3.714045] NET: Registered protocol family 2
> > [ 3.718680] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
> > [ 3.727075] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> > [ 3.735642] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> > [ 3.742449] TCP: Hash tables configured (established 524288 bind 65536)
> > [ 3.749043] TCP reno registered
> > [ 3.752188] UDP hash table entries: 8192 (order: 6, 262144 bytes)
> > [ 3.758314] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
> > [ 3.764928] NET: Registered protocol family 1
> > [ 3.769485] Trying to unpack rootfs image as initramfs...
> > [ 3.926534] Freeing initrd memory: 8976k freed
> > [ 3.932157] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > [ 3.938586] Placing 64MB software IO TLB between ffff88000a000000 - ffff88000e000000
> > [ 3.946303] software IO TLB at phys 0xa000000 - 0xe000000
> > [ 3.951711] Simple Boot Flag at 0x7a set to 0x80
> > [ 3.956641] Scanning for low memory corruption every 60 seconds
> > [ 3.962644] audit: initializing netlink socket (disabled)
> > [ 3.968065] type=2000 audit(1276626154.790:1): initialized
> > [ 3.986773] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> > [ 3.994131] VFS: Disk quotas dquot_6.5.2
> > [ 3.998084] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> > [ 4.004904] fuse init (API version 7.14)
> > [ 4.008866] msgmni has been set to 23821
> > [ 4.012983] alg: No test for stdrng (krng)
> > [ 4.017099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> > [ 4.024469] io scheduler noop registered
> > [ 4.028377] io scheduler deadline registered
> > [ 4.032656] io scheduler cfq registered (default)
> > [ 4.037852] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
> > [ 4.045224] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
> > [ 4.054066] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
> > [ 4.060744] pcieport 0000:00:03.0: Requesting control of PCIe PME from ACPI BIOS
> > [ 4.068115] pcieport 0000:00:03.0: Failed to receive control of PCIe PME service: no _OSC support
> > [ 4.076959] pcie_pme: probe of 0000:00:03.0:pcie01 failed with error -13
> > [ 4.083635] pcieport 0000:00:07.0: Requesting control of PCIe PME from ACPI BIOS
> > [ 4.091006] pcieport 0000:00:07.0: Failed to receive control of PCIe PME service: no _OSC support
> > [ 4.099849] pcie_pme: probe of 0000:00:07.0:pcie01 failed with error -13
> > [ 4.106528] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
> > [ 4.113897] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
> > [ 4.122739] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
> > [ 4.129420] pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS
> > [ 4.136791] pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: no _OSC support
> > [ 4.145635] pcie_pme: probe of 0000:00:1c.5:pcie01 failed with error -13
> > [ 4.152321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> > [ 4.157907] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> > [ 4.164579] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> > [ 4.172901] ACPI: Power Button [VBTN]
> > [ 4.176582] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> > [ 4.183950] ACPI: Power Button [PWRF]
> > [ 4.249304] ERST: Table is not found!
> > [ 4.253949] Linux agpgart interface v0.103
> > [ 4.258045] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > [ 4.264380] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > [ 4.270595] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > [ 4.276811] brd: module loaded
> > [ 4.280151] loop: module loaded
> > [ 4.283555] Fixed MDIO Bus: probed
> > [ 4.286968] PPP generic driver version 2.4.2
> > [ 4.291241] tun: Universal TUN/TAP device driver, 1.6
> > [ 4.296277] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> > [ 4.302482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > [ 4.309010] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> > [ 4.316136] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> > [ 4.321362] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> > [ 4.328756] ehci_hcd 0000:00:1a.7: debug port 1
> > [ 4.337166] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdfffa000
> > [ 4.364462] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> > [ 4.370257] hub 1-0:1.0: USB hub found
> > [ 4.373993] hub 1-0:1.0: 6 ports detected
> > [ 4.378041] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> > [ 4.385164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> > [ 4.390394] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> > [ 4.397783] ehci_hcd 0000:00:1d.7: debug port 1
> > [ 4.406197] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
> > [ 4.434459] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> > [ 4.440244] hub 2-0:1.0: USB hub found
> > [ 4.443980] hub 2-0:1.0: 6 ports detected
> > [ 4.448020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > [ 4.454183] uhci_hcd: USB Universal Host Controller Interface driver
> > [ 4.460547] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > [ 4.467663] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> > [ 4.472894] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> > [ 4.480309] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
> > [ 4.486109] hub 3-0:1.0: USB hub found
> > [ 4.489845] hub 3-0:1.0: 2 ports detected
