lkml.org 
[lkml]   [2010]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: SSD + sata_nv + btrfs oops
    On 05/31/2010 09:04 PM, Dave Airlie wrote:
    > Hi guys,
    >
    > I've been running an Intel SSD (the KS one) on my Dell XPS710 desktop
    > machine, with btrfs on it.
    >
    > I'm not sure the btrfs oops isn't due to the disk/controller doing
    > something bad (almost guaranteed).
    >
    > Attached the dmesg + config, using 2.6.34 + only drm patches.
    >
    > Jeff I'd be interested in knowing what is happening to the disk before
    > btrfs oops.

    ata2: EH in SWNCQ mode,QC:qc_active 0x7FFFFE03 sactive 0x7FFFFE03
    ata2: SWNCQ:qc_active 0xFE00 defer_bits 0x7FFF0003 last_issue_tag 0xf
    dhfis 0x7E00 dmafis 0x200 sdbfis 0x0
    ata2: ATA_REG 0x40 ERR_REG 0x0
    ata2: tag : dhfis dmafis sdbfis sacitve
    ata2: tag 0x9: 1 1 0 1
    ata2: tag 0xa: 1 0 0 1
    ata2: tag 0xb: 1 0 0 1
    ata2: tag 0xc: 1 0 0 1
    ata2: tag 0xd: 1 0 0 1
    ata2: tag 0xe: 1 0 0 1
    ata2: tag 0xf: 0 0 0 1
    ata2.00: exception Emask 0x0 SAct 0x7ffffe03 SErr 0x1800000 action 0x6
    frozen
    ata2: SError: { LinkSeq TrStaTrns }

    Last line is probably the most informative, SATA link sequence error and
    transport state transition error. That's probably something bad
    happening at the low level between the controller and drive. Is this
    happening repeatedly?


    \
     
     \ /
      Last update: 2010-06-01 07:01    [W:0.023 / U:155.000 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site