lkml.org 
[lkml]   [2010]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2] misc : ROHM BH1780GLI Ambient light sensor Driver
On 05/26/10 09:30, Hemanth V wrote:
>> From: Hemanth V <hemanthv@ti.com>
>> Date: Fri, 21 May 2010 15:52:03 +0530
>> Subject: [PATCH] misc: ROHM BH1780GLI Ambient light sensor Driver
>>
>> This patch adds support for ROHM BH1780GLI Ambient light sensor.
>>
>> BH1780 supports I2C interface. Driver supports read/update of power state and
>> read of lux value (through SYSFS). Writing value 3 to power_state enables the
>> sensor and current lux value could be read.
>>
> Jonathan, Daniel
>
> If there are no more comments, do you know howto push this to linus tree.
It's in misc, so send a copy (with reference back to review thread)
to Andrew Morton <akpm@linux-foundation.org>

Andrew tends to pick things up eventually for lkml, but he'll notice
it quicker if you cc him in on relevant emails!

Jonathan
>
> Thanks
> Hemanth
>
>> Signed-off-by: Hemanth V <hemanthv@ti.com>
>> Reviewed-by: Daniel Mack <daniel@caiaq.de>
>> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
>> ---
>> drivers/misc/Kconfig | 10 ++
>> drivers/misc/Makefile | 1 +
>> drivers/misc/bh1780gli.c | 273 ++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 284 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/misc/bh1780gli.c
>>
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index 0d0d625..3f5bf0f 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -278,6 +278,16 @@ config SENSORS_TSL2550
>> This driver can also be built as a module. If so, the module
>> will be called tsl2550.
>>
>> +config SENSORS_BH1780
>> + tristate "ROHM BH1780GLI ambient light sensor"
>> + depends on I2C && SYSFS
>> + help
>> + If you say yes here you get support for the ROHM BH1780GLI
>> + ambient light sensor.
>> +
>> + This driver can also be built as a module. If so, the module
>> + will be called bh1780gli.
>> +
>> config EP93XX_PWM
>> tristate "EP93xx PWM support"
>> depends on ARCH_EP93XX
>> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
>> index 7b6f7ee..c479d91 100644
>> --- a/drivers/misc/Makefile
>> +++ b/drivers/misc/Makefile
>> @@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
>> obj-y += eeprom/
>> obj-y += cb710/
>> obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
>> +obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o
>> diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
>> new file mode 100644
>> index 0000000..774531d
>> --- /dev/null
>> +++ b/drivers/misc/bh1780gli.c
>> @@ -0,0 +1,273 @@
>> +/*
>> + * bh1780gli.c
>> + * ROHM Ambient Light Sensor Driver
>> + *
>> + * Copyright (C) 2010 Texas Instruments
>> + * Author: Hemanth V <hemanthv@ti.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/i2c.h>
>> +#include <linux/slab.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>> +
>> +#define BH1780_REG_CONTROL 0x80
>> +#define BH1780_REG_PARTID 0x8A
>> +#define BH1780_REG_MANFID 0x8B
>> +#define BH1780_REG_DLOW 0x8C
>> +#define BH1780_REG_DHIGH 0x8D
>> +
>> +#define BH1780_REVMASK (0xf)
>> +#define BH1780_POWMASK (0x3)
>> +#define BH1780_POFF (0x0)
>> +#define BH1780_PON (0x3)
>> +
>> +/* power on settling time in ms */
>> +#define BH1780_PON_DELAY 2
>> +
>> +struct bh1780_data {
>> + struct i2c_client *client;
>> + int power_state;
>> + /* lock for sysfs operations */
>> + struct mutex lock;
>> +};
>> +
>> +static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg)
>> +{
>> + int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
>> + if (ret < 0)
>> + dev_err(&ddata->client->dev,
>> + "i2c_smbus_write_byte_data failed error %d\
>> + Register (%s)\n", ret, msg);
>> + return ret;
>> +}
>> +
>> +static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
>> +{
>> + int ret = i2c_smbus_read_byte_data(ddata->client, reg);
>> + if (ret < 0)
>> + dev_err(&ddata->client->dev,
>> + "i2c_smbus_read_byte_data failed error %d\
>> + Register (%s)\n", ret, msg);
>> + return ret;
>> +}
>> +
>> +static ssize_t bh1780_show_lux(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> + int lsb, msb;
>> +
>> + lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW");
>> + if (lsb < 0)
>> + return lsb;
>> +
>> + msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH");
>> + if (msb < 0)
>> + return msb;
>> +
>> + return sprintf(buf, "%d\n", (msb << 8) | lsb);
>> +}
>> +
>> +static ssize_t bh1780_show_power_state(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> + int state;
>> +
>> + state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
>> + if (state < 0)
>> + return state;
>> +
>> + return sprintf(buf, "%d\n", state & BH1780_POWMASK);
>> +}
>> +
>> +static ssize_t bh1780_store_power_state(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct bh1780_data *ddata = platform_get_drvdata(pdev);
>> + unsigned long val;
>> + int error;
>> +
>> + error = strict_strtoul(buf, 0, &val);
>> + if (error)
>> + return error;
>> +
>> + if (val < BH1780_POFF || val > BH1780_PON)
>> + return -EINVAL;
>> +
>> + mutex_lock(&ddata->lock);
>> +
>> + error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL");
>> + if (error < 0) {
>> + mutex_unlock(&ddata->lock);
>> + return error;
>> + }
>> +
>> + msleep(BH1780_PON_DELAY);
>> + ddata->power_state = val;
>> + mutex_unlock(&ddata->lock);
>> +
>> + return count;
>> +}
>> +
>> +static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL);
>> +
>> +static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
>> + bh1780_show_power_state, bh1780_store_power_state);
>> +
>> +static struct attribute *bh1780_attributes[] = {
>> + &dev_attr_power_state.attr,
>> + &dev_attr_lux.attr,
>> + NULL
>> +};
>> +
>> +static const struct attribute_group bh1780_attr_group = {
>> + .attrs = bh1780_attributes,
>> +};
>> +
>> +static int __devinit bh1780_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + int ret;
>> + struct bh1780_data *ddata = NULL;
>> + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
>> +
>> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
>> + ret = -EIO;
>> + goto err_op_failed;
>> + }
>> +
>> + ddata = kzalloc(sizeof(struct bh1780_data), GFP_KERNEL);
>> + if (ddata == NULL) {
>> + ret = -ENOMEM;
>> + goto err_op_failed;
>> + }
>> +
>> + ddata->client = client;
>> + i2c_set_clientdata(client, ddata);
>> +
>> + ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID");
>> + if (ret < 0)
>> + goto err_op_failed;
>> +
>> + dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n",
>> + (ret & BH1780_REVMASK));
>> +
>> + mutex_init(&ddata->lock);
>> +
>> + ret = sysfs_create_group(&client->dev.kobj, &bh1780_attr_group);
>> + if (ret)
>> + goto err_op_failed;
>> +
>> + return 0;
>> +
>> +err_op_failed:
>> + kfree(ddata);
>> + return ret;
>> +}
>> +
>> +static int __devexit bh1780_remove(struct i2c_client *client)
>> +{
>> + struct bh1780_data *ddata;
>> +
>> + ddata = i2c_get_clientdata(client);
>> + sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
>> + i2c_set_clientdata(client, NULL);
>> + kfree(ddata);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
>> +{
>> + struct bh1780_data *ddata;
>> + int state, ret;
>> +
>> + ddata = i2c_get_clientdata(client);
>> + state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
>> + if (state < 0)
>> + return state;
>> +
>> + ddata->power_state = state & BH1780_POWMASK;
>> +
>> + ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF,
>> + "CONTROL");
>> +
>> + if (ret < 0)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +
>> +static int bh1780_resume(struct i2c_client *client)
>> +{
>> + struct bh1780_data *ddata;
>> + int state, ret;
>> +
>> + ddata = i2c_get_clientdata(client);
>> + state = ddata->power_state;
>> +
>> + ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
>> + "CONTROL");
>> +
>> + if (ret < 0)
>> + return ret;
>> +
>> + return 0;
>> +}
>> +#else
>> +#define bh1780_suspend NULL
>> +#define bh1780_resume NULL
>> +#endif /* CONFIG_PM */
>> +
>> +static const struct i2c_device_id bh1780_id[] = {
>> + { "bh1780", 0 },
>> + { },
>> +};
>> +
>> +static struct i2c_driver bh1780_driver = {
>> + .probe = bh1780_probe,
>> + .remove = bh1780_remove,
>> + .id_table = bh1780_id,
>> + .suspend = bh1780_suspend,
>> + .resume = bh1780_resume,
>> + .driver = {
>> + .name = "bh1780"
>> + },
>> +};
>> +
>> +static int __init bh1780_init(void)
>> +{
>> + return i2c_add_driver(&bh1780_driver);
>> +}
>> +
>> +static void __exit bh1780_exit(void)
>> +{
>> + i2c_del_driver(&bh1780_driver);
>> +}
>> +
>> +module_init(bh1780_init)
>> +module_exit(bh1780_exit)
>> +
>> +MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
>> --
>> 1.5.6.3
>>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/



\
 
 \ /
  Last update: 2010-05-26 11:39    [W:0.058 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site