> > [ 4.493873] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> > [ 4.500990] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> > [ 4.506215] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> > [ 4.513609] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
> > [ 4.519410] hub 4-0:1.0: USB hub found
> > [ 4.523145] hub 4-0:1.0: 2 ports detected
> > [ 4.527175] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
> > [ 4.534289] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> > [ 4.539518] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> > [ 4.546924] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
> > [ 4.552720] hub 5-0:1.0: USB hub found
> > [ 4.556460] hub 5-0:1.0: 2 ports detected
> > [ 4.560492] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> > [ 4.567608] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> > [ 4.572837] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> > [ 4.580234] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
> > [ 4.586049] hub 6-0:1.0: USB hub found
> > [ 4.589784] hub 6-0:1.0: 2 ports detected
> > [ 4.593812] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> > [ 4.600931] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> > [ 4.606157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> > [ 4.613544] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
> > [ 4.619341] hub 7-0:1.0: USB hub found
> > [ 4.623076] hub 7-0:1.0: 2 ports detected
> > [ 4.627123] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> > [ 4.634237] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> > [ 4.639464] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
> > [ 4.646860] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
> > [ 4.652655] hub 8-0:1.0: USB hub found
> > [ 4.656403] hub 8-0:1.0: 2 ports detected
> > [ 4.660462] PNP: No PS/2 controller found. Probing ports directly.
> > [ 4.669259] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 4.674215] serio: i8042 AUX port at 0x60,0x64 irq 12
> > [ 4.679303] mice: PS/2 mouse device common for all mice
> > [ 4.684556] rtc_cmos 00:05: RTC can wake from S4
> > [ 4.689184] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> > [ 4.695285] usb 1-2: new high speed USB device using ehci_hcd and address 2
> > [ 4.695287] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
> > [ 4.695354] device-mapper: uevent: version 1.0.3
> > [ 4.695401] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
> > [ 4.695501] device-mapper: multipath: version 1.1.1 loaded
> > [ 4.695504] device-mapper: multipath round-robin: version 1.0.0 loaded
> > [ 4.695841] cpuidle: using governor ladder
> > [ 4.737650] cpuidle: using governor menu
> > [ 4.741769] TCP cubic registered
> > [ 4.745069] NET: Registered protocol family 10
> > [ 4.749781] lo: Disabled Privacy Extensions
> > [ 4.754108] NET: Registered protocol family 17
> > [ 4.758654] registered taskstats version 1
> > [ 4.762988] Magic number: 14:857:392
> > [ 4.766732] thermal cooling_device7: hash matches
> > [ 4.771508] rtc_cmos 00:05: setting system clock to 2010-06-15 18:22:37 UTC (1276626157)
> > [ 4.779577] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> >
> > [ 4.785561] EDD information not available.
> > [ 4.789767] Freeing unused kernel memory: 968k freed
> > [ 4.794827] Write protecting the kernel read-only data: 10240k
> > [ 4.801142] Freeing unused kernel memory: 504k freed
> > [ 4.806327] Freeing unused kernel memory: 1540k freed
> > Loading, please wait...
> > [ 4.824026] udev: starting version 151
> > Begin: Loading essential drivers... ...
> > Done.
> > Begin: Running /scripts/init-premount ...
> > Done.
> > Begin: Mounting root file system... ...
> > Begin: Running /scripts/local-top ...
> > Done.
> > [ 4.849124] tg3.c:v3.110 (April 9, 2010)
> > [ 4.849764] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
> > [ 4.859837] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> > [ 4.859863] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
> > [ 4.859936] ahci: SSS flag set, parallel bus scan disabled
> > [ 4.909578] hub 1-2:1.0: USB hub found
> > [ 4.913400] hub 1-2:1.0: 2 ports detected
> > [ 4.921485] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address 00:22:19:32:7e:30
> > [ 4.932063] tg3 0000:05:00.0: eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1])
> > [ 4.941164] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
> > [ 4.949053] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
> > [ 5.194682] usb 1-2.1: new high speed USB device using ehci_hcd and address 3
> > [ 5.305150] hub 1-2.1:1.0: USB hub found
> > [ 5.309185] hub 1-2.1:1.0: 4 ports detected
> > [ 5.394680] usb 1-2.2: new low speed USB device using ehci_hcd and address 4
> > [ 5.555467] usbcore: registered new interface driver hiddev
> > [ 5.561076] usbcore: registered new interface driver usbhid
> > [ 5.566637] usbhid: USB HID core driver
> > [ 5.578793] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/1-2.2:1.0/input/input2
> > [ 5.591072] microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.7-2.2/input0
> > [ 5.616209] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.2/1-2.2:1.1/input/input3
> > [ 5.628485] microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1a.7-2.2/input1
> > [ 5.635695] usb 1-2.1.1: new high speed USB device using ehci_hcd and address 5
> > [ 5.834119] Initializing USB Mass Storage driver...
