lkml.org 
[lkml]   [2010]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectQuestion on siig sata 3 controller
    From
    Does anyone know the status of the SIIG DP SATA 6Gb/s 2S1P PCIe (Part
    number: SC-SA0E12-S1)?

    I am encountering problems writing a large quantity through this
    controller and I want to see if there is a way to fix this. The pci ids
    do not appear to be referenced in the kernel.

    Are any of the siig sata controllers supported? Is there some issue with
    them supporting Linux that I am not aware of?

    Here is the lspci data:

    05:00.0 SATA controller: Device 1b4b:9123 (rev 11) (prog-if 01 [AHCI 1.0])
    Subsystem: Device 1b4b:9123
    Flags: bus master, fast devsel, latency 0, IRQ 30
    I/O ports at dc00 [size=8]
    I/O ports at d880 [size=4]
    I/O ports at d800 [size=8]
    I/O ports at d480 [size=4]
    I/O ports at d400 [size=16]
    Memory at f9fff800 (32-bit, non-prefetchable) [size=2K]
    Expansion ROM at f9fe0000 [disabled] [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ahci

    05:00.1 IDE interface: Device 1b4b:91a4 (rev 11) (prog-if 8f [Master SecP
    SecO PriP PriO])
    Subsystem: Device 1b4b:91a4
    Flags: fast devsel, IRQ 18
    I/O ports at d080 [size=8]
    I/O ports at d000 [size=4]
    I/O ports at cc00 [size=8]
    I/O ports at c880 [size=4]
    I/O ports at c800 [size=16]
    Memory at f9fff400 (32-bit, non-prefetchable) [size=16]
    Expansion ROM at f9fd0000 [disabled] [size=64K]
    Capabilities: <access denied>
    Kernel modules: ata_generic, pata_acpi

    Thanks!



    \
     
     \ /
      Last update: 2010-06-10 06:43    [W:0.030 / U:62.276 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site