lkml.org 
[lkml]   [2010]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Staging: comedi: Fixed long line lengths in comedi.h
Date
This patches fixes some of the long line lengths that checkpatch.pl was
complaining about in comedi.h

Signed-off-by: Mark Rankilor <reodge@gmail.com>
---
drivers/staging/comedi/comedi.h | 26 +++++++++++++++++---------
1 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index 8e4caaa..20a6fee 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -46,8 +46,10 @@
#define COMEDI_DEVCONF_AUX_DATA2_LENGTH 26
#define COMEDI_DEVCONF_AUX_DATA1_LENGTH 27
#define COMEDI_DEVCONF_AUX_DATA0_LENGTH 28
-#define COMEDI_DEVCONF_AUX_DATA_HI 29 /* most significant 32 bits of pointer address (if needed) */
-#define COMEDI_DEVCONF_AUX_DATA_LO 30 /* least significant 32 bits of pointer address */
+/* most significant 32 bits of pointer address (if needed) */
+#define COMEDI_DEVCONF_AUX_DATA_HI 29
+/* least significant 32 bits of pointer address */
+#define COMEDI_DEVCONF_AUX_DATA_LO 30
#define COMEDI_DEVCONF_AUX_DATA_LENGTH 31 /* total data length */

/* max length of device and driver names */
@@ -55,8 +57,10 @@

/* packs and unpacks a channel/range number */

-#define CR_PACK(chan, rng, aref) ((((aref)&0x3)<<24) | (((rng)&0xff)<<16) | (chan))
-#define CR_PACK_FLAGS(chan, range, aref, flags) (CR_PACK(chan, range, aref) | ((flags) & CR_FLAGS_MASK))
+#define CR_PACK(chan, rng, aref) \
+ ((((aref)&0x3)<<24) | (((rng)&0xff)<<16) | (chan))
+#define CR_PACK_FLAGS(chan, range, aref, flags) \
+ (CR_PACK(chan, range, aref) | ((flags) & CR_FLAGS_MASK))

#define CR_CHAN(a) ((a)&0xffff)
#define CR_RANGE(a) (((a)>>16)&0xff)
@@ -125,7 +129,8 @@
/* command flags */
/* These flags are used in comedi_cmd structures */

-#define CMDF_PRIORITY 0x00000008 /* try to use a real-time interrupt while performing command */
+/* try to use a real-time interrupt while performing command */
+#define CMDF_PRIORITY 0x00000008

#define TRIG_RT CMDF_PRIORITY /* compatibility definition */

@@ -242,15 +247,18 @@
INSN_CONFIG_DISARM = 32,
INSN_CONFIG_GET_COUNTER_STATUS = 33,
INSN_CONFIG_RESET = 34,
- INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001, /* Use CTR as single pulsegenerator */
- INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002, /* Use CTR as pulsetraingenerator */
- INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003, /* Use the counter as encoder */
+ /* Use CTR as single pulsegenerator */
+ INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001,
+ /* Use CTR as pulsetraingenerator */
+ INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002,
+ /* Use the counter as encoder */
+ INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003,
INSN_CONFIG_SET_GATE_SRC = 2001, /* Set gate source */
INSN_CONFIG_GET_GATE_SRC = 2002, /* Get gate source */
INSN_CONFIG_SET_CLOCK_SRC = 2003, /* Set master clock source */
INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */
INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */
- /* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */
+ /* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */
INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006, /* Get size in bytes of
subdevice's on-board
fifos used during
--
1.7.0.5


\
 
 \ /
  Last update: 2010-05-06 12:11    [W:0.227 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site