lkml.org 
[lkml]   [2010]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] ad525x_dpot: add support for one time programmable pots
Date
From: Michael Hennerich <michael.hennerich@analog.com>

New parts supported:
AD5170, AD5171, AD5172, AD5173, AD5273

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
drivers/misc/Kconfig | 2 +-
drivers/misc/ad525x_dpot-i2c.c | 5 ++
drivers/misc/ad525x_dpot.c | 121 ++++++++++++++++++++++++++++++++++++++--
drivers/misc/ad525x_dpot.h | 42 +++++++++-----
4 files changed, 150 insertions(+), 20 deletions(-)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 233886d..26386a9 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -24,7 +24,7 @@ config AD525X_DPOT
AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
- ADN2860
+ ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173
digital potentiometer chips.

See Documentation/misc-devices/ad525x_dpot.txt for the
diff --git a/drivers/misc/ad525x_dpot-i2c.c b/drivers/misc/ad525x_dpot-i2c.c
index abba18e..374352a 100644
--- a/drivers/misc/ad525x_dpot-i2c.c
+++ b/drivers/misc/ad525x_dpot-i2c.c
@@ -97,6 +97,11 @@ static const struct i2c_device_id ad_dpot_id[] = {
{"ad5280", AD5280_ID},
{"ad5282", AD5282_ID},
{"adn2860", ADN2860_ID},
+ {"ad5273", AD5273_ID},
+ {"ad5171", AD5171_ID},
+ {"ad5170", AD5170_ID},
+ {"ad5172", AD5172_ID},
+ {"ad5173", AD5173_ID},
{}
};
MODULE_DEVICE_TABLE(i2c, ad_dpot_id);
diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c
index 3aa34c9..ee7a108 100644
--- a/drivers/misc/ad525x_dpot.c
+++ b/drivers/misc/ad525x_dpot.c
@@ -47,6 +47,11 @@
* AD5280 1 256 20, 50, 200
* AD5282 2 256 20, 50, 200
* ADN2860 3 512 25, 250
+ * AD5273 1 64 1, 10, 50, 100 (OTP)
+ * AD5171 1 64 5, 10, 50, 100 (OTP)
+ * AD5170 1 256 2.5, 10, 50, 100 (OTP)
+ * AD5172 2 256 2.5, 10, 50, 100 (OTP)
+ * AD5173 2 256 2.5, 10, 50, 100 (OTP)
*
* See Documentation/misc-devices/ad525x_dpot.txt for more info.
*
@@ -83,7 +88,8 @@ struct dpot_data {
unsigned uid;
unsigned feat;
unsigned wipers;
- u16 rdac_cache[8];
+ u16 rdac_cache[MAX_RDACS];
+ DECLARE_BITMAP(otp_en_mask, MAX_RDACS);
};

static inline int dpot_read_d8(struct dpot_data *dpot)
@@ -161,6 +167,15 @@ static s32 dpot_read_i2c(struct dpot_data *dpot, u8 reg)
ctrl = ((reg & DPOT_RDAC_MASK) == DPOT_RDAC0) ?
0 : DPOT_AD5291_RDAC_AB;
return dpot_read_r8d8(dpot, ctrl);
+ case DPOT_UID(AD5170_ID):
+ case DPOT_UID(AD5171_ID):
+ case DPOT_UID(AD5273_ID):
+ return dpot_read_d8(dpot);
+ case DPOT_UID(AD5172_ID):
+ case DPOT_UID(AD5173_ID):
+ ctrl = ((reg & DPOT_RDAC_MASK) == DPOT_RDAC0) ?
+ 0 : DPOT_AD5272_3_A0;
+ return dpot_read_r8d8(dpot, ctrl);
default:
if ((reg & DPOT_REG_TOL) || (dpot->max_pos > 256))
return dpot_read_r8d16(dpot, (reg & 0xF8) |
@@ -241,7 +256,7 @@ static s32 dpot_write_spi(struct dpot_data *dpot, u8 reg, u16 value)
static s32 dpot_write_i2c(struct dpot_data *dpot, u8 reg, u16 value)
{
/* Only write the instruction byte for certain commands */
- unsigned ctrl = 0;
+ unsigned tmp = 0, ctrl = 0;

switch (dpot->uid) {
case DPOT_UID(AD5246_ID):
@@ -260,6 +275,37 @@ static s32 dpot_write_i2c(struct dpot_data *dpot, u8 reg, u16 value)
0 : DPOT_AD5291_RDAC_AB;
return dpot_write_r8d8(dpot, ctrl, value);
break;
+ case DPOT_UID(AD5171_ID):
+ case DPOT_UID(AD5273_ID):
+ if (reg & DPOT_ADDR_OTP) {
+ tmp = dpot_read_d8(dpot);
+ if (tmp >> 6) /* Ready to Program? */
+ return -EFAULT;
+ ctrl = DPOT_AD5273_FUSE;
+ }
+ return dpot_write_r8d8(dpot, ctrl, value);
+ break;
+ case DPOT_UID(AD5172_ID):
+ case DPOT_UID(AD5173_ID):
+ ctrl = ((reg & DPOT_RDAC_MASK) == DPOT_RDAC0) ?
+ 0 : DPOT_AD5272_3_A0;
+ if (reg & DPOT_ADDR_OTP) {
+ tmp = dpot_read_r8d16(dpot, ctrl);
+ if (tmp >> 14) /* Ready to Program? */
+ return -EFAULT;
+ ctrl |= DPOT_AD5270_2_3_FUSE;
+ }
+ return dpot_write_r8d8(dpot, ctrl, value);
+ break;
+ case DPOT_UID(AD5170_ID):
+ if (reg & DPOT_ADDR_OTP) {
+ tmp = dpot_read_r8d16(dpot, tmp);
+ if (tmp >> 14) /* Ready to Program? */
+ return -EFAULT;
+ ctrl = DPOT_AD5270_2_3_FUSE;
+ }
+ return dpot_write_r8d8(dpot, ctrl, value);
+ break;
default:
if (reg & DPOT_ADDR_CMD)
return dpot_write_d8(dpot, reg);
@@ -291,6 +337,12 @@ static ssize_t sysfs_show_reg(struct device *dev,
struct dpot_data *data = dev_get_drvdata(dev);
s32 value;

+ if (reg & DPOT_ADDR_OTP_EN)
+ return sprintf(buf, "%s\n",
+ test_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask) ?
+ "enabled" : "disabled");
+
+
mutex_lock(&data->update_lock);
value = dpot_read(data, reg);
mutex_unlock(&data->update_lock);
@@ -319,6 +371,19 @@ static ssize_t sysfs_set_reg(struct device *dev,
unsigned long value;
int err;

+ if (reg & DPOT_ADDR_OTP_EN) {
+ if (!strncmp(buf, "enabled", sizeof("enabled")))
+ set_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask);
+ else
+ clear_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask);
+
+ return count;
+ }
+
+ if ((reg & DPOT_ADDR_OTP) &&
+ !test_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask))
+ return -EPERM;
+
err = strict_strtoul(buf, 10, &value);
if (err)
return err;
@@ -330,6 +395,8 @@ static ssize_t sysfs_set_reg(struct device *dev,
dpot_write(data, reg, value);
if (reg & DPOT_ADDR_EEPROM)
msleep(26); /* Sleep while the EEPROM updates */
+ else if (reg & DPOT_ADDR_OTP)
+ msleep(400); /* Sleep while the OTP updates */
mutex_unlock(&data->update_lock);

return count;
@@ -377,26 +444,38 @@ static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, NULL);
DPOT_DEVICE_SHOW_SET(rdac0, DPOT_ADDR_RDAC | DPOT_RDAC0);
DPOT_DEVICE_SHOW_SET(eeprom0, DPOT_ADDR_EEPROM | DPOT_RDAC0);
DPOT_DEVICE_SHOW_ONLY(tolerance0, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC0);
+DPOT_DEVICE_SHOW_SET(otp0, DPOT_ADDR_OTP | DPOT_RDAC0);
+DPOT_DEVICE_SHOW_SET(otp0en, DPOT_ADDR_OTP_EN | DPOT_RDAC0);

DPOT_DEVICE_SHOW_SET(rdac1, DPOT_ADDR_RDAC | DPOT_RDAC1);
DPOT_DEVICE_SHOW_SET(eeprom1, DPOT_ADDR_EEPROM | DPOT_RDAC1);
DPOT_DEVICE_SHOW_ONLY(tolerance1, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC1);
+DPOT_DEVICE_SHOW_SET(otp1, DPOT_ADDR_OTP | DPOT_RDAC1);
+DPOT_DEVICE_SHOW_SET(otp1en, DPOT_ADDR_OTP_EN | DPOT_RDAC1);

DPOT_DEVICE_SHOW_SET(rdac2, DPOT_ADDR_RDAC | DPOT_RDAC2);
DPOT_DEVICE_SHOW_SET(eeprom2, DPOT_ADDR_EEPROM | DPOT_RDAC2);
DPOT_DEVICE_SHOW_ONLY(tolerance2, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC2);
+DPOT_DEVICE_SHOW_SET(otp2, DPOT_ADDR_OTP | DPOT_RDAC2);
+DPOT_DEVICE_SHOW_SET(otp2en, DPOT_ADDR_OTP_EN | DPOT_RDAC2);

DPOT_DEVICE_SHOW_SET(rdac3, DPOT_ADDR_RDAC | DPOT_RDAC3);
DPOT_DEVICE_SHOW_SET(eeprom3, DPOT_ADDR_EEPROM | DPOT_RDAC3);
DPOT_DEVICE_SHOW_ONLY(tolerance3, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC3);
+DPOT_DEVICE_SHOW_SET(otp3, DPOT_ADDR_OTP | DPOT_RDAC3);
+DPOT_DEVICE_SHOW_SET(otp3en, DPOT_ADDR_OTP_EN | DPOT_RDAC3);

DPOT_DEVICE_SHOW_SET(rdac4, DPOT_ADDR_RDAC | DPOT_RDAC4);
DPOT_DEVICE_SHOW_SET(eeprom4, DPOT_ADDR_EEPROM | DPOT_RDAC4);
DPOT_DEVICE_SHOW_ONLY(tolerance4, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC4);
+DPOT_DEVICE_SHOW_SET(otp4, DPOT_ADDR_OTP | DPOT_RDAC4);
+DPOT_DEVICE_SHOW_SET(otp4en, DPOT_ADDR_OTP_EN | DPOT_RDAC4);

DPOT_DEVICE_SHOW_SET(rdac5, DPOT_ADDR_RDAC | DPOT_RDAC5);
DPOT_DEVICE_SHOW_SET(eeprom5, DPOT_ADDR_EEPROM | DPOT_RDAC5);
DPOT_DEVICE_SHOW_ONLY(tolerance5, DPOT_ADDR_EEPROM | DPOT_TOL_RDAC5);
+DPOT_DEVICE_SHOW_SET(otp5, DPOT_ADDR_OTP | DPOT_RDAC5);
+DPOT_DEVICE_SHOW_SET(otp5en, DPOT_ADDR_OTP_EN | DPOT_RDAC5);

static const struct attribute *dpot_attrib_wipers[] = {
&dev_attr_rdac0.attr,
@@ -418,6 +497,26 @@ static const struct attribute *dpot_attrib_eeprom[] = {
NULL
};

+static const struct attribute *dpot_attrib_otp[] = {
+ &dev_attr_otp0.attr,
+ &dev_attr_otp1.attr,
+ &dev_attr_otp2.attr,
+ &dev_attr_otp3.attr,
+ &dev_attr_otp4.attr,
+ &dev_attr_otp5.attr,
+ NULL
+};
+
+static const struct attribute *dpot_attrib_otp_en[] = {
+ &dev_attr_otp0en.attr,
+ &dev_attr_otp1en.attr,
+ &dev_attr_otp2en.attr,
+ &dev_attr_otp3en.attr,
+ &dev_attr_otp4en.attr,
+ &dev_attr_otp5en.attr,
+ NULL
+};
+
static const struct attribute *dpot_attrib_tolerance[] = {
&dev_attr_tolerance0.attr,
&dev_attr_tolerance1.attr,
@@ -467,6 +566,12 @@ __devinit int ad_dpot_add_files(struct device *dev,
if (features & F_CMD_TOL)
err |= sysfs_create_file(&dev->kobj,
dpot_attrib_tolerance[rdac]);
+ if (features & F_CMD_OTP) {
+ err |= sysfs_create_file(&dev->kobj,
+ dpot_attrib_otp_en[rdac]);
+ err |= sysfs_create_file(&dev->kobj,
+ dpot_attrib_otp[rdac]);
+ }

if (err)
dev_err(dev, "failed to register sysfs hooks for RDAC%d\n",
@@ -486,6 +591,12 @@ inline void ad_dpot_remove_files(struct device *dev,
if (features & F_CMD_TOL)
sysfs_remove_file(&dev->kobj,
dpot_attrib_tolerance[rdac]);
+ if (features & F_CMD_OTP) {
+ sysfs_remove_file(&dev->kobj,
+ dpot_attrib_otp_en[rdac]);
+ sysfs_remove_file(&dev->kobj,
+ dpot_attrib_otp[rdac]);
+ }
}

__devinit int ad_dpot_probe(struct device *dev,
@@ -513,7 +624,7 @@ __devinit int ad_dpot_probe(struct device *dev,
data->uid = DPOT_UID(data->devid);
data->wipers = DPOT_WIPERS(data->devid);

- for (i = DPOT_RDAC0; i <= DPOT_RDAC5; i++)
+ for (i = DPOT_RDAC0; i < MAX_RDACS; i++)
if (data->wipers & (1 << i)) {
err = ad_dpot_add_files(dev, data->feat, i);
if (err)
@@ -537,7 +648,7 @@ __devinit int ad_dpot_probe(struct device *dev,
return 0;

exit_remove_files:
- for (i = DPOT_RDAC0; i <= DPOT_RDAC5; i++)
+ for (i = DPOT_RDAC0; i < MAX_RDACS; i++)
if (data->wipers & (1 << i))
ad_dpot_remove_files(dev, data->feat, i);

@@ -556,7 +667,7 @@ __devexit int ad_dpot_remove(struct device *dev)
struct dpot_data *data = dev_get_drvdata(dev);
int i;

- for (i = DPOT_RDAC0; i <= DPOT_RDAC5; i++)
+ for (i = DPOT_RDAC0; i < MAX_RDACS; i++)
if (data->wipers & (1 << i))
ad_dpot_remove_files(dev, data->feat, i);

diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h
index d789a95..78b89fd 100644
--- a/drivers/misc/ad525x_dpot.h
+++ b/drivers/misc/ad525x_dpot.h
@@ -15,17 +15,18 @@
(((features) << 18) | (((wipers) & 0xFF) << 10) | \
((max_pos & 0xF) << 6) | (uid & 0x3F))

-#define DPOT_UID(conf) (conf & 0x3F)
-#define DPOT_MAX_POS(conf) ((conf >> 6) & 0xF)
-#define DPOT_WIPERS(conf) ((conf >> 10) & 0xFF)
-#define DPOT_FEAT(conf) (conf >> 18)
-
-#define BRDAC0 (1 << 0)
-#define BRDAC1 (1 << 1)
-#define BRDAC2 (1 << 2)
-#define BRDAC3 (1 << 3)
-#define BRDAC4 (1 << 4)
-#define BRDAC5 (1 << 5)
+#define DPOT_UID(conf) (conf & 0x3F)
+#define DPOT_MAX_POS(conf) ((conf >> 6) & 0xF)
+#define DPOT_WIPERS(conf) ((conf >> 10) & 0xFF)
+#define DPOT_FEAT(conf) (conf >> 18)
+
+#define BRDAC0 (1 << 0)
+#define BRDAC1 (1 << 1)
+#define BRDAC2 (1 << 2)
+#define BRDAC3 (1 << 3)
+#define BRDAC4 (1 << 4)
+#define BRDAC5 (1 << 5)
+#define MAX_RDACS 6

#define F_CMD_INC (1 << 0) /* Features INC/DEC ALL, 6dB */
#define F_CMD_EEP (1 << 1) /* Features EEPROM */
@@ -116,6 +117,11 @@ enum dpot_devid {
AD5282_ID = DPOT_CONF(F_RDACS_RW, BRDAC0 | BRDAC1, 8, 41),
ADN2860_ID = DPOT_CONF(F_RDACS_RW_TOL | F_CMD_INC,
BRDAC0 | BRDAC1 | BRDAC2, 9, 42),
+ AD5273_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0, 6, 43),
+ AD5171_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0, 6, 44),
+ AD5170_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0, 8, 45),
+ AD5172_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0 | BRDAC1, 8, 46),
+ AD5173_ID = DPOT_CONF(F_RDACS_RW | F_CMD_OTP, BRDAC0 | BRDAC1, 8, 47),
};

#define DPOT_RDAC0 0
@@ -136,9 +142,11 @@ enum dpot_devid {
#define DPOT_TOL_RDAC5 (DPOT_REG_TOL | DPOT_RDAC5)

/* RDAC-to-EEPROM Interface Commands */
-#define DPOT_ADDR_RDAC (0x00 << 5)
-#define DPOT_ADDR_EEPROM (0x01 << 5)
-#define DPOT_ADDR_CMD (0x80)
+#define DPOT_ADDR_RDAC (0x0 << 5)
+#define DPOT_ADDR_EEPROM (0x1 << 5)
+#define DPOT_ADDR_OTP (0x1 << 6)
+#define DPOT_ADDR_CMD (0x1 << 7)
+#define DPOT_ADDR_OTP_EN (0x1 << 9)

#define DPOT_DEC_ALL_6DB (DPOT_ADDR_CMD | (0x4 << 3))
#define DPOT_INC_ALL_6DB (DPOT_ADDR_CMD | (0x9 << 3))
@@ -161,6 +169,12 @@ enum dpot_devid {
/* AD524x use special commands */
#define DPOT_AD5291_RDAC_AB 0x80

+#define DPOT_AD5273_FUSE 0x80
+#define DPOT_AD5270_2_3_FUSE 0x20
+#define DPOT_AD5270_2_3_OW 0x08
+#define DPOT_AD5272_3_A0 0x08
+#define DPOT_AD5270_2FUSE 0x80
+
struct dpot_data;

struct ad_dpot_bus_ops {
--
1.7.1


\
 
 \ /
  Last update: 2010-05-09 12:15    [W:0.042 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site