Messages in this thread | | | Subject | Re: [PATCHv2 0/2] mtd: nand: Extend MLC support | From | Artem Bityutskiy <> | Date | Wed, 05 May 2010 15:19:20 +0300 |
| |
On Tue, 2010-05-04 at 20:58 -0700, Kevin Cernekee wrote: > Part 1/2 is an improved version of my previous submission. Additional > checks were added to ensure that certain "5-byte" Micron and Samsung > parts are not falsely detected as having 6-byte IDs. I also rolled in > the 256B NAND_MAX_OOBSIZE change. > > Part 2/2 is a resubmission/rebase of Reuben Dowle's 2009/02/03 patch: > > http://lists.infradead.org/pipermail/linux-mtd/2009-February/024473.html > > I am trying to compile a table of NAND IDs to make sure the detection > algorithm correctly handles all known cases. If you could send me the > following information for any NAND chips you have access to (via > private email), it would be appreciated: > > 1) Part number > > 2) ID code (please read 8 bytes so I can see where it wraps around) > > 3) Device size, block size, page size, OOB bytes per page, bus width, > and bad block marker location > > 4) Datasheet, if available
Removed older patches and taken these ones to l2-mtd-2.6 / dunno.
-- Best Regards, Artem Bityutskiy (Артём Битюцкий)
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |