lkml.org 
[lkml]   [2010]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCHv2 1/7] HSI: Introducing HSI framework
On Fri,  7 May 2010 18:18:31 +0300 Carlos Chinea wrote:

> Adds HSI framework in to the linux kernel.
>
> High Speed Synchronous Serial Interface (HSI) is a
> serial interface mainly used for connecting application
> engines (APE) with cellular modem engines (CMT) in cellular
> handsets.
>
> HSI provides multiplexing for up to 16 logical channels,
> low-latency and full duplex communication.
>
> Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
> ---
> drivers/Kconfig | 2 +
> drivers/Makefile | 1 +
> drivers/hsi/Kconfig | 13 ++
> drivers/hsi/Makefile | 4 +
> drivers/hsi/hsi.c | 489 +++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/hsi/hsi.h | 369 +++++++++++++++++++++++++++++++++++
> 6 files changed, 878 insertions(+), 0 deletions(-)
> create mode 100644 drivers/hsi/Kconfig
> create mode 100644 drivers/hsi/Makefile
> create mode 100644 drivers/hsi/hsi.c
> create mode 100644 include/linux/hsi/hsi.h
>
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index a2b902f..4fe39f9 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -50,6 +50,8 @@ source "drivers/i2c/Kconfig"
>
> source "drivers/spi/Kconfig"
>
> +source "drivers/hsi/Kconfig"
> +
> source "drivers/pps/Kconfig"
>
> source "drivers/gpio/Kconfig"
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 2c4f277..24ca5bd 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_SCSI) += scsi/
> obj-$(CONFIG_ATA) += ata/
> obj-$(CONFIG_MTD) += mtd/
> obj-$(CONFIG_SPI) += spi/
> +obj-$(CONFIG_HSI) += hsi/
> obj-y += net/
> obj-$(CONFIG_ATM) += atm/
> obj-$(CONFIG_FUSION) += message/
> diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig
> new file mode 100644
> index 0000000..5af62ce
> --- /dev/null
> +++ b/drivers/hsi/Kconfig
> @@ -0,0 +1,13 @@
> +#
> +# HSI driver configuration
> +#
> +menuconfig HSI
> + bool "HSI support"

Why is this bool instead of tristate?
IOW, why can it not be built as a loadable module?


> + ---help---
> + The "High speed synchronous Serial Interface" is
> + synchronous serial interface used mainly to connect
> + application engines and cellular modems.
> +
> +if HSI
> +
> +endif # HSI
> diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile
> new file mode 100644
> index 0000000..b42b6cf
> --- /dev/null
> +++ b/drivers/hsi/Makefile
> @@ -0,0 +1,4 @@
> +#
> +# Makefile for HSI
> +#
> +obj-$(CONFIG_HSI) += hsi.o


---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***


\
 
 \ /
  Last update: 2010-05-07 17:31    [W:0.140 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site