> > [ 5.839208] scsi0 : usb-storage 1-2.1.1:1.0
> > [ 5.843526] usbcore: registered new interface driver usb-storage
> > [ 5.849516] USB Mass Storage support registered.
> > [ 5.854464] ahci 0000:00:1f.2: controller reset failed (0xffffffff)
> > [ 5.908956] usb 1-2.1.2: new low speed USB device using ehci_hcd and address 6
> > [ 6.031648] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/input/input4
> > [ 6.045732] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-2.1.2/input0
> > [ 6.354463] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 6.844828] scsi 0:0:0:0: Direct-Access Generic Flash HS-CF 5.39 PQ: 0 ANSI: 0
> > [ 6.854432] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 6.856055] scsi 0:0:0:1: Direct-Access Generic Flash HS-COMBO 5.39 PQ: 0 ANSI: 0
> > [ 6.857356] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > [ 6.857494] sd 0:0:0:1: Attached scsi generic sg1 type 0
> > [ 6.885248] sd 0:0:0:0: [sda] Attached SCSI removable disk
> > [ 6.894504] sd 0:0:0:1: [sdb] Attached SCSI removable disk
> > [ 7.374400] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 7.874362] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 8.374331] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 8.874299] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 9.374265] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 9.874236] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 10.374205] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 10.874173] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 11.374137] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 11.874101] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 12.374071] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 12.874039] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 13.374001] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 13.873977] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 14.373942] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 14.873908] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 15.373875] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 15.873842] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 16.373810] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 16.873775] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 17.373743] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 17.873711] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 18.373680] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 18.873642] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 19.373609] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 19.873581] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 20.373547] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 20.873514] ahci 0000:00:1f.2: failed to stop engine (-5)
> > [ 20.878896] BUG: unable to handle kernel paging request at ffffc90012621018
> > [ 20.885854] IP: [<ffffffffa002c77c>] ahci_stop_engine+0x2c/0x70 [libahci]
> > [ 20.892630] PGD 33fc0c067 PUD 33fc0d067 PMD 32e7a4067 PTE 0
> > [ 20.898224] Oops: 0000 [#1] SMP
> > [ 20.901459] last sysfs file: /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1:1.0/uevent
> > [ 20.911164] CPU 0
> > [ 20.912993] Modules linked in: usb_storage hid_microsoft usbhid hid ahci(+) tg3 libahci
> > [ 20.921241]
> > [ 20.922724] Pid: 286, comm: modprobe Not tainted 2.6.35-020635rc3-generic #020635rc3 0K095G/Precision WorkStation T3500
> > [ 20.933642] RIP: 0010:[<ffffffffa002c77c>] [<ffffffffa002c77c>] ahci_stop_engine+0x2c/0x70 [libahci]
> > [ 20.942840] RSP: 0018:ffff88032e53bb98 EFLAGS: 00010286
> > [ 20.948132] RAX: ffffc90012621000 RBX: ffff88032e188000 RCX: ffffc90012620000
> > [ 20.955240] RDX: 0000000000000f00 RSI: ffff88032e53bbe8 RDI: ffffc90012621018
> > [ 20.962348] RBP: ffff88032e53bb98 R08: ffffc90012621000 R09: 0000000000000000
> > [ 20.969455] R10: 0000000000000006 R11: 000000000000000a R12: ffff88032e53bbe8
> > [ 20.976563] R13: ffff8803323a3090 R14: ffff88032f5c7a18 R15: ffff88032f57f438
> > [ 20.983671] FS: 00007f570a121700(0000) GS:ffff880001e00000(0000) knlGS:0000000000000000
> > [ 20.991732] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> > [ 20.997457] CR2: ffffc90012621018 CR3: 000000032e549000 CR4: 00000000000006f0
> > [ 21.004567] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > [ 21.011677] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> > [ 21.018785] Process modprobe (pid: 286, threadinfo ffff88032e53a000, task ffff88032e0d96d0)
> > [ 21.027105] Stack:
> > [ 21.029108] ffff88032e53bbb8 ffffffffa002c8e1 ffffc90012621000 ffff88032f5c7a18
> > [ 21.036334] <0> ffff88032e53bc18 ffffffffa002ccd2 ffff88032e53bbd8 ffffc90012620000
> > [ 21.044016] <0> 0000001e00000282 00000000000000fa 0000000000000000 000000000000001f
> > [ 21.051883] Call Trace:
> > [ 21.054321] [<ffffffffa002c8e1>] ahci_deinit_port+0x21/0x50 [libahci]
> > [ 21.060826] [<ffffffffa002ccd2>] ahci_port_init+0x42/0xc0 [libahci]
> > [ 21.067158] [<ffffffffa002e920>] ahci_init_controller+0x70/0xa0 [libahci]
> > [ 21.074010] [<ffffffffa003a0e3>] ahci_pci_init_controller+0x53/0x60 [ahci]
> > [ 21.080947] [<ffffffffa003b197>] ahci_init_one+0x4c7/0x610 [ahci]
> > [ 21.087108] [<ffffffff812c8c97>] local_pci_probe+0x17/0x20
> > [ 21.092659] [<ffffffff812c8e59>] pci_call_probe+0x89/0xa0
> > [ 21.098124] [<ffffffff812ca304>] __pci_device_probe+0x54/0x60
> > [ 21.103936] [<ffffffff812ca34b>] pci_device_probe+0x3b/0x60
> > [ 21.109576] [<ffffffff813788c5>] really_probe+0xf5/0x190
> > [ 21.114954] [<ffffffff813789a5>] driver_probe_device+0x45/0x70
> > [ 21.120851] [<ffffffff81378cfd>] __driver_attach+0x8d/0x90
> > [ 21.126403] [<ffffffff81378c70>] ? __driver_attach+0x0/0x90
> > [ 21.132042] [<ffffffff8137796d>] bus_for_each_dev+0x5d/0x90
> > [ 21.137680] [<ffffffff813786a1>] driver_attach+0x21/0x30
> > [ 21.143058] [<ffffffff81378389>] bus_add_driver+0xd9/0x220
> > [ 21.148609] [<ffffffffa0042000>] ? ahci_init+0x0/0x20 [ahci]
> > [ 21.154334] [<ffffffffa0042000>] ? ahci_init+0x0/0x20 [ahci]
> > [ 21.160059] [<ffffffff81378f36>] driver_register+0x56/0xf0
> > [ 21.165612] [<ffffffffa0042000>] ? ahci_init+0x0/0x20 [ahci]
> > [ 21.171336] [<ffffffff812ca01f>] __pci_register_driver+0x5f/0xb0
> > [ 21.177407] [<ffffffffa0042000>] ? ahci_init+0x0/0x20 [ahci]
> > [ 21.183133] [<ffffffffa004201e>] ahci_init+0x1e/0x20 [ahci]
> > [ 21.188773] [<ffffffff81002046>] do_one_initcall+0x36/0x180
> > [ 21.194413] [<ffffffff8109b018>] sys_init_module+0x98/0x1e0
> > [ 21.200051] [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
> > [ 21.206035] Code: 48 89 e5 0f 1f 44 00 00 48 8b 87 50 28 00 00 8b 57 28 48 8b 40 20 c1 e2 07 89 d2 48 8b 00 48 05 00 01 00 00 48 01 d0 48 8d 78 18 <8b> 40 18 66 a9 01 80 75 0b 31 d2 c9 89 d0 c3 0f 1f 44 00 00 83
> > [ 21.225545] RIP [<ffffffffa002c77c>] ahci_stop_engine+0x2c/0x70 [libahci]
> > [ 21.232409] RSP <ffff88032e53bb98>
> > [ 21.235881] CR2: ffffc90012621018
> > [ 21.239181] ---[ end trace 44532c520da7bf63 ]---
> > udevd-work[182]: '/sbin/modprobe -b pci:v00008086d00002822sv00001028sd00000293bc01sc04i00' unexpected exit with status 0x0009
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2010-06-16 18:59    [W:0.118 